• Membrane Journal
• /
• v.20 no.4
• /
• pp.335-341
• /
• 2010

This study focuses on the investigation of the anion exchange membrane through blending poly(ethylenimine) (PEI) and poly(vinyl alcohol) (PVA) varying the mixing ratio. To characterize the resulting membranes, the water content, contact angle, FT-IR, thermal gravimetric analysis, ion exchange capacity, ion conductivity and elastic modulus were measured. The PVA / PEI = 90 / 10 membrane showed the ion conductivity, $5.16{\times}10^{-2}S/cm$ and simultaneously the contact angle, $78.3^{\circ}$. According to TGA measurement, the resulting membranes seemed durable at room temperature. Through the modulus test, the mechanical properties increased with increasing PVA content and apparently the membranes looked very robust.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.63-66
• /
• 2001

최근 섬유산업은 다품종, 소량 생산 체제 구축 및 quick response(QR) 개념 등의 도입을 통해 소비자의 다양화된 요구에 부응할 뿐 아니라 시장에서의 경쟁력을 강화해 가고 있다. 그 중 QR은 빠른 시간 내에 소비자가 원하는 다양한 제품을 저렴한 비용으로 공급하는 것을 목적으로 하고 있으나, 멜란지 제품의 경우 섬유 상태에서 최종 제품까지 거쳐야 할 공정이 많기 때문에 소비자의 요구에 신속히 대응하기가 쉽지 않다는 문제점이 있다. (중략)

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2003.10a
• /
• pp.227-231
• /
• 2003

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.332-335
• /
• 2011

원적외선, 음이온 방출과 항균, 탈취, 난연등의 효과를 가지는 황토를 합성수지와 혼합하여 복합소재를 연구하여 환경 친화적인 특징과 원적외선, 음이온의 방출을 이룰 수 있는 복합소재 조성을 연구하였다. PP는 MI가 2~60이고, TPE로 Ethylene계을 사용하였으며, 황토와 PP의 혼련을 도와주기 위하여 MA-g-PP를 첨가하였고, 활제, 분산제 및 산화방지제를 첨가하여 compounding 하였다. 또한 황토의 종류에따라 적황토, 호황토, 홍토, 백토, 흑토등으로 구분되고, 각각의 황토 마다 다양한 종류의 입도를 가지고 있으며, 또한 환경 친화적이며 난연성을 부여하기 위하여 다양한 조성으로 compounding 하였다, 황토의 종류에 따른 복합재료의 물성으로부터 기계적 특성치, 원적외선 방사율, 난연성등을 확인하고, 친환경 난연 복합소재 기술을 연구하였다. 적황토의 경우 황토의 함량이 많을수록 인장강도는 작아지는 경향을 나타냈으며, 입도가 작을수록 인장강도가 커지는 경향을 나타냈다. 파단신율의 경우 적황토(#2000)에서 가장 양호하게 나타났으며, 굴곡강도, 충격강도의 경우 적황토(#5000)에서 MI 의 경우 적황토(#325)에서 양호하게 나타났다.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.98-101
• /
• 1990

A new spectrophotometric determination method of scandium in the tin slag solution has been investigated using methyl thymol blue as a colorimetric reagent. Scandium is recovered by the anion exchange resin, Amberlite IRA 400, using the mixture solution of ammonium sulfate and sulfuric acid and an eluent. The mole ratio of complex of scandium and MTB at pH 6 is 1 to 1 and the wave length of the maximum absorbance is 585 nm and the molar absorptivity at this wave length is $2.0 {\times} 10^4\;\iota{\cdot}mol^{-1}{\cdot}cm^{-1}$. When tin slag solution is loaded into anion exchange resin and eluted, ions in the solution except scandium ion are eluted rapidly and scandium is eluted lately. So scandium is recovered easily.

• Journal of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.309-314
• /
• 1984

The species and equilibria of uranium and vanadium have been investigated in the various concentration of perchloric, hydrochloric and sulfuric acid by anion exchange chromatography. In the concentration range of $0.01\;{\sim}\;0.5M$ hydrochloric and $0.01\;{\sim}\;0.5M$ perchloric acid, uranium seems to be $UO_2^{2+}$species and in higher concentration than 0.5M hydrochloric acid $UO_2^{2+}$seems to form the chloride complex ion as $UO_2Cl^+$, $UO_2Cl_2$, $UO_2Cl_3^-$ and $UO_2Cl_4^{2-}$ according to the increase of the hydrochloric acid concentration. In the dilute(0.01N) sulfuric acid the adsorbability of uranium on anion exchange resin is strong and then decreases with increasing the sulfuric acid concentration. From this result we conclude that $UO_26{2+}$ formed the complex ion as $UO_2(SO_4)_2^{2-}$. In the perchloric acid of $0.01\;{\sim}\;0.5N$ concentration the existing equilibrium of vanadium and its constant calculated at $20^{\circ}C$ is $1.9{\times}108$ for $H_2V_{10}O_{28}^{4-}$ + $14H^+$ = $10VO_2^+ + 8H_2O$. The elution behaviors of vanadium in the hydrochloric and sulfuric acid are smiliar to those in perchloric acid.

• Membrane Journal
• /
• v.29 no.3
• /
• pp.173-182
• /
• 2019

Much research has been made for finding new and eco-friendly alternative sources of energy to solve the problems related with the pollution caused by emissions of greenhouse gases such as carbon dioxide as the use of fossil fuels increases worldwide. Among them, fuel cells draws particular interests as an eco-friendly energy generator because only water is obtained as a by-product. Anion exchange membrane-based alkaline fuel cell (AEMFC) that uses anion exchange membrane as an electrolyte is of increased interest recently because of its advantages in using low-cost metal catalyst unlike the PEMFC (potton exchange membrane fuel cell) due to the high-catalyst activity in alkaline conditions. The main properties required as an anion exchange membrane are high hydroxide conductivity and chemical stability at high pH. Recently we reported a chemically crosslinked poly(2-dimethyl-1,4-phenylene oxide) (PPO) by reacting PPO with N,N,N',N'-tetramethyl-1,6-hexanediamine as novel anion exchange membranes. In the current work, we further developed the same crosslinked polymer but having enhanced physicochemical properties, including higher conductivity, increased mechanical and dimensional stabilities by using the PPO with a higher molecular weight and also by increasing the crosslinking density. The obtained polymer membrane also showed a good cell performance.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.53-59
• /
• 1997

Chloride form anion exchange resin was used to separate one of the elements from the rare earth mixture using respectable Ln-EDTA eluent. $Sm^{3+}$, $La^{3+}$ or $Ce^{4+}$ complexed with EDTA was passed through the resin column and eluted with a Sm-EDTA solution as an eluent. Here all the rare earth element ions except $Sm^{3+}$ were passed. Adsorbed $Sm^{3+}$ in resin was eluted with 1.0 M HCl solution. If La-EDTA solution as an eluent was used to separate lanthanum ions, lanthanum ions were eluted together with other rare earth elements. When Ce-EDTA solution was also used for separation of $Ce^{4+}$, it was eluted in the region of other rare earth elements. In the case of Sm-EDTA elution, the elution mechanism was as follows : Absorption : $RCl+Ln-Y^-{\leftrightarrows}RLnY+Cl^-$, Sm-EDTA elution : $RLnY+Sm-Y^-{\leftrightarrows}RSmY+Ln-Y^-$, HCl elution : $RSmY+HCl{\leftrightarrows}RCl+Sm-Y^-$.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.273-277
• /
• 1998

The synthesis of hydroxy-terminated poly(propylene carbonate)(HTPPC) was performed by the reaction of propylene carbonate(PC) with alcohol initiator using metal alkoxides, crown ethers and quaternary onium salts as catalysts. The effects of catalyst structure, types and concentration of alcohol, and solvent were investigated. Among the alkoxide catalysts tested, the ones with higher Lewis acidity and with more nucleophilic alkoxide anion showed higher catalytic activity. Mixed catalysts of metal alkoxied and crown ether showed higher conversion of PC than metal alkoxide alone. Quaternary onium salts of bulky cation exhibited higher catalytic activity. High polar solvent showed higher yield of HTPPC and the yield increased with the decrease of [PC]/[Initiator] ratio.

• Industry Promotion Research
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2020

This study is a technology related to a lighting lamp that illuminates indoor or outdoor lighting with light. In more detail, a see-through window is created in all directions on a case constituting the exterior, and a jade stone processed in a thin panel form is attached to the see-through window. By constructing a lighting lamp, since the soft light is irradiated indoors or outdoors through the jade stone, it provides comfort and warmth to the user, enhances the indoor or outdoor interior effect, emits far-infrared rays and negative ions, and emits a subtle floral scent It is a technology for lighting lamps using jade stones that emit. The characteristics of the product of this research and development is that the viewing window is formed in all directions on the case constituting the exterior, and the lighting lamp is composed by attaching the processed jade stone in the form of a thin panel to the viewing window. It is meaningful that they studied lightings using jade stones that generate sounds such as Buddhist scriptures, the Bible, and Sijo.