• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.88-95
• /
• 2015

The thickness of adsorbed molecular layers is the most critical factor in studying thin-film lubrication, and it is the most essential parameter that distinguishes thin-film from thick-film lubrication analysis. The thin film between the shaft and bearing surface within a very narrow gap was considered. The general Reynolds equation has been derived for calculating thin-film lubrication parameters affecting the performance of the circular journal bearing. Investigation of the load-carrying capacity and pressure distribution for the journal bearing considering the adsorbed layer thickness has been carried out. A Reynolds equation appropriate for the journal bearing is used in this paper for the analysis, and it is discussed using the finite difference method of the central difference scheme. The parameters, such as eccentricity and attitude angle, are used for discussing the load-carrying capacity of the journal bearing. The results reported in this paper should be applied to analysis of the journal bearing with different lubrication factors. The steady-state analysis of the journal bearing is conducted using the Reynolds model under thin-film lubrication conditions. For a journal bearing, several parameters, such as a pressure, load capacity, and pressure components of the bearing can be obtained, and these results can be stored in a sequential data file for later analysis. Finally, their distribution can be displayed and analyzed easily by using the MATLAB GUI technique. The load-carrying capability of the journal bearing is observed for the specified operating conditions. This work could be helpful for the understanding and research of the mechanism of thin-film lubrication.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1055-1061
• /
• 2000

The kinetics of tar formation has been studied experimentally and modeled mathematically for waste lubricating oil after pyrolyzed at batch reactor. And stabilization of pyrolyzed oil has been studied. A combination of series and parallel reaction was assumed for the mechanism of tar formation. From the proposed kinetic model, pyrolyzed oil to tar was found to be rate limiting step for tar formation. It was found that the fly ash and coke had the ability to remove materials of tar formation and to protect oxidation of pyrolyzed oil.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.28-35
• /
• 1991

3원통/링 마모시험기를 사용하여 윤활유 공급하에서 미끄럼 마모시험을 수행하였다. 엔진유에 첨가되는 대표적 첨가제인 ZDDP, 청정제, 분산제의 첨가제 3종과 모델 산호물로서 유성제인 스테아린산을 선택하여, 그 배합유의 마모방지특성을 조사하였다. 청정제 및 분산제 각각의 첨가에 의해 마모방지특성은 향상되었으나, 청정제 및 분산제를 동시에 첨가할 경우 마모방지성능의 향상효과는 없어졌다. 또한, 모델산화물인 스테아린산의 첨가로 인하여 ZDDP의 마모방지작용은 나빠지나, 청정분산제가 그 악영향을 억제하는 작용을 한다.

• Journal of the KSME
• /
• v.32 no.11
• /
• pp.917-926
• /
• 1992

트라이볼로지의 핵심분야인 마찰, 마멸에 대해 간단히 살펴보았다. 과학의 급속한 발전에도 불 구하고 아직도 이들에 대한 완전한 지식은 아직 요원한 상태이다. 그러나 현재까지 알려진 지 식으로도 기계시스템의 최적설계에 크게 도움이 된다는 사실에 대해서는 의심의 여지가 없다. 앞에서 함께 살펴본 마멸 입자에 대한 소개는 마찰과 마멸의 복합적인 산물로서 이의 관찰을 통해 분석하고자 하는 기계시스템의 상태를 효과적으로 진단하여 트라이볼로지적 거동을 이해 하는 데에 중대한 정보가 된다. 따라서 마찰과 마멸에 대한 궁극적인 연구와 함께 그 산물인 마멸입자에 대한 보다 적극적인 이해와 지식의 축적은 요소(tribo-elements)의 고성능, 고정밀 화에 크게 이바지할 것이다.

• Tribology and Lubricants
• /
• v.12 no.2
• /
• pp.1-7
• /
• 1996

최근까지 개발되어진 대체냉매는 매우 다양한데, 실제 적용되고 있고 또한 적용이 고려되고 있는 대체냉매는 주로 기존의 냉매와 열역학적인 특성이 유사하여 기존의 냉동시스템의 구조변경 없이 사용될 수 있는 것들이 주류를 이루고 있으며, 현재 오존층 파괴 효과가 없는 HFC(Hydrofuorocarbon)계통의 냉매가 많이 개발되고 있다. 대체냉매의 적용에는 냉매의 열역학적인 성질 뿐만 아니라 ㅎ 화학적 안정성, 윤활유와의 혼합성, 연소성 등 많은 문제를 고려해야 한다. 본 해설에서는 대체냉매를 적용한 공조시스템의 개발 동향 및 문제점에 관해서 간단히 서술하였으며, 비록 제한적이기는 하나 주로 삼성전자에서 생산되고 있는 냉장고와 에어콘을 모델로 하여 설명하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.453-455
• /
• 2005

Ferritic STS 439 Steel sheet were deformed by hot rolling with and without lubricant. The effect of friction between roll and specimen on inhomogeneous texture was studied by means of EBSD, XRD texture analysis. The textures were compared with those of obtained by Taylor FEM simulation. High friction between roll and sheet gave rise to the formation of the inhomogeneous shear texture through thickness.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.117-120
• /
• 1996

본 연구에서는 VHVI기유, 용재 추출로 제조된 기유를 사용하는 엔진유 3종을 대상으로 하여 엔진유가 배기 가스에 미치는 영향을 연구하였다. 본 연구를 통하여 얻은 결과는 다음과 같다. 1. 엔진유의 증발감량에 따라 엔진 배기 가스에 미치는 영향은 각기 다르게 나타났다. 2. 저증발 감량의 특성을 가지는 VHVI 기유를 사용한 엔진유는 고속, 전부하(3000 rpm, 37.5 kW)조건에서 NOx 저감 효과가 있다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.120-126
• /
• 1991

An expanded scheme of a direct numerical solution method for solving the Navier-Stokes equation considering the modified boundary conditions for gas lubrication with ultra low clearance at high .LAMBDA. region is presented. Many examples are calculated by this scheme and their results are compared to the previous solutions using P$^{2}$H$^{[-992]}$ . This scheme has the advantages of fast calculation time and stable convergence in high .LAMBDA. region, and gives very good results in the case of fluid film thickness discontinuity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.63-68
• /
• 2017

Friction occurs when surfaces that are in contact move relatively between solid surfaces, fluid layers, and materials slide against one another. This friction force causes wear on the contact surface, generates unwanted heat and leads to performance degradation. Thus, much research has been performed to avoid friction reduction. Among these studies, a textured surface that has micro patterns on the surface has drawn attention for its ability to reduce friction. A mathematical model is developed in this study to examine friction reduction due to the texture of a surface. Numerical simulations are carried out with respect to various factors such as the shape aspect ratio and texture depth of a diamond-shaped texture in the hydrodynamic lubrication regime. As a result, a shape aspect ratio of 1 is best for friction reduction.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.2
• /
• pp.13-18
• /
• 1996

In this study, contact lens care solutions were compared to each other for cytotoxic effect on cultured mouse fibroblasts by the use of neutral red(NR) assay. This study tested the cytotoxicity of 12 cleaning solutions, 2 lubricants and 5 multipurpose solutions(MPS) at 1%, 2%, 3% and 5% concentrations. These solutions are manufactured in Korea and foreign countries. The relative cytotoxic comparison of these solutions showed that some of them are toxic, three of the cleaning solutions were especially highly toxic 10 cells, so most fibroblasts were dead at 1% concentration. The toxic cleaning solutions have more components than other solutions. But both lubricants and MPSs are non-cytotoxic 10 cells. Some of these solutions did not have any descriptions or indications. They are very dangerous to eyes. From this study, contact lens care solutions should be tested for cytotoxic effects.