• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.461-464
• /
• 1998

수중 프로펠러의 비공동 소음을 수치적으로 해석하였다. Ffowcs Williams-Hawkings 형태의 음향상사 방정식을 시간영역에서 해석하였으며 임의의 형상과 하중조건을 가지는 프로펠러의 소음 예측이 가능하도록 하였다. 또한 좌표계 변환을 통해 관찰자에 대해 상대적 운동이 있는 경우에도 소음 예측이 가능하도록 하였다. 균일/비균일 유입류 조건을 갖는 수중 프로펠러에 대해 소음 해석을 수행하였고 각각의 조건에 대해 음원별 소음 강도와 방향성을 예측하였다. 수치 해석결과 프로펠러 표면상의 압력 변화에 따른 비정상 하중에 의한 이중극 소음이 지배적인 것으로 나타났다. 이러한 음원별 접근법은 수중 프로펠러의 운용시 지배적인 소음원을 구별하고 그 특성을 파악하여 적절한 소음 제어책을 마련하는 기반이 될 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.14-21
• /
• 2013

The erosion, suspension, and transport of sediment frequently occur in the coastal waters and estuarine. These processes often generate the so-called fluid mud layer, which is defined as a high-concentration aqueous suspension of fine grained sediment (> 10 g/l), consisting mainly of silt and clay-size particles. Therefore the high-resolution ultrasound is mostly used to detect or monitor the fluid mud layer. Because the sound attenuation tends to increase rapidly with the suspended sediment concentration, it is necessary to consider the accurate attenuation correction to estimate the backscattering strengths from the suspended sediment layers. In this paper, the volume backscattering strengths with various suspended sediment concentrations were measured using 5-MHz ultrasound signal in a small-scale water tank. The sound attenuation due to the viscosity and scattering from suspended sediment particles was predicted by the Richard's model and applied to the sonar equation to estimate the volume backscattering strengths from the suspended sediment concentrations. For the case that the additional attenuation was not considered, the volume backscattering strengths increased to the concentration of 20 g/l, and over this point, the backscattering strengths were roughly constant. However, for the case that the attenuation due to the suspended sediment concentration was considered, the backscattering strengths increased with the concentration.

• Korean Journal of Materials Research
• /
• v.6 no.3
• /
• pp.245-252
• /
• 1996

본 연구는 화강암 폐재의 재활용을 목적으로 한 기초적인 연구로서, 분말형태의 화강암폐재를 Ca(OH2)와 혼합하여 수열 hot press 법에 의해 고화시켰다. 아울러 고화체의 기계적 성질을 평가하였으며, 미시적 조직구조의 변화 및 파괴거동을 파악하기 위해 음향방출실험을 실시하였다. 고화체의 기계적 성질은 수열온도의 의존성이 있었으며, 28$0^{\circ}C$에서 최대강도를 보였다. 또한 고화체의 파면은 수열온도에 따라 현저히 다른 양상을 보였으며, 수열실험동안 다양한 화합물이 생성되었다. 그 중에서 cyclowollastonite, tobermorite 및 rankinite 등은 강도를 향상시키는 주된 화합물이었고, crossite 및 xonotlite 등은 강도의 저하를 초래하였다. 한편, 기공이 많이 존재할수록 AE counts는 더많이 발생하였으며, 최대하중에서 AE counts는 최대치를 보였고, 강도가 증가함에 따라 AE신호는 보다 많이 방출되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.160-168
• /
• 2010

An experimental study has been conducted to investigate the effects of forcing amplitude on the tone-excited non-premixed jet flame of the resonance frequency. Visualization techniques are employed using the laser optic systems, which are RMS tomography, PLIF and PIV system. There are three lift-off histories according to the fuel flow rates and forcing amplitudes; the regime I always has the flame base feature like turbulent flame when the flame lift-off, while the flame easily lift-off in the regime II even if a slight forcing amplitude applied. The other is a transient regime and occurs between the regime I and regime II, which has the flame base like the bunsen flame of partial premixed flame. In the regime I and II, the characteristics of the mixing and velocity profile according to the forcing phase were investigated by the acetone PLIF, PIV system. Particular understanding is focused on the distinction of lift-off history in the regime I and II.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.150-156
• /
• 2015

In this study, the effects of different mix proportions and fire scenarios (exposure temperatures and post-fire-curing periods) on fire-damaged concrete were analyzed using a nonlinear resonance vibration method based on nonlinear acoustics. The hysteretic nonlinearity parameter was obtained, which can sensitively reflect the damage level of fire-damaged concrete. In addition, a splitting tensile strength test was performed on each fire-damaged specimen to evaluate the residual property. Using the results, a prediction model for estimating the residual strength of fire-damaged concrete was proposed on the basis of the correlation between the hysteretic nonlinearity parameter and the ratio of splitting tensile strength.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2006.05a
• /
• pp.37-38
• /
• 2006

• Proceedings of the KSLP Conference
• /
• 2003.11a
• /
• pp.187-189
• /
• 2003

제목 음도 고정시 강도변화 <음도> Vocal Pitch 정상성인의 비음도 저항(Impedance)$\rightarrow$임피던스, Jitter : 주파수의 섭동정도 cycle to cycle frequency perturbation, 주기적 펄스파형의 폭, 주파수, 위상이 잡음 등에 의해 정상위치를 약간 벗어나는 현상 또는 변도량을 말한다. Shimmer : 진폭의 섭동정도 (중략)

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2005.11a
• /
• pp.3-6
• /
• 2005

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.113-122
• /
• 2010

Corrosion of prestressing tendons and wire fractures in grouted post-tensioned prestressed concrete bridges have been considered as a serious safety problem. In bridge evaluation the condition of prestressing tendons should be inspected, and if corroded tendons are found, the loss of tendon area should be included when we calculate the ultimate strength. In the previous study, it was evaluated that continuous acoustic monitoring techniques could be considered as a reliable non-destructive method for detecting wire fractures of fully grouted post-tensioned prestressing tendons. In the present study, an experimental test was performed for detecting wire fractures of post-tensioned prestressing tendons which are prestressed lower than current design level. A 10 m prestressed concrete beam was fabricated, which included two tendons prestressed 66 percentage and 40 percentage of tensile strength, respectively. The corrosion of two tendons was induced by an accelerated corrosion equipment and the test beam was monitored by using seven acoustic sensors and a continuous acoustic monitoring system. From each prestressing tendon, two acoustic signals of wire fractures were successfully detected and source locations were estimated within 20 mm error. Based on the test results, it is considered that continuous acoustic monitoring techniques can be applied to detect low-prestressed wire fracture in fully grouted post-tensioned prestressed concrete beams.

• Composites Research
• /
• v.14 no.6
• /
• pp.1-8
• /
• 2001

In this paper, the sandwich panel composites consisting of core material and face sheet were studied to evaluate the mechanical properties, noise level and fire resistance including flammability, smoke, and toxicity. Four types of sandwich panel were prepared using various kinds of panel and honeycomb materials. It was observed that Al honeycomb/Al skin composite materials had the excellent flatwise tensile strength and edgewise compressive strength compared with other types of composites. The flatwise compressive strength and flexural strength of Nomex honeycomb/Al skin composite were higher than those of other composites. PMI form/Al skin composite showed the higher core shear strength and facing bending strength. From the experimental results of flame resistance tests, it can be said that the phenol based skin composite has the excellent flame retardation properties, which are similar to those of the commercial skin composites.