• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.191-199
• /
• 2020

Currently, studies on the estimation algorithm based on compressive sensing are actively underway, but to the best of our knowledge, no study on the performance of the Sparse Spectrum Fitting (SpSF) algorithm in nonuniform sensor arrays has been made. This paper deals with the derivation of the compressive sensing based covariance fitting algorithm extended to the frequency domain. In addition, it shows the performance of directon-of-arrival estimation of the frequency domain SpSF algorithm in non-uniform linear sensor array system and the sensor array failure situation.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.370-375
• /
• 2004

This paper proposes an algorithm that estimates three dimensional array shape calibration about the bottom-mounted sensor array. under the assumption that the active sources are in the far-field with unknown positions. Under some assumptions. we calculate the sensor positions via an algebraic solutions of a least squares problem that the linear equations are related to the sensor positions and directions or arrival. We give examples of algorithm performance from both computer simulations and sea test. We also illustrate the performance of sensor positions estimation as a function of time delay estimation variance and the distribution of the localizing sources.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.288-294
• /
• 2015

The fiber optic Sagnac interferometer is well established as a sensor for detection of physical perturbations such as acoustic and vibration. In this paper acoustic signals generated in the cylindrical cavity submerged in transformer oil were measured by the fiber optic sensor array in one Sagnac loop. Two different external sound frequencies, $f_1$ and $f_2$, were applied to the sensor array simultaneously by using piezoelectric with frequency range from 5 kHz to 90 kHz. Based on the experimental results, fiber optic sensor detected harmonic series of applied sound frequency such as $f_1$, $f_2$, $2f_1$, $2f_2$, ${\mid}f_1-f_2{\mid}$, ${\mid}f_1+f_2{\mid}$. Suggested fiber optic sensor array can be applied to monitor physical quantities such as internal sound pressure and vibration due to partial discharge in the real electric transformer system.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.83-91
• /
• 2001

This paper proposes the Focused beamforming to estimate the location of target residing near to the observation platform in the underwater environment. The Focused beamforming technique provides the location of target by the coherent summation of a series of incident spherical waveforms considering distinct propagation delay times at the sensor array. But due to the movement of the observation platform and the variation of the underwater environment, the shape of the sensor array is no longer to be linear but it becomes distorted as the platform moves. Thus the Focused beamforming should be peformed regarding to the geometric shape variation at each time. To estimate the target location, the artificial image plane comprised of cells is constructed, and the delays are calculated from each cell where the target could be proximity to sensors for the coherent summation. After the coherent combining, the beam pattern can be obtained through the Focused beamforming on the image plane. Futhermore to compensate the variation of the shape of the sensor array, the paper utilizes the Nth-order polynomial approximation to estimate the shape of the sensor array obeying the water pulley modeling. Simulation results show the performance of the Focused beamforming for different frequency bands of the radiated signal.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.30-38
• /
• 2017

In this paper, we propose an underwater acoustic sensor fault detection method for passive sonar systems. In general, a passive sonar system displays processed results of array signals obtained from tens of the acoustic sensors as a two-dimensional image such as displays for broadband or narrowband analysis. Since detection result display in the operation software is to display the accumulated result through the array signal processing, it is difficult to determine the possibility where signal may be contaminated by the fault or failure of a single channel sensor. In this paper, accordingly, we propose a detection method based on the analysis of RMSCR (Root Mean Square Crossing-Rate), and the processing techniques for the faulty sensors are analyzed. In order to evaluate the performance of the proposed method, the precision of detecting fault sensors is measured by using signals acquired from real array being operated in several coastal areas. Besides, we compare performance of fault processing techniques. From the experiments, it is shown that the proposed method works well in underwater environments with high average RMS, and mute (set to zero) shows the best performance with regard to fault processing techniques.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.1
• /
• pp.25-31
• /
• 1999

This paper proposes a new wide-band beamforming algorithm which has Gaussian weighting at nested linear array for acoustic measurement. The beamforming is performed one-shot by using all sensors simultaneously, not octave-by-octave. Gaussian weighting of frequency-dependent function is applied to each sensor before time-delay compensation so as to control the frequency receiving band of each sensor. As the results of the simulations, it is confirmed that the proposed algorithm can form the one-shot beams having uniform directivity index and also it can be applied to the broad-band acoustic measurement.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.487-490
• /
• 1998

본 논문에서는 천해 환경에서 multitone MFP를 하기 위한 다양한 시뮬레이션을 수행하고 여러 관점에서 multitone MFP의 성능을 분석하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.115-122
• /
• 2017

We propose a robust adaptive beamforming algorithm for triplet array sonar. The proposed beamforming algorithm obtains robustness to mismatches, left/right discrimination, and has two steps. The first is a cardioid beamformer, which supports left/right discrimination of target signals. It applies the conventional delay-and-subtract to each triplet's signal with its rotation angle and obtains multiple cardioid beams. The second is a robust adaptive beamforming to minimize nearby interferences. We regard cardioid beams as input signals of a line array and apply an adaptive beamforming algorithm to the cardioid beams. Simulations results show that the proposed algorithm provides significantly better performance than the conventional algorithms, while supporting left/right discrimination of target signals.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.214-220
• /
• 2004

A computationally efficient algorithm is presented for 3-D near-field source localization using a uniform circular away (UCA). Algebraic relations are demonstrated between the incident angles (elevation angle and azimuth angle) under the far-field assumption and the actual near-field location (range. elevation angle, and azimuth angle). Using these relations as paths to follow to the peak of the 3-D MUSIC spectrum, the proposed algorithm replaces the 3-D search required in the conventional 3-D MUSIC with a 1-D path following after a 2-D initialization. thereby reducing the computational burden.