• Microbiology and Biotechnology Letters
• /
• v.16 no.5
• /
• pp.335-342
• /
• 1988

An anion exchange chromatography was employed for the purification of mouse monoclonal antibodies from ascitic fluid and in vitro cultivation media. After cultivation of hybridomas, Alps 25-3, HCGK, A4W, and KW, producing IgG1, the culture supernatants were harvested by centrifugation, precipitated with 50-60％ ammonium sulfate, and dialyzed against 0.025 M Tris-HCI buffer (pH 8.2). Then the dialyzed samples were loaded into a DEAE-Trisacryl M anion exchange column. Monoclonal antibodies bound to the DEAE-Trisacryl M were eluted with 0.025 M Tris-HCI buffer (pH 8.2) containing 30-40 mM NaCl. In ammonium sulfate precipitation, the recovery of the monoclonal antibody was shown to be 90％ and 84％ from in vitro culture media containing 10％ and 2％ fetal bovine serum, respectively. On the other hand, the pretreatment by ultrafiltration enhanced the yield up to 91％ whereas the purity was lower than that by ammonium sulfate treatment. Subsequently, in the DEAE-Trisacryl M chromatographic separation, the purities and recoveries of all the monoclonal antibodies from both the in vitro culture supernatants and ascitic fluids were 70-80％ and 65％ respectively. The monoclonal antibody, Alps 25-3 could be further purified with a purity of 95％ through an immunoadsorbent chromatography.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.341-346
• /
• 1996

Electrochemical determination of iodide was carried out by stripping voltammetry with a $(Cin)Cu(NO_3)_2$ modified-carbon paste electrode. Iodide was coordinated onto the electrode surface containing $(Cin)Cu(NO_3)_2$ via ion exchange. The oxidation peak potential of incorporated iodide was ＋0.72 V. The optimum analytical conditions for the determination of iodide were investigated using linear sweep voltammetry. Optimum conditions for the electrochemical determination of iodide were as follows: i) A predeposition solution was 0.1 M $KNO_3.$ ii) The deposition time was 10 min. iii) The composition of the electrode was 40% (w/w). The detection limit for iodide was $1.0{\times}10^{-6}M$ and the relative standard deviation was ${\pm}5.5%\;in\;2.0{\times}10^{-5}M$(four repetitions). The interference effect of other anions were also investigated. $Cl^-,\;Br^-,\;C_2O_4^{2-},\;and\;ClO_4^-$ ions do not interfere for the determination of iodide. When $SCN^-$ was added to the deposition solution, the oxidation peak current of iodide ion was decreased roughly 32%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.97-100
• /
• 1992

The optimum condition for the extraction of antimicrobial substance from Lithospermi radix was investigated. For the purpose of obtaining basic data for the development of natural preservatives and for the prevention of food poisoning accidents, its antimicrobial activity was tested against several kinds of saprophytic microbes and food poisoning bacteria. The optimum condition for extraction of antimicrobial substance was to steep Lithospermi radix into 95% ethanol for 24 hours at room temperature. Antimicrobial activity was observed at the pH range $5.0{\sim}8.0$, but its activity became stronger at acidic condition. The result of ion exchange chromatography was showed that the antimicrobial activity of anionic portion was more apparent than that of cationic portion. The antimicrobial activity against Gram positive bacteria was stronger than that of Gram negative bacteria and the growth of food poisoning bacteria such as S. aureus and V. parahaemolyticus was inhibited in the concentration of 0.1% for 48 hours. As for mold and yeast, the growth of some kinds of these organisms was inhibited in the concentration of 0.1 % for 48 hours and the growth of nearly all the fungi was inhibited in the concentration of 0.15% for 96 hours.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.625-633
• /
• 2007

We isolated a new extracellular alginate lyase-producing microorganism, which displayed alginate-depolymerizing activity in plate assays, from coastal soils in Wando, Jeollanam-do, Korea. This alginate-depolymerizing bacterium belonged to the genus Streptomyces and it was named Streptomyces sp. MET 0515. An extracellular alginate lyase(ALY1) secreted by Streptomyces sp. MET 0515, was purified to homogeneity by a combination of acetone precipitation, anion-exchange chromatography (Q-Sepharose and DEAE-Sepharose) and Sephacryl S-200 HR gel filtration chromatography. Its molecular mass was 26 kDa as determined by SDS-PACE analysis. The enzyme had an optimal temperature of $70^{\circ}C$ for its activity, and was most active at pH 7.5. The thermal and pH stability were $0-50^{\circ}C$, and pH 6.0-9.0, respectively. The enzyme activity was stimulated by 1mM $Mn^{2+}$, and inhibited by 1mM $Fe^{3+}$, 1mM EDTA and 1mM $Zn^{2+}$. Preliminary analysis of substrate specificity showed that this alginate lyase had activity on both poly-alpha 1,4-L-guluronate and poly-beta 1,4-D-mannuronate in the alginate molecule.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.385-389
• /
• 2002

Analytical method for diethylstibestrol (DES) and zeranol, which are growth promoters, in muscle foods was studied. Through selected ion monitoring analysis by GC-MSD for hormones, $M^+$ 412, 420, 416, and 433 for DES, $D_8DES$, ${\beta}-estradiol$, and zeranol, respectively, were selected for quantitative analysis. Removal of interferences in meat was done by passing the meat through 1 cc of strong anion exchanges resin, Dowex $2{\times}8$, 400 mesh, whereby the recoveries of DES and zeranol were achieved. Recoveries of DES and zeranol were ranged from 85 to 110%, and 75 to 110%, respectively, in meat using $D_8DES$ as an internal standard, while were 82 to 105%, and 65 to 120%, respectively, using ${\beta}-estradiol$ as an internal standard. These results show that both $D_8DES$ and ${\beta}-estradiol$ can be adopted as the internal standard for the analysis of DES and zeranol in muscle foods. Limits of detection of DES and zeranol were 0.05 and 1.0 ng/g, and limits of quantitation were 0.5 and 1.0 ng/g, respectively. The results of this study revealed no DES and zeranol were present in 14 samples of beefs, porks, ducks, chickens, mutiplicated flat fish, and trout.

• Journal of Life Science
• /
• v.29 no.11
• /
• pp.1294-1303
• /
• 2019

Perchlorate is an anionic pollutant that is very soluble and stable in water. It has been detected not only in soil/ground water but also in surface water, drinking water, food, fish, and crops. Perchlorate inhibits iodine uptake by the thyroid gland and reduces production of thyroid hormones that are primarily responsible for regulation of metabolism. Although various technologies have been developed to remove perchlorate from the environment, biodegradation is the method of choice since it is economical and environmentally friendly. However there is limited information on perchlorate biodegradation in salt environment such as salt water. Therefore this paper reviews biodegradation of perchlorate in salt water and related microorganisms. Most biodegradation research has employed heterotrophic perchlorate removal using organic compounds such as acetate as electron donors. Biodegradation research has focused on perchlorate removal from spent brine generated by ion exchange technology that is primarily employed to clean up perchlorate-contaminated ground water. Continuous removal of perchlorate at up to 10% NaCl was shown when bioreactors were inoculated with enriched salt-tolerant perchlorate-reducing bacteria. However the reactors did not show long-term stable removal of perchlorate. Microorganisms belonging to ${\beta}$- and ${\gamma}$-Proteobacteria were dominant in bioreactors used to remove perchlorate from salt water. This review will help our understanding of perchlorate removal from salt water to develop a decent biotechnology for the process.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.221-229
• /
• 2023

This research aimed to conduct an empirical assessment of the penetration of chloride and sulfate ions into mortar sections using an anion exchange membrane(AEM) and laser-induced breakdown spectroscopy(LIBS). The study involved a simultaneous ion chromatography(IC) analysis and LIBS analysis performed on mortars immersed in varying concentrations of chloride and sulfate. The findings revealed that at the wavelengths specific to Chloride(837.59nm) and Sulfur(921.30nm), the LIBS intensity achieved using AEM surpassed that obtained with a paper substrate at equivalent penetration concentrations. A robust correlation was confirmed between LIBS intensity and chloride ion concentration. Furthermore, when juxtaposed with IC analysis concentration outcomes at identical depths, the AEM displayed a higher intensity. The research noted an enhancement in LIBS intensity and a diminution in errors within the low-concentration section when deploying AEM. However, for the Sulfur wavelength of 921.3nm, there remains a need to augment the sensitivity of the LIBS signal within the low-concentration section in future studies. The findings underscore the potential of employing AEM and LIBS for precise analysis of chloride and sulfate ion penetration into mortar sections. This strategy can aid in bolstering assessment precision and mitigating errors, particularly in regions with low concentrations. It is recommended to further research and develop methods to amplify the sensitivity of the LIBS signal for sulfur detection in low-concentration sections. In sum, the study accentuates the significance of employing advanced techniques like AEM and LIBS for efficacious and precise analysis in the domain of mortar section assessment.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.412-419
• /
• 2023

Anion exchange membrane electrolysis is considered a promising next-generation hydrogen production technology that can produce low-cost, clean hydrogen. However, anion exchange membrane electrolysis technology is in its early stages of development and requires intensive research on electrodes, which are a key component of the catalyst-system interface. In this study, we optimized the pressure conditions of the hot-pressing process to manufacture cobalt oxide electrodes for the development of a high uniformity and high adhesion electrode production process for the oxygen evolution reaction. As the pressure increased, the reduction of pores within the electrode and increased densification of catalytic particles led to the formation of a uniform electrode surface. The cobalt oxide electrode optimized for pressure conditions exhibited improved catalytic activity and durability. The optimized electrode was used as the anode in an AEMWE single cell, exhibiting a current density of 1.53 A cm^-2 at a cell voltage of 1.85 V. In a durability test conducted for 100 h at a constant current density of 500 mA cm^-2, it demonstrated excellent durability with a low degradation rate of 15.9 mV kh^-1, maintaining 99% of its initial performance.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2009

The adsorption of iodide on untreated bentonite and bentonites modified with organic cation (i.e., hexadecylpyridinium chloride monohydrate ($HDP^+$)) was investigated, and the organobentonites were characterized using uptake measurements, ${\mu}$-XRD, and electrophoretic mobilities measurement. Uptake measurements indicate that bentonite has a high affinity for $HDP^+$. Our ${\mu}$-XRD study indicates that organobentonites significantly expanded in basal spacing and organic cations were substantially intercalated into the interlayer spaces of bentonite. The electrophoretic mobility indicates that organobentonite tht is modified with organic cations in excess of the CEC of bentonite is completely different from untreated bentonite in the surface charge distribution. We found significant differences in adsorption capacities of iodide depending on the bentonite properties as follows: iodide adsorption capacities were 439 mmol/kg for the bentonite modified with $HDP^+$ at an equivalent amount corresponding to 200% of the CEC of bentonite whereas no adsorption of iodide was observed for the untreated bentonite. The molecular environments of iodine adsorbed on organobentonites were further studied using I K-edge and $L_{III}$-edge x-ray absorption spectroscopy (XAS). The X-ray absorption near-edge structure (XANES) of iodine spectra from organobentonites was similar to that of KI reference solution. Linear combination fitting of EXAFS data suggests the fraction of iodine reacted with the organic compound increased with increasing loading of the organic compound on organobentonites. In this study, we observed significant differences in the adsorption environments of iodide depending on the modified property of bentonite and suggest that an organobentonite has potential as reactive barrier material around a nuclear waste repository containing anionic radioactive iodide.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.207-219
• /
• 2005

The physical and chemical characteristics of soils in a small watershed were investigated and the effect of geology and land use on soil quality were examined by using multivariate statistical methods, principal components analysis and discriminant analysis. The soil developed from andesite had finer texture and higher contents of water extractable inorganic components, clay, and mafic minerals than the soil developed from granite. It is considered that the accumulation of salts in the farmland soils indicated by electrical conductivity, contents of cations and anions and pH was caused by fertilizer input during cultivation. The low contents of organic matter in the farmland soils was due to the enhanced oxidation of organic matter by tillage and by the harvest of crops. The contents of inorganic components are increased as following order: upland > orchard > paddy field > forest. The high contents of water soluble $SO_4\;^{2-}$ of paddy soils is due to the oxidation of sulfides mineral formed during the flooding period during the air-dry and extraction. The results of principal components analysis show the difference of soil quality was controlled by geology and land use. PCI indicate the input of fertilizer, mineral weathering and ion exchange reaction by application of nitrogenous fertilizers. The results of two discriminant analyses using water extractable inorganic components and their ratios by land use were also clearly classified by discriminant function 1 and 2. In discriminant analysis by components, discriminant function 1 indicated the effect of fertilizer application and increased as following order: upland > orchard > paddy field > forest soil. The investigated and predicted data for land use from discriminant analysis showed similar results. The discriminant analysis can be used as a useful method certifying the change of land use.