Browse > Article
http://dx.doi.org/10.14775/ksmpe.2017.16.2.063

Effect of the Texture Shape Aspect Ratio on Friction Reduction in a Hydrodynamic Lubrication Regime  

Lee, Daehun (School of Mechanical Engineering, Yeungnam University)
Park, Sang-Shin (School of Mechanical Engineering, Yeungnam University)
Ko, Tae Jo (School of Mechanical Engineering, Yeungnam University)
Shim, Jaesool (School of Mechanical Engineering, Yeungnam University)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.16, no.2, 2017 , pp. 63-68 More about this Journal
Abstract
Friction occurs when surfaces that are in contact move relatively between solid surfaces, fluid layers, and materials slide against one another. This friction force causes wear on the contact surface, generates unwanted heat and leads to performance degradation. Thus, much research has been performed to avoid friction reduction. Among these studies, a textured surface that has micro patterns on the surface has drawn attention for its ability to reduce friction. A mathematical model is developed in this study to examine friction reduction due to the texture of a surface. Numerical simulations are carried out with respect to various factors such as the shape aspect ratio and texture depth of a diamond-shaped texture in the hydrodynamic lubrication regime. As a result, a shape aspect ratio of 1 is best for friction reduction.
Keywords
Shape Aspect Ratio; Texture Depth; Hydrodynamic Lubrication;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Hamilton, D. B., J. A. Walowit. and C. M. Allen, "A theory of lubrication by microirregularities," Journal of Basic Engineering, Vol. 88, No. 1, pp. 177-185, 1966.   DOI
2 Wakuda, M., Yamauchi, Y., Kanzaki, S. and Yasuda, Y., "Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact," Wear, Vol. 254, No. 3, pp. 356-363, 2003.   DOI
3 Varenberg, M., Halperin, G. and Etsion, I. "Different aspects of the role of wear debris in fretting wear," Wear, Vol. 252, No. 11, pp. 902-910, 1966.   DOI
4 Yamakiri, H., Sasaki, S., Kurita, T. and Kasashima, N., "Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water," Tribology International, Vol. 44, No. 5, pp. 579-584, 2011.   DOI
5 Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G. and Etsion, I., "The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact," Tribology International, Vol. 38, No. 3, pp. 219-225, 2005.   DOI
6 Ma, C. and Zhu, H., "An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication," Tribology International, Vol. 44, No. 9, pp. 987-995, 2011   DOI
7 Wang, X., Kato, K., Adachi, K. and Aizawa, K. "Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water," Tribology International, Vol. 36, No. 3, pp. 189-197, 2003.   DOI
8 Nam-Seong Hwang, "A Study on Friction Characteristics According to Micro-dimple Patterns," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 124-130, 2015.   DOI
9 Uddin, M. S. and Liu, Y. W., "Design and optimization of a new geometric texture shape for the enhancement of hydrodynamic lubrication performance of parallel slider surfaces," Biosurface and Biotribology, Vol. 2, No. 2, pp. 59-69, 2016.   DOI
10 Tala-Ighil, N., Fillon, M. and Maspeyrot, P. "Effect of textured area on the performances of a hydrodynamic journal bearing," Tribology International, Vol. 44, No. 3, pp. 211-219, 2011.   DOI
11 Brizmer, V., Kligerman, Y. and Etsion, I., "A laser surface textured parallel thrust bearing," Tribology Transactions, Vol. 46, No. 3, pp. 397-403, 2003.   DOI
12 Kligerman, Y. and Etsion, I., "Analysis of the hydrodynamic effects in a surface textured circumferential gas seal," Tribology Transactions, Vol. 44, No. 3, pp. 472-478, 2001.   DOI
13 Ryk, G. and Etsion, I., "Testing piston rings with partial laser surface texturing for friction reduction," Wear, Vol. 261, No. 7, pp. 792-796, 2006.   DOI
14 Ji-Young Jeong., Yu Zhen., Sahar M. Sana Ullah. and Taejo Ko, "Slope Change of Surface Texturing Pattern Using Grinding," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 8-15, 2016.   DOI
15 Ko, T. J., Han, D. S., Qiu, K. and Park, J. K. "Grinding Technology for Surface Texturing," Journal of the Korean Society for Precision Engineering, Vol. 31, No. 5, pp. 367-373, 2014.   DOI