• Resources Recycling
• /
• v.32 no.6
• /
• pp.25-33
• /
• 2023

With the growth of the battery industry, a rapid increase in the production and usage of lithium-ion batteries is expected, and in line with this, much interest and effort is being paid to recycle waste batteries, including production scrap. Although much effort has been made to recycle cathode material, much attention has begun to recycle anode material to secure the supply chain of critical minerals and improve recycling rates. The proximate analysis that measures the content of coal can be used to analyze graphite in anode material, but it cannot accurately analyze due to the interaction between the components of the black mass. Therefore, in this study, thermogravimetric analysis of each component of black mass was measured as the temperature increased up to 950℃ in an oxygen atmosphere. As a result, in the case of cathode material, no change in mass was measured other than a mass reduction of about 5% due to oxidation of the binder and conductive material. In the case of anode material, except for a mass reduction of about 2% due to the binder, all mass reduction were due to the graphite(fixed carbon). In addition, metal conductors (Al, Cu) were oxidized and their mass increased as the temperature increased. Thermal analysis results of mixed samples of cathode/anode show similar results to the predictive values that can be calculated through each cathode and anode analysis results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06a
• /
• pp.40-41
• /
• 1994

본 연구에서는 윤활유에 해수가 혼입된 유화유중에서 음극방식에 의한 선박용 베어링 합금재의 침식-부식억제에 관한 연구를 위하여, 초음파 진동장치의 캐비네이션 발생장치에 의해 선박용 베어링 합금재의 캐비네이션 침식-부식방지를 위해 음극방식(Cathodic protection)실험을 실시하였다. 이실험을 토대로 하여 해수의 혼입에 따른 유화유중에서 음극방식에 의한 베어링 합금재의 침식-부식억제효과를 구명하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.130-130
• /
• 2012

리튬이차전지의 음극재로 적용하기 위해, 텅스텐 산화물을 구리 기재 위에 전해 도금하였다. 이를 위해 텅스텐 산화물 염이 포함된 도금 조 내에서 다양한 도금 조건을 사용하여 산화물을 구리 기재 위에 박막 형태로 형성시켰다. 형성된 박막 산화물의 조성 및 구조적 특성을 분석하였고, 특히, 리튬 염을 포함하는 유기 용매 하에서 순환 전위 실험을 수행하여, 텅스텐 산화물 전해 도금 박막이 리튬이차전지의 음극재로서 리튬과 가역적으로 반응하는지 분석하였다.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.331-336
• /
• 2019

In this study, required properties and optimized procedure conditions for the pitch based soft carbon anode of lithium ion battery was investigated for improving the initial efficiency and rate performance. Each petroleum residue was thermally treated at 360, 370, and $410^{\circ}C$ for 3 hours to synthesis a pitch and the corresponding pitch shows the softening point of 86, 98, and $152^{\circ}C$, respectively. The elemental analysis and thermal characteristics of the pitch were investigated by EA analysis and TGA. It was noted that the low H/C and improved thermal stability were obtained with the high softening point. The obtained pitch was carbonized at $1,200^{\circ}C$ for 1 hour to produce a soft carbon based anode. As a result of investigating the crystal structure by XRD analysis, it was found that the crystallinity of soft carbon increased with increasing the softening point. It was considered that relatively higher boiling components and decreases in the evaporation component resulted the components participation for cyclization during the heat treatment process. The soft carbon based anode with an improved crystallinity shows the enhanced initial efficiency and rate performance. The mechanism of both improvements was also discusssed based on the developed crystal structure of soft carbon based anode materials.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.237-238
• /
• 2016

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.83-90
• /
• 2021

In this study, effects of the physical and chemical properties of low temperature heated carbon on electrochemical behavior as a secondary battery anode material were investigated. A heat treatment at 600 ℃ was performed for coking of petroleum based pitch, and the manufactured coke was heat treated with different heat temperatures at 700~1,500 ℃ to prepare low temperature heated anode materials. The physical and chemical properties of carbon anode materials were studied through nitrogen adsorption and desorption, X-ray diffraction (XRD), Raman spectroscopy, elemental analysis. Also the anode properties of low temperature heated carbon were considered through electrochemical properties such as capacity, initial Coulomb efficiency (ICE), rate capability, and cycle performance. The crystal structure of low temperature (≤ 1500 ℃) heated carbon was improved by increasing the crystal size and true density, while the specific surface area decreased. Electrochemical properties of the anode material were changed with respect to the physical and chemical properties of low temperature heated carbon. The capacity and cycle performance were most affected by H/C atomic ratio. Also, the ICE was influenced by the specific surface area, whereas the rate performance was most affected by true density.

• Clean Technology
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2020

Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.146-146
• /
• 2017

산화비스무트는 리튬이온과의 반응에서 현재 상용화된 그래파이트보다 높은 이론용량을 가지고 있으나, 리튬이온과의 반응에서 비교적 큰 부피팽창 특성을 가져 리튬이차전지의 음극재로서 상용화가 어려운 단점이 있다. 본 연구에서는, 이러한 문제점을 개선하기 위하여 양극산화법을 통해 충 방전시 부피팽창 변화가 매우 적은 타이타니아 나노튜브를 제조한 후, 그 위에 스프레이 방법으로 산화비스무트를 코팅하여 두 물질의 복함체를 만듦으로써 용량과 구조적 안정성을 향상시키는 방법을 소개한다. 음극재의 구조적 특성은 고분해능 주사전자현미경 (HR-SEM), 고분해능 엑스선 회절분석기(XRD)를 통해 조사하였으며, 전기화학 임피던스 분광법 (EIS), 순환전류법 (CV), 충 방전 싸이클 분석을 통해 리튬이차전지의 작동원리와 보다 향상된 성능을 규명하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.71-71
• /
• 2018

현재 상용화된 Graphite 음극활물질의 경우 낮은 부피당, 무게당 용량을 가지며 이는 다양한 분야에 활용하는데 제약이 있다. $SiO_2$는 Si에 비해서는 낮은 용량이지만 metal oxide 계열 중 가장 높은 이론용량을 가지고 있으며, 리튬 이온과 반응 시 큰 부피팽창을 하며, 절연체로 전기전도도가 낮아 리튬이 차전지의 음극재로 상용화가 어려운 단점이 있다. 본 연구에서는 TEOS를 이용하여 탄소와 $SiO_2$를 동시에 $TiO_2$ microcone 구조에 코팅하여 3가지 물질의 복합체를 형성하여 용량을 증대시키고 구조적 안전성을 향상시키는 방법을 소개 한다. 음극재의 특성은 고분해능 주사전자현미경 (HR-SEM), 고분해능 엑스선 회절분석기 (XRD), 를 통해 조사하였으며, 순환전류법 (CV), 충 방전 싸이클 분석을 통해 리튬이차전지의 작동원리와 보다 향상된 성능을 규명하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.45-46
• /
• 2015