• Journal of Korean Society of Environmental Engineers
• /
• 제38권6호
• /
• pp.279-290
• /
• 2016

The performance of upflow anaerobic bioelectrochemical reactor (UABE), equipped with electrodes (anode and cathode) inside the upflow anaerobic reactor, was compared to that of upflow anaerobic sludge blanket (UASB) reactor for the treatment of acidic distillery wastewater. The UASB was stable in pH, alkalinity and VFAs until the organic loading rate (OLR) of 4.0 g COD/L.d, but it became unstable over 4.0 g COD/L.d. As a response to the abrupt doubling in OLR, the perturbation in the state variables for the UABE was smaller, compared to the UASB, and quickly recovered. The UABE stability was better than the UASB at higher OLR of 4.0-8.0 g COD/L.d, and the UABE showed better performance in specific methane production rate (2,076mL $CH_4/L.d$), methane content in biogas (66.8%), and COD removal efficiency (82.3%) at 8.0 g COD/L.d than the UASB. The maximum methane yield in UABE was about 407mL/g $COD_r$ at 4.0 g COD/L.d, which was considerably higher than about $282mL/g\;COD_r$ in UASB. The rate limiting step for the bioelectrochemical reaction in UABE was the oxidation of organic matter on the anode surface, and the electrode reactions were considerably affected by the pH at 8.0 g COD/L.d of high OLR. The maximum energy efficiency of UABE was 99.5%, at 4.0 g COD/L.d of OLR. The UABE can be an advanced high rate anaerobic process for the treatment of acidic distillery wastewater.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제8권3호
• /
• pp.89-96
• /
• 2000

Waste oyster shell was used to study the applicability on anaerobic composting of garbage. Experiment was conducted with five anaerobic reactors. After garbage and compost for inoculation were mixed, waste oyster shell was added into mixed waste in mesophillic temperature for 60 days with 30%, 60% respectively. The amount of produced methane gas, gas composition, organic removal efficiency and pH were measured. Result showed that the amounts of produced gas were 0.62 l /g-VS in R-1, 0.63 l /g-VS in R-2, 0.16 l /g-VS in R-3, 0.75 l /g-VS in R-4, 0.21 l /g-VS in R-5 and the amounts of produced methane gas were 0.32 l /g-VS in R-1, 0.37 l /g-VS in R-2, 0.04 l /g-VS in R-3, 0.42 l /g-VS in R-4, 0.05 l /g-VS in R-5. Proportion of mathane gas which determines the efficiency of anaerobic composting was over 55%. pH were 6.0~8.0 in R-2 and R-4 which contained 30% of waste oyster shell and pH were increased over 8.5 in R-3 and R-5 which contained 60% of waste oyster shell. Since pH were so high and it had a negative effect on microbial growth, anaerobic reaction were not well operated in R-3 and R-5.

• Journal of Korean Society of Environmental Engineers
• /
• 제29권1호
• /
• pp.106-112
• /
• 2007

Ammonia oxidizing bacteria(AOB) oxidize ammonia to nitrite and are important microorganisms which control nitrification. Several environmental factors such as dissolved oxygen(DO), temperature and pH influence the growth of AOB. In this work, to assess the effect of DO concentration on AOB, four aerobic biofilm reactors packed with ceramic media were operated 1, 3, 5 and 7 mgDO/L, respectively. The optimal DO concentration with stable nitrification efficiency in aerobic biofilm reactor was above 5.0 mg/L. To assess the relationship between the DO concentration and the characteristics of AOB in aerobic biofiim reactor, DGGE and cloning based on PCR targeting 16S rRNA and amoA gene were performed. Additionally, INT-DHA activity test was proceeded to estimate the activity of AOB. As the results of DGCE and cloning, the community of AOB and the ratio of Nitrosomonas sp. changed little in spite of different nitrification efficiencies. INT-DHA activity test showed that the activity of AOB decreased as DO concentration decreased. It means that DO concentration does not affect the community of AOB, but the activity of AOB.

• Korean Journal of Materials Research
• /
• 제9권12호
• /
• pp.1196-1204
• /
• 1999

We have carried out copper MOCVD(metalorganic chemical vapor deposition) onto the reactive sputtered PVD-TiN and rapid thermal converted RTP-TiN substrates using direct liquid injection for effective delivery of the (hfac)Cu(vtmos) [$C_{10}H_{13}O_{5}CuF_{6}$Si: 1,1,1,5,5,5-hexafluoro-2,4- pentadionato (vinyltrimethoxysilane) copper (I)] precursor. Especially, the influences of deposition conditions and the substrate type on growth rate, crystal structure, microstructure, and electrical resistivity of copper deposits have been discussed. It is found that the film growth with 0.2ccm precursor flow rate become mass-transfer controlled up to Ar flow rate of 200sccm and pick-up rate controlled at a vaporizer above 1.0Torr reactor pressure. The surface-reaction controlled region from 155 to 225$^{\circ}C$ at 0.6Torr reactor pressure results in the apparent activation energies of 12.7~14.1kcal/mol, and above 224$^{\circ}C$ the growth rate with $H_2$ addition could be improved compared to the pure Ar carrier. The Cu/RTP-TiN structures which have high copper nucleation density in initial stage of growth show more pronounced (111) preferred orientations and lower electrical resistivities than those on PVD-TiN. The variation of electrical resistivity with substrate temperature reflects the three types of film microstructure changes, showing the lowest value for the deposit at 165$^{\circ}C$ with small grains of good contacts.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.1-4
• /
• 2019

In this study, an anthracene cross-linker is introduced to enhance the catalytic activity of glucose oxidase (GOx) based catalysts and to increase the amount of enzyme loading. The crosslinked GOx is bonded with the CNT/PEI support using the electrostatic interaction (AC[CNT/PEI/GOx]). Electrochemical evaluations are done to evaluate the performance of this catalyst and the performance of CNT/PEI/GOx catalyst is also measured as a control. According to the measurements, it is confirmed that the amount of loaded GOx increases, while $K_m$ value calculated by Lineweaver-Burk plot shows that AC[CNT/PEI/GOx] ($K_m$ : 0.73 mM) is superior to CNT/PEI/GOx ($K_m$ : 1.71 mM) without cross-linking reaction. Based on these effects, it is demonstrated that the maximum power density of the enzymatic biofuel cell using AC[CNT/PEI/GOx] increases from $21.2{\mu}W/cm^2$ to $57.4{\mu}W/cm^2$.

• Journal of the Microelectronics and Packaging Society
• /
• 제15권3호
• /
• pp.41-46
• /
• 2008

Etching kinetics of $EAGLE^{2000TM}$ LCD glass was investigated using 2.5MHF-xMHCl$(x:0\sim8)$ acid mixtures. It was concluded that the reaction of HF-containing solutions with the glass was the rate-determining step for the dissolution process when considering following observations; the value of the activation energy $35\sim45$ kJ/mol and insensitivity of the dissolution rate to the etching time and the moving velocity of the glass into the solution. The etching rate linearly increased with increasing the HCl concentration in the etchant. It was also observed that the etched surface was as smooth as the original surface by addition of HCl and increase in etching temperature. This is due to the catalytic role of the $H_{3}O^{+]$ ions in the dissolution process.

• Journal of Korea Soil Environment Society
• /
• 제5권1호
• /
• pp.97-108
• /
• 2000

A Gram-type negative bacteria that can utilize crude oil as the sole source of carbon and energy was isolated from an activated sludge of a local sewage treatment plant and identified tentatively as belonging to the genus Acinetobacter. The isolate could degrade n-alkanes and unidentified hydrocarbons in crude oil and utilize n-alkanes, hydrophobic substrates, as sole carbon and energy sources. n-Alkanes from tridecane (Cl3) to triacontane (C30) in crude oil were degraded simultaneously with no difference in degradation characteristics between the two close odd and even numbered alkanes in carbon numbers. The linear growth of the isolate and the degradation characteristics of Pr-alkanes suggested that the transport of substrates from the oil phase to the site where the substrates undergo the initial oxidation in microorganism might be the rate limiting in the biodegradation process of crude oil constituents. The remainder fraction of substrates after cultivation was considered to reflect the hydrocarbon inclusions in the cell mass, characteristics in Acinetobacter species, and to control the transport of substrates from crude oil phase. On the basis of the results, the isolate was considered to play an important role in the degradation study of hydrophobic environmental pollutants.

• Korean Journal of Agricultural Science
• /
• 제20권2호
• /
• pp.189-200
• /
• 1993

Ornithine decarboxylase is the first and rate limiting enzyme in the biosynthesis of polyamines in mammalian cells. During cell growth the enzyme is regulated by rapid changes in the level of its mRNA and protein. To explore the molecular basis of these changes, ODC-specific complementary DNA (cDNA) clones were isolated from a bovine cDNA library. This region of the cDNA contained a portion of the open reading frame, a 3'noncoding region, and a poly-A tail of 456, 348, and 14 nucleotides, respectively. A comparison of the deduced sequence of the carboxyl terminal 151 amino acids of ODC with amino acid sequences in the same region of the enzyme from human, mouse, rat, and hamster showed greater than 88% identity in these proteins. The highly conserved nature of the amino acid sequences may be related to the important role of ODC in cell growth and differentiation.

• Applied Chemistry for Engineering
• /
• 제5권2호
• /
• pp.255-262
• /
• 1994

Arc melted Ti-5Bi alloy was oxidized by thermal oxidation method. In the present study free energy efficiency(${\eta}_e$) of titanium oxide electrode(TOE) was measured as a function of light intensity and light energy. Flat-band potential of TOE was measured as a function of the light intensity and the solution pH. The ${\eta}_e$ of TOE increased with the increase of light intensity and tight energy to maximum value of 3.2% and 13%, respectively, at $0.2W/cm^2$ and 4.0eV. The ${\eta}_e$ was strongly dependent on the magnitude of the bias voltage. Maximum value was found at 0.5V bias. Photocurrent of TOE was controlled by electron-hole pair generation in depletion layer. The flat-band potential of the illuminated TOE shifted to -0.065V/decade with increasing light intensity. With the decrease of pH of electrolyte, flat-band potential shifted to anodic direction. The experimental slope was in good agreement with the Nernstian value of 0.059V/pH decade.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.405-410
• /
• 2011

A study on chemical vapor deposition(CVD) of $WO_3$ and the electrochromic properties of the CVD $WO_3$ films have been carried out. The crystalinity, purity, and growth rate of the films depending on substrate temperatures are investigated. The highest growth rate is $8{\mu}m/min$ at the substrate temperatures above $300^{\circ}C$ and the estimated activation energy for overall film growth is about 45.9 kJ/mol at the temperatures of $225{\sim}275^{\circ}C$, where the CVD process is controlled by a surface reaction kinetics. The films grown below $275^{\circ}C$ are amorphous, while those deposited above $300^{\circ}C$ are crystalline. The effects of thickness and deposition temperature of the $WO_3$ films on electrochromic activity are also investigated. The coloration efficiency of the films increases with increase in film thickness and decrease in deposition temperature.