• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.52-53
• /
• 1995

전해질용액에 있는 이온교환막을 통해 전류가 흐를 때 막표면에는 경계층이 형성된다. 희석실쪽 막표면에서 전해질의 농도는 감소하고 농축실쪽에서 증가 하는 농도분극현상이 일어난다. 이와 같은 농도분극현상은 전류밀도에 벼놔를 주어 에너지 소비를 증가시키고 막표면에 스케일을 형성할 수도 있다. ED에서는 농축실보다는 희석실쪽의 농도분극현상이 더 많은 관심을 갖게 되며 이 부분 연구가 활발하게 진행된다. 따라서 전기 투석을 이용한 물질분리는 항상 한계전류밀도이하에서 이루어져야 하는데 i$_{lim)$은 막자체의 성능 외에도 용액의 종류및 농도, 온도, pH, 전압등에 의해 변화한다. 따라서 i$_{lim)$이 각 변수에 의해 얼마만큼 변화하는지를 살펴봄으로써 임의의 환경에서 i$_{lim)$을 추정할 수 있는 모델을 제시하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.452-458
• /
• 1989

The crystal structures of vacuum-dehydrated $Ag^+\;and\;Ca^{2+}$ exchanged zeolite A, Ag_7Ca_{2.5}-A(a = 12.310(1){\AA})$ and $Ag_2Ca_5-A(a = 12.287(2){\AA})$ have been determined by single-crystal X-ray diffraction methods in the cubic space group Pm3m at $21(1)^{\circ}C$. The crystals of $A_7Ca_{2.5}-A\;and\;Ag_2Ca_5-A$ were prepared by flow method using exchange solutions in which mole ratios of $AgNO_3\;and\;Ca(NO_3)_2$ were 1:50 and 1:1000, respectively, with total concentration of 0.05 M. Full-matrix least-squares refinement converged to the final error indices of R1 = 0.056 and R2 = 0.059 for $Ag7Ca2.5-A$, and R1 = 0.054 and R2 = 0.082 for $Ag2Ca5-A$ using 306 and 348 reflections, respectively, for which I >3 {\sigma}$ (I). 5.5 $Ag^+$ ions and 2.5 Ca^{2+}$ ions for $Ag_7Ca_{2.5}-A\;and\;2\;Ag^+$ ions and 5 $Ca^{2+}$ ions for $Ag_2Ca_5-A$ lie on two crystallographically nonequivalent threefold axes on the 6-rings. Both structures indicate that smaller Ca2+ ions preferentially occupy 6-ring sites and larger $Ag+$ ions occupy 8-ring sites when total number of cations per unit cell is more than 8.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.58-64
• /
• 2000

The photocatalytic removal of Ag(I) in water by $TiO_2$ at a various conditions, which are initial Ag(I) concentration, circulation flow rate, $TiO_2$ dosage and methanol concentration, was studied. A continuous flow system with a circular type reactor of the TiO2 suspensions with UV light through an photoreactor column was applied. The major results of this study were as follows; 1. First order kinetics was observed from the result at different initial concentration of Ag(I). As the initial Ag(I) concentration was incereased, the reaction rate was decreased. 2. The removal efficiency of Ag(I) increased with increasing the circulation flow rate and $TiO_2$ dosage. However, over $4{\ell}/min$ of circulation flow rate and $1.5g/{\ell}$ of $TiO_2$ dosage, increasing of the efficiency reached a plateau. 3. The addition of methanol as hole scavenger enhanced the removal efficiency of Ag(I) but the removal efficiency reached a plateau over some level of methanol. 4. It was found that $TiO_2$ photocatalysis was effective method to remove of Ag(I) from aqueous solution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.36-41
• /
• 1983

These studies were carried out to investigate the effects of potassium salts on the changes of chemical properties in submerged soil. Rice plants were cultured in submerged soil using potassium salts. Obtained results were as follows. In the submerged soil cultured with rice plants the value of pH was higher in the potassium chloride plot than in the potassium sulfate plot. The leaching of cations such as calcium, magnesium, potassium and ammonium were higher in the potassium chloride plot than in the potassium sulfate plot. On the other hand, the leaching of phosphate ion was slightly higher in the potassium sulfate plot than in the potassium chloride plot. The leaching of iron was higher in the planted plot than in the non-planted plot, but that of silica was higher in the non-planted plot than in the planted plot. However, the leaching of iron and silica was not affected by potassium salts.

• Journal of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.47-50
• /
• 1968

Two methods for separation of the impurities from bismuth metal have been found by the use of Dowex $1{\times}4,$ anion exchange resins. The first method is that Dowex $1{\times}4$ resins are packed into the two stage columns (height of under stage is 22cm and upper stage is 3cm, and diameter of columns are 1.5cm), and the impurities of Pb(II), Ag(I) and Cu(II) are separated by the eluent of 7.5M HCl soln, Zn(II), Fe(III) by 0.5M HCl solns, and Te(IV) in the upper stage by 2M NaOH soln. Remained Au(III) in the upper stage is determined by the ignition with resins. The 2nd method is that for the separation of all the impurities simultaneously the same resins are packed into single stage column(height is 10cm and diameter is 1.5cm), and all the impurities of Pb(II), Zn(II), Cu(II), Fe(III) and Ag(I) are eluted by the eluent of 0.5M HCl soln. Separated impurities are determined by the colorimetry.

• Journal of the Korean Chemical Society
• /
• v.53 no.3
• /
• pp.368-376
• /
• 2009

In this study we investigated and tried to understand problems monitored in an experiment on reactivity of metals in chemistry I. Three problems were discussed. First, the reason that aluminium plate does not react with other metal ions such as zinc, iron and copper was studied and the way to overcome this problem was suggested. Second, the reason that the bubbles were generated when FeS$O_4$(aq) and Zn(s) react was discussed. Third, the precipitates which appeared in the reaction of FeS$O_4$(aq) and Zn(s) were identified. Through reference study and experimental investigation, we could reach the following results. First, aluminium could not react with other metal ions due to the surface oxide layer that is formed very fast and prevents aluminium from reacting with metal ions in solution. This problem could be overcome by allowing a competing reaction of acid and aluminium during the reaction of aluminium and metal ions. Second, the observed bubbles were identified to be hydrogen gas, produced by the reaction between metals and hydronium ion in the solution. Third, black precipitates that were produced on the surface of zinc plate and exhibited magnetic property were characterized to be $Fe_3O_4$(s), and brown precipitates that were produced in the solution phase were to be $Fe_2O_3$(s) by the analysis of X-ray photoelectron spectra.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2003

We have grown D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ (x = 0.5,1.0, 1.5,2.0) magnetic garnet thin films upon $Al_2$O3i and GGG substrate using Pechini process. The annealing temperature to get single phase D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ garnet is dependent on substrate, i.e. the annealing temperature for GGG substrate il 5$0^{\circ}C$ lower than that for $Al_2$ $O_3$ substrate. The grains of garnet thin film grown on GGG (111) plane align along [111] direction, and in this case the hysteresis curve does not saturate up to H : 5000 Oe. We attribute this phenomenon to rotation magnetization process. The maximum amount of Bi substitution in polycrystalline D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ thin film prepared by Pechini process is restricted to 2.0 Bi atom/unit cell, and this value is less than that in single garnet crystall grown by LPE method.own by LPE method.ethod.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.229-238
• /
• 2021

The selective permeate transport characteristics of iodine ion at follicle cell membrane model in thyroid which irradiated by high energy x-ray(linac 6 MV) was investigated. The follicle cell membrane model used in this experiment was a polysulfonated copolymerized membrane of poly(4-vinylpyridine-co-acrylonitrile:VP-AN). The difference of membrane thickness [2 mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/w)], OH- concentration were occurred at difference of I- concentration and quantity of thyroid hormone, respectively. The tensile strength in fixed carrier concentration[VP-AN% (w/w): 0-62 %] of irradiated membrane was found to be decreased about 1.2-1.8 times than non-irradiated membrane. The I- selective permeate initial flux with increase of membrane thickness [2mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/ w)], OH- concentration in irradiated membrane were found to be decreased about 2.1-4.5 times, about 2.2-2.5 times, about 2.1-2.67 times than non-irradiated membrane, respectively. As a result, the quantity of thyroid hormone was decreased at irradiated membrane than non-irradiated membrane. The decrease of thyroid hormone was occurred at hypothyroidism and hyperthyroidism, thyroid cancer, and so on. As the thyroid hormone in cell membrane model were abnormal, cell damages were appeared at cell.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.62-62
• /
• 1998

다이아몬드상 카본은 경도, 열전도 둥이 다이아몬드와 비슷하면서도 박막 성장이 쉬워 다른 재료의 표면보호용 코탱막으로 웅용되고 있다. 최근에 다이아몬드상 카본 박막의 이러한 특성은 전계방출 음극 소자가 이온 충돌, 온도 상승에 의해 마모되는 것을 방지 하는데도 용용되고 있다. 이러한 보호막 기능뿐만 다이아몬드상 카본 박막용 편평한 기 판에 성장시켜 평판 전계방출 음극으로 이용하는 것도 시도되고 었다. 본 연구에서는 이 온빔 스퍼트링 방법으로 다이아몬드상 카본 박막을 성장시켰다. 합성하기 전 챔버의 기 본 압력은 3.2 X 10-7 Torr이었다. 기판으로는 타이타니움 평판, n-타엽의 실리콘 평판, I ITO가 코탱된 유리 평판올 사용하였으며, 중착 전에 기판올 400 V, 15 mA의 알곤 이온 으로 1분간 스퍼트링하여 불순물 막을 제거하였다. 박막 합성시에는 챔버 압력이 3.5 x 1 10-4 To$\pi$가 될 때까지 알곤을 채우고 알곤빔 전류는 30 mA에 고정시키고 빔 에너지를 각각 750, 1000, 1250 eV로 바꾸면서 타켓올 스퍼트랭하였다. 질소를 다이아몬드상 카본 박막애 첨가하면 n-타업 불순물 주입 효과가 있게된다. 질소가 첨가된 박막을 만들기 위 해서는 별도의 이온 총올 사용하여 탄소 타켓 스퍼트령과 동시에 기판에 질소 이온을 입 사시켰다. 만들어진 시료로부터 3 X 10-7 To$\pi$ 진공에서 전류-전압 특성올 조사하였다. 양극으로는 면평한 금속판올 음극 위 150 11m 높이에 셜치하였다. 박막의 물성은 전자 현미경, 오제 전자분광 둥으로 조사하였다. 다이아몬드상 카본 박막을 다른 종류의 편명 한 기판에 합성 조건올 바꾸면서 성장시켜 박악의 특성파 기판이 전계방출에 미치는 영 향을 조사하였다. 합성된 다이아몬드상 카본필름의 전자방출 특성은 기판의 종류와 필름 의 구조 및 필름의 두께에 따라 크게 변화하였다. 이러한 전자방출 거동으로부터 전계 방출 메커니즘을 제시하고자 하였다. 또한, 다이아몬드상 카본 박막으로부터의 전계방출 은 전기장올 인가하는 방법에도 영향을 받는다. 따라서, 본 연구에서는 전기장올 순환 인 가하면서 전계방출 전후의 박막 특성 변화를 조사하여 전계방출 메커니즘올 연구하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.69-76
• /
• 2016

Current driving capability of MCT (MOS Controlled Thyristor) is determined by turn-off capability of conducting current, that is off-FET performance of MCT. On the other hand, having a good turn-on characteristics, including high peak anode current ($I_{peak}$) and rate of change of current (di/dt), is essential for pulsed power system which is one of major application field of MCTs. To satisfy above two requirements, careful control of on/off-FET performance is required. However, triple diffusion and several oxidation processes change surface doping profile and make it hard to control threshold voltage ($V_{th}$) of on/off-FET. In this paper, we have demonstrated the effect of $V_{th}$ adjustment ion implantation on the performance of MCT. The fabricated MCTs (active area = $0.465mm^2$) show forward voltage drop ($V_F$) of 1.25 V at $100A/cm^2$ and Ipeak of 290 A and di/dt of $5.8kA/{\mu}s$ at $V_A=800V$. While these characteristics are unaltered by $V_{th}$ adjustment ion implantation, the turn-off gate voltage is reduced from -3.5 V to -1.6 V for conducting current of $100A/cm^2$ when the $V_{th}$ adjustment ion implantation is carried out. This demonstrates that the current driving capability is enhanced without degradation of forward conduction and turn-on switching characteristics.