• Korean journal of applied entomology
• /
• v.26 no.4 s.73
• /
• pp.251-255
• /
• 1987

This study was conducted to investigate the effects of cultural methods on infection by Rhizoctonia disease(Rhizoctonia solani $K\"{u}hn$) of potato (Solanum tuberosum L.). Two potato cultivars, i.e., Irish Cobbler and Superior were planted in 1984 at the Alpine Experiment Station and 4 cultural methods were used in Combinations or separately. The deeper planting showed the later germination of sprout. The degree of infection on underground stems didn't show any differences between the treatments, but the yield was higher in deeper planting. When seed tubers were planted on April 28 the underground stems showed severely discolourated epidermis comparing to later planting, consequently the yield was low. The glazed chitting tubers produced healthy sprouts comparing to the untreated tubers, consequently the yield was also increased. The density of sclerotia on tuber skin was remarkably increased between 6 to 15days of delayed digging after haulm killing. Underground stems of Irish Cobbler were easily discolourated by the disease, where-as the density of sclerotia was higher on tuberskin of Superior than of Irish Cobbler.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.275-281
• /
• 2020

Purpose: Development of a latent antimicrobial soft liner is strongly needed to overcome a possible inflammation related with its dimensional degrade or surface roughness. Modified tissue conditioner (TC) containing chitosan-doped silver nanoparticles (ChSN) complexes were synthesized and assessed for their characterizations. Materials and methods: ChSN were preliminarily synthesized from silver nitrate (AgNO₃), sodium borohydride (NaBH₄) as a reducing agent and chitosan biopolymer as a capping agent. Ultraviolet-visible and Fourier transform infrared spectroscopy were conducted to confirm the stable reduction of nanoparticles with chitosan. Modified TC blended with ChSN by 0 (control), 1.0, 3.0 and 5.0 % mass fraction were mechanically tested by ultimate tensile strength (UTS), silver ion elution and color stability (n=7). Results: At 24 hour and 7 day storage periods, UTS values were not significant (P>.05) as compared with pristine TC (control) and silver ion was detected with the dose-dependent values of ChSN incorporated. Color stability of TC were influenced by ChSN add, with the higher doses, the significantly greater color changes (P<.05). Conclusion: A stable synthesized ChSN was acquired and modified TC loading ChSN was characterized as silver ion releasing without detrimental physical property. For its clinical application, antimicrobial test, color control and multifactor investigations are still required.

• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.1-10
• /
• 1982

For the purpose of establishment of Reference Korean and estimation of internal and external exposure doses in the Reference Korean, we have surveyed reference values for Koreans, such as physical standards including height, weight and body surface area, food consumption rate of daily intake of radioactive substances and exposure dose from natural radiation. The results obtained are as follows: 1) The age group of the Reference Korean ranged from 20 to 30 years old in both sexes. The height, weight and surface area of the body of the Reference Korean are 167cm, 61kg and $1.67m^2$ in male and 155cm, 51kg and $1.51m^2$, respectively in female. 2) The food consumption of the Korean is 812.8g (669.6g of vegetable food and 143.2g of animal food) per capita per day. 3) Koreans are taken about 1,200 pCi of radioactive substances(${\beta}$-ray) per capita per day. 4) The external and internal radiation exposure doses of the Korean are estimated to be 127 mrem and 8 mrem per year, respectively. However, it is believed that these values will be modified upon the addition of data collection.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.387-393
• /
• 2008

Using a first-principles total-energy method, we investigate structural and energy changes on Ag/Si(111)$\sqrt{3}{\times}\sqrt{3}$($\sqrt{3}-Ag$ hereafter) as the number of the additional Ag adatoms increases. The Ag coverage varies from 0.02 to 0.14 ML. Most Ag adatoms occupy the ST site, which is the center of small triangles of the substrate Ag layer that is composed of small and large triangles. One of the interesting adsorption features is that the adatoms immerse below the substrate layer. The total energy calculations show that the clusters become the most stable when the number of Ag atoms is three. This three-Ag cluster becomes the building block of the $\sqrt{21}{\times}\sqrt{21}$ phase that shows a large surface conductivity. The simulated STM images show that the adatoms look dark in filled-state images while bright in empty-state images. This suggests that the adatoms donate their charge to the substrate. The simulated STM images agree well with the experimental images.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.618-624
• /
• 2013

We demonstrated unique inter- and intra-plasmonic coupling effects in bimetallic Au@Ag core-shell NP arrays which are regularly or randomly arranged on self-assembled block copolymer (BCP) inverse micelle monolayers. Polyvinylpyrrolidone (PVP)-stabilized Au@Ag core-shell NP arrays in regular or disordered configuration were incorporated and assembled on reconstructed PS-b-P4VP inverse micelle templates through two types of processes. The intensively enhanced LSPR coupling properties of individual and assembled Au@Ag NPs were evaluated by UV-visible spectroscopy in terms of the type of ligand stabilizer, coupling between Au and Ag, thickness of Ag shell, and type of array configuration. Finally, Au@Ag core-shell NP arrays were employed as active substrates for surface enhanced Raman spectroscopy (SERS) and a significantly enhanced signal enhancement was observed in accordance with the coupling intensity of Au@Ag NPs patterns.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.146-159
• /
• 1984

This study was the contrast of the compressive strength, the tensile strength, the reducing ratio and the flow of mortar using dispersing agent and high fluid admix. 1. The admix ratio of chemical admixtures espressing maximum strength appeared the same result high fluid admix SP was 0.6%, the dispersing agents LG and C211 were 0.2%, SK was 0.3%, C376 was 0.5%. But two or three times more than standard quantity made the strength's fast lowness, which influenced bad to wateriness and retard the soli-dification. 2. When proper quantity of chemical admixture was used, the increment of compressive strength was as follows. High fluid admix SP was 40.7% and the average increasing rate of dispersing agents(C211 was 19.5%, LG was 19.1%, C376 was 17.9%) was 18.7% more than normal mortar in the codition of 7 days. Also, in the condition of 28 days, high fluid admix SP was about 24.4% and the average of dispersing agents(LG was 21.1%, C211 was 16.4%, SK was 11.1%, C376 was 7.6%) was 14.1%. 3. When proper quantity of chemical admixture was used, the increment of tensile strength was as follows. High fluid admixture SP was 26.6% and the average increasing agents(SK was 16.0%, C376 was 14.7%, LG was 10%, C211 was 5.8%) was 11.6%. Also, in the condition of 28 days, high fluid admix SP was 16.5% and the average increasing rate of dispersing agents(LG was 19.1%, SK was 10.6%, C211 was 10.1%, C376 was 8.7%) was 12.1%. 4. As for the reducing ratio of each dispersing agent, he flow of mortar was less than the slump of concrete. That is; the reducing ratio of concrete was 15% adding each dispersing agent, but the reducing ratio of mortar was in the range of from 5.8% to 13.5% in 1 : 1 mixture, from 7.6% to 14.2% in 1 : 2, from 9.5% to 18.8% in 1 : 3. 5. The fluidity of each chemical admixture was as follows. High fluid admix SP in the condition of 1: 1 and 1 : 2 showed the best result than other dispersing agent and 1 : 3 showed the same result like other agents. Therefore these good dispersing agents were suitable in the prepact concrete construction using intrusion mortar.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.1-6
• /
• 1998

의복은 사람의 신체적인 특징에잘 맞고 심리적으로 만족을 주는 것이어야 한다. 식죽(1989)은 인간관계와 사회구조가 복잡하게 서로 얽혀 이루어진 현대사회에서는 의복에대한 욕구는 다면적이고 모든 기능을 동시에갖는 것이 요구되어진다고 하였고 정삼호(1988)는 성인여성들은 연려이 증가함에 따라 나타나는 체형변화를 의복으로 최대한 보완할 수 있는 디자인을 선택하여 다른 사람들에게 의복을 통해 자기 자신을 표현함으로서 심리적으로 안정감을 얻으려고 노력한다고 하였다. 따라서, 의복 착용 자가 의복을 통해얻는 심리적 만족도는 신체적 만족도와 관련되어 형성된다고 할 수 있으며 또한 신체 적 만족도는 체형과 관련되어 형성된다고 할 수 있다 (정재은,1992). 이에 신체적 만족도와 의복행동 및 체형에 관한 연구가 많이 이루어지고 있다. 이옥연(1984), 식죽(1988), Labat-Delong(1990), 김용숙 (1990), Shim(1991), 구자명.이명희(1994), 고애란.김양진(1996) 등은 신체 만족도와 의복행동간에 관련 이 있음을 밝혔으며, 임숙자(1986), 김양진.강혜원(1992)은 신체의 결함을 의복으로 보완하고자 하는 경향이 있다고 하였고, 김정숙(1984)은 자신에게 어울리는 의복을 선택하므로써 안정감을 갖게된다고 하였다. 또한, Douty. Brannon(1984)은 여성은 마른것을 선호한다고 하였고 Clayton 등(1987)은 의복 착용자의 체형에 따라 의복 유행성 지각이 다름을 밝혔다. 그러나, 이에관한 대부분의 연구들은 심리 학적 입장에서 행하여진 연구로 신체의 종합적인 만족도, 선호를 취급하고 있을 뿐 신체각 부위의 만족 도나 선호에 관한 자세한 고찰을 하고 있지 않으며 자신의 신체에 대한 인식도 및 실제체형과의 비교는 이루어지고 있지 않다. 이에, 신체 각 부위에 대한 인식도 및 실제 신체 측정치와 만족도와의 관계 및 이상형에 대해 구체적으로 파악할 필요가 있다. 또한, 신체에 대한 이상형은 시대의 여러 여건에 따라서 변화할 수 있으므로 의복 착용자가 의복을 통해서 표현하고자 하는 이상형의 시대적 변화를 살펴볼 필요가 있다. 따라서 본 연구에서는 신체에 대한 인식도 및 만족도, 이상형에 대한 설문지 조사와 신체측정을 통하여 신체 크기에대한 만족도를 객관적인 척도로 고찰하고, 이상형과 실제 체형에 관하여 고찰하고자 한다. 도한, 1992년도 자료와의 비교를 통하여 시대에 따른 신체만족도와 이상형의 변화를 파악하고자 한다. 이를 기초로 한 의복원형 제작 및 의복 디자인에 대한 연구를 통해 의복의 맞음새가 좋을뿐만 아니라 의복착용자들 에게 심리적 만족을 줄 수 있는 의복 제작에 도움이 될 수 있을 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.346.1-346.1
• /
• 2016

본 연구에서는 열처리(Thermal Dewetting Process)와 빗각 증착(Oblique angle deposition)을 이용하여 비주기 서브파장 구조물을 마이크로 렌즈 형태의 유리 기판 상부에 제작하였다. 먼저 $2{\times}2cm2$ 크기의 유리 기판에 기존 리소그래피 공정으로 원기둥 형태의 감광액을 형성한다. 이후 Hot-plate로 $180^{\circ}C$에서 90초간 열을 가해 지름이 $20{\mu}m$인 반구형태로 변형시킨 뒤 반응성이온식각 공정을 진행하여 마이크로 렌즈를 제작한다. 렌즈의 표면에 나방 눈 구조를 형성하기 위해 전자빔 증착으로 15nm의 은 박막을 쌓은 뒤 $500^{\circ}C$에서 1분간 열처리 공정을 진행하였다. 열이 가해졌을 때 은 박막은 표면자유에너지를 최소화하기 위해 나노 크기의 덩어리진 입자 형태로 변화한다. 여기서 형성되는 나노입자의 크기가 렌즈 표면 중심에서 가장자리로 갈수록 작아진다는 것을 주사전자현미경을 통해 확인하였다. 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기가 점점 작아진다는 것을 검증하기 위해 은 박막의 증착 각도를 $0^{\circ}$, $35^{\circ}$, $55^{\circ}$, $70^{\circ}$로 증착 후 열처리 공정을 진행하여 확인하였다. 비스듬하게 증착되어 형성된 박막은 다공형태로 낮은 밀도를 가지는데 이는 박막 두께 감소를 일으킨다. 따라서 증착 각도가 증가할수록 열처리 공정 후의 은 나노입자의 크기는 점점 작아진다. 이후 은 나노입자를 마스크로 하여 다시 반응성이온식각 공정을 진행하였으며 식각 후 나머지 은 나노입자들은 HNO3용액에서 1분간 처리하여 제거하였다. 제작된 구조물의 평균 직경과 크기는 각각 ~220nm 및 ~250nm인 것으로 확인하였다. 위와 같은 공정을 통해 다양한 크기를 가진 비주기 서브파장 구조물을 제작할 수 있다. 구조물의 주기가 파장 길이보다 짧을 경우 분산이 최소화되며 넓은 파장 대역에서 무반사 효과를 얻을 수 있다. 이 공정은 마스크를 통한 리소그래피의 한계를 극복할 수 있으며 여러 곡면형 표면에 적용가능한 장점이 있다. 또한 프리즘, 렌즈, 광섬유와 같은 광소자의 광투과율을 향상시키는데 이용될 수 있다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.3
• /
• pp.53-56
• /
• 1982

To study nutritional values of snake head and carp cooking, the content of minerals and amino acid including general components were analyzed. Crude fat in snake head and carp were 3.4%,2.8% respectively and crude protein 1.7%, 2.9%. Calcium in snake head and carp were 127.1mg%. 16.6mg% and iron were 5.6mg%. 5.2mg% respectively. The amino acid composition of snake head and carp showed high content of glycine, glutamic acid, proline and alanine while the content of phenylalanine, valine, histidine, isoleucine, methionine and tyrosine were relatively low. Total amino acid of carp showed higher than that of snake head.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.23-31
• /
• 1968

We have obtained the following results, at the production of cellulase of Chaetomium globosum and its properties of crude enzyme. 1. At the production of enzyme, wheat bran solid culture was more active than surface or shaking culture. 2. The production of enzyme was maximum between the eighth and the tenth days, but slightly decreased thereafter. 3. The optimum condition of the reactions in saccharification with CMC were obtained the following results. 1) The optimum pH was within the range of from 4.0 to 5.0 and stable pH range was within 3.5 to 6.5. 2) The optimum temperature was $40^{\circ}C$ and thermal stability was below $50^{\circ}C$ and completely inactivated at $70^{\circ}C$ 4 Dialyzed crude enzyme was activated by $Mn^{++}\;Mg^{++}\;Fe^{++}\;and\;Mo^{++}\;respectively\;but\;Hg^{++}$ was inhibited its enzyme action.