• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.404-408
• /
• 2004

인공순환수로 실험구간에 반구구조물을 설치하지 않은 경우와 설치할 경우의 흐름특성을 분석하기 위하여 수치모의를 수행하였다. 수치모의는 FLUNET가 제공하는 RNG $k-\varepsilon$ 모형과 Reynolds Stress 모형을 사용하였으며 음파유속계(ADV)를 이용하여 측정한 결과와 비교분석 하였다. 수치모의와 실험결과의 상관성을 분석한 길과, RNG $k-\varepsilon$과 Reynolds Stress 모형의 계산결과와 실측값의 상관계수는 반구구조물을 설치하지 않은 경우 0.60 - 0.63, 반구구조물을 설치한 경우 0.75 - 0.78로 큰 차이가 없었다. 그러나 계산반복회수의 경우 RNG $k-\varepsilon$ 모형이 Reynolds Stress 모형에 비하여 2 - 5배 정도 빠르다. 두 모형의 걸과가 크게 차이가 나지 않으므로 순환수로 내의 흐름특성을 분석하기 위한 모형으로 수렴속도가 빠른 RNG $k-\varepsilon$ 모형을 선정하였다. 수치모의 결과와 "흐름 메카니즘에 의한 깔따구의 분포(I)- 실험"의 깔따구 분포경향을 비교한 결과 깔따구는 전반적으로 유속과 난류강도가 작은 곳에 분포하였으며 실험구간에 반구구조물이 있는 경우에는 구조물의 상${\cdot}$하류에 깔따구가 분포하였다. 이차류 또한 깔따구의 분포에 영향을 미친다. 향후 흐름특성에 따른 저서생물의 분포경향을 분석을 위하여 전산유체역학의 기법들을 적용하면 깔따구 등의 저서성 대형무척추 동물의 분포와 흐름특성의 관계를 저렴한 비용으로 분석할 수 있을 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1042-1050
• /
• 2014

The performance of underwater acoustic(UWA) communication system is sensitive to the Inter-Symbol Interference(ISI) due to delay spread develop of multipath signal propagation. And due to limited frequency using acoustic wave, UWA is a low transmission rate. Thus, it is necessary technique of Space-time code, equalizer and channel code to improve transmission speed and eliminate ISI. In this paper, UWA communication system were analyzed by simulation using these techniques. In the result of simulation, the proposed Turbo Equalization method based on layered Space Time Codes has improved performance compared to conventional UWA communication.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.24-29
• /
• 2004

In ocean acoustic tomography (OAT), the pulse compression techniques using M-sequences are employed in the many studies for investigating the ocean structures. M-sequences can provide the good time and Doppler resolution in the process of demodulation using matched-filter. The signal-to-noise (SNR) performance at the output of receiver may be improved by manipulating received signal, i. e. coherently averaging. The processing time can be significantly reduced by using fast hadarmard transform (FHT) or fast Fourier transform (FFT). In this paper, we estimate the multipath arrival structures and delay times using the East Korean Sea experiment data and explore the compensation method for the detrimental effects on performance due to sampling rate error. We also analyze the characteristics of the ocean acoustic channels through scattering function, delay power profile, and time dispersions.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.833-840
• /
• 2004

Among non-destructive tests for compressive strength, rebound number test and pulse velocity test are the most widely used methods. However, the non-destructive tests mostly used in Korea was developed by foreign country. Therefore, it is unreasonable to directly apply them to concrete structures in Korea. In accordance with the suggestion of Institute of Architecture in Japan for rebound number test, a compressive strength is calculated by the mean value of 20 hit points without being considered standard deviation. Furthermore, there is no regulation on the number of measurements required for measuring compressive strength by pulse velocity test. This study, therefore, reviewed the rebound number test and pulse velocity test by chi-square, and suggested the minimum number of each test. As a result, the minimum number that falls within range of reliability for rebound number test and pulse velocity test are 11 and 7, respectively. If abnormal values are processed as missing and test groups are assumed to be arrayed in cross by considering changes in quality of actual concrete structures, 20 times and 9 times are appropriate for rebound number test and pulse velocity test, respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.436-442
• /
• 2008

Graphite material has been recognized as a very competitive candidate for reflector, moderator, and structural material for very high temperature reactor (VHTR). Since VHTR is operated up to $900-950^{\circ}C$, small amount of impurity may accelerate the oxidation and degradation of carbon graphite, which results in increased porosity and lowered fracture toughness. In this study, ultrasonic wave propagation properties were investigated for both as-received and degradated material, and the feasibility of ultrasonic testing (UT) was estimated based on the result of ultrasonic property measurements. The ultrasonic properties of carbon graphite were half, more than 5 times, and 1/3 for velocity, attenuation, and signal-to-noise (S/N) ratio respectively. Degradation reduces the ultrasonic velocity slightly by 100 m/s, however the attenuation is about 2 times of as-receive state. The results of probability of detection (POD) estimation based on S/N ratio for side-drilled-hole (SDHs) of which depths were less than 100 mm were merely affected by oxidation and degradation. This result suggests that UT would be reliable method for nondestructive testing of carbon graphite material of which thickness is not over 100 mm. In accordance with the result produced by commercial automated ultrasonic testing (AUT) system, human error of ultrasonic testing is barely expected for the material of which thickness is not over 80 mm.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.49-56
• /
• 1998

Seismic tomography has been widely used as high resolution subsurface imaging techniques in engineering applications. Although most of the techniques have been using travel time inversion, waveform method is being driven forward owing to the progress of computational environments. Although full-waveform inversion method has been known as the best method in terms of model resolving power without high-frequency restriction and weak scattering approximation, it has practical disadvantage that it is apt to get stuck in local minimum if the initial guess is far from the actual model and it consumes so much time to calculate. In this study, 2-D full-waveform inversion algorithm in acoustic medium is developed, which uses result of traveltime tomography as initial model. From the application on synthetic data, it is proved that this approach can efficiently reduce the problem of conventional approaches: our algorithm shows much faster convergence rate and improvement of model resolution. Result of application on physical modeling data also shows much improvement. It is expected that this algorithm can be applicable to real data.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2011

A multi-channel seismic reflection (MCS) survey was conducted in 2009 to explore the deep crustal structure of the Pacific Plate south of Hokkaido. The survey line happened to traverse a 250-km-wide Warm Core Ring (WCR), a current eddy that had been generated by the Kuroshio Extension. We attempted to use these MCS data to delineate the WCR fine structure. The survey line consists of two profiles: one with a shot interval of 200m and the other with a shot interval of 50 m. Records from the denser shot point line show much higher background noise than the records from the sparser shot point line. We identified the origin of this noise as acoustic reverberations between the sea surface, seafloor and subsurface discontinuities, from previous shots. Results showed that a prestack migration technique could enhance the signal buried in this background noise efficiently, if the sound speed information acquired from concurrent temperature measurements is available. The WCR is acoustically an assemblage of concave reflectors dipping inward, with steeper slopes (${\sim}2^{\circ}$) on th ocean side and gentler slopes (${\sim}1^{\circ}$) on the coastal side. Within the WCR, we recognised a 30-km-wide lens-shaped structure with reflectors on the perimeter.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1841-1844
• /
• 2009

일반 하천에서의 유량측정 방법은 하천 조건에 따라 다르다. 전통적인 방법으로는 구조물에 의한 방법, 유속계 측정에 의한 유속-면적법, 부자에 의한 방법, 그리고 희석법 등이 있다. 그러나 이러한 방법들은 측정 위험성을 가지고 있다. 홍수시 발생되는 고유속과 심한 난류, 거대한 부유물질들은 하천 접근에 어려움을 가져오고, 측정 기기의 파손 위험성뿐만 아니라 인명피해까지 발생시킬 가능성이 있다. 최근 기존 방법들의 문제점을 해결하기 위하여 음파, 초음파, 레이더 등을 이용한 유량 측정 방법과 장비들이 개발되었다. 본 연구에서 사용한 레이더 유속계는 하천의 표면유속을 측정하는 비접촉식 센서로 홍수기 전 미리 유속 측정 단면 측량을 실시한다면 홍수시에도 비교적 신속하고 안전하게 유속을 측정할 수 있다. 따라서 본 연구에서는 레이더 유속계를 충청북도 괴산군 달천에 위치한 수전교에 설치하여 괴산댐 방류량 및 동시유량 측정 성과와 비교하였다. 2007년 7월부터 2008년 8월까지 $36m^3/s\;\sim\;821m^3/s$의 사상에서 총 10회 측정한 결과, 레이더 유속계를 사용하여 측정한 유량의 상대오차는 댐방류량 대비 -3.3% $\sim$ 27.5%로 나타나 평균11.8%의 상대오차를 보였다. 레이더 유속계 측정과 동시에 실시한 유속-면적법 측정, ADCP법 측정의 상대오차는 각각 평균 5.7%, 6.5%로 나타난 것과 비교한다면 다소 높은 오차를 보였다. 그러나 측정 시간의 경우 수위에 따라 다소 차이는 있지만 레이더 유속계를 이용하면 30분 정도의 시간이 소요되었으며, 유속면적법은 1시간 이상, ADCP법은 40분의 시간이 소요되었다. 이와 같이 레이더 유속계는 다른 방법에 비해 정확성은 다소 떨어지지만 측정 속도와 안정성 면에서는 우수하다고 판단된다. 문제점으로 지적되는 정확도 측면의 경우 레이더 유속계로 측정되는 표면유 속과 평균 유속 사이의 보정계수 문제를 보완한다면 보다 정확한 측정이 가능할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2B
• /
• pp.169-175
• /
• 2008

The clear-water scour experiments were conducted to shed light on the unsteadiness of the horseshoe vortex around a bridge pier since the fluctuations of velocity components and unsteadiness of the horseshoe vortex can be considered as one of the main factors on local scour. The characteristics of the flow speed and turbulence around a bridge pier was examined using an Acoustic Doppler Velocimeter (ADV) and the flow visualization with kaolin clay particles upstream of a bridge pier. The outcomes of this study on the turbulence characteristics related with scour mechanism were presented with the quadrant analysis, the integral time scales, and the bed shear stresses before and after scouring, respectively. The bed shear stress before scouring was approximately quadruple times higher than that of the equilibriums state. It implies that the unsteadiness of the horseshoe vortex would play a significant role in the initial development of scour depth. Therefore, the bimodal distribution of flow velocity was identified as one of the mechanical properties of the horseshoe vortex and the unsteadiness of horseshoe vortex can be one of the major characteristics to understand the flow sturucture and local pier scour.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.104-117
• /
• 2004

Dmitri Donskoi, which went down during the Russo-Japanese War occurred 100 years ago, was found by using geophysical exploration techniques at the 400 m water depth of submarine valley off Jeodong of Ulleung Island. In the submarine area with the rugged seabed topography and volcanic seamounts, in particular, the reliable seabed images were acquired by using the mid-to-shallow Multibeam exploration technique The strength of corrosion (causticity) of the sunken Donskoi, measured by the electrochemical method, decreased to 2/5 compared with the original strength.