• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.279-290
• /
• 2005

The purpose of this study is to attempt a Analysis of a pointed-end Equipment Arm Safety-Accident for Fault Tree Analysis. Three major techniques were used first problem is Z-Model by which accident Analysis & prevention of a pointed-end Industry can be made, Fault Tree Analysis(FTA) bywhich quantification of a pointed-end Equipment accident Analysis can be made it 5 years in past and the third, manual-written by which minimal cut set to accident can be Identified. A example has been made of issue point a pointed-end Equipment that the Arm in loader happen to Injuries. According to the Analysis lack of safety knowledge, unsafety-behavior seem to be the primal cause of accident. Comparision of the accident cause to actual report demonstratesthat the FTA a efficient tool for Industrial Accident prevention.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.33-39
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

• 대한안전경영과학회지
• /
• 제8권2호
• /
• pp.13-23
• /
• 2006

The present study has investigated the patterns and the causes of safety -accidents on the accident-data in semiconductor Industries through near miss report the cases in the advanced companies. The ratio of incomplete actions to incomplete state was 4 to 6 as the cases of accidents in semiconductor industries in the respect of Human-ware, Hard- ware, Environment-ware and System-ware. The ratio of Human to machine in the attributes of semiconductor accident was 4 to 1. The study also investigated correlation among the system related to production, accident, losses and time. In semiconductor industry, we found that pattern of safety-accident analysis is organized potential, interaction, complexity, medium. Therefore, this study find out that semiconductor model consists of organization, individual, task, machine, environment and system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.311-318
• /
• 2004

The Study lay Emphasised on to Investigate Human Related Causes of a Pointed End Equipment Accident and the Basic data for Analyzing Human-Error Prevention Program. Peter Son's Model of Human-Error Accident Causation and Cooper's Model of Safety Culture Were Applied to Analyze the Severe Cause of a Pointed End Equipment for Last 5 Years. Through to Analyzing the Cause of Equipment Accident of Human-Error, Expert's Opinion and Experience theory Method was Reflected. The Analyses Showed What the Immature and Inexperient Error Were Major Causes of a Pointed and Equipment Accident The Cause of Human-Error was Found with Respect to Human, Tasks, Acknowledge, Organization.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.1-11
• /
• 2002

It has been Management for stabilize Enterprise-Management for Economic demand for to Productivity, Automation, customer satisfaction, Especially Semiconductor-Industry has been, potential-risk in working to factory to machine equipment, all kinds of utility, gas, chemical, electronic, Fire. This study of basic-purpose has Research Different From as Follow to analysis and Solution For semiconductor product Factory of a actual point Data and specific-gravity to Relation for company-Injury. 1. It has been try to Injury-Tendency and cause-Analysis for our County-Manufacture-Occupation. 2, Semiconductor Injury of Actual-condition in Enforcement for problem and Analysis that Injury Problem has occupated it Submitted to Solution for ordinary Injury theory View to point Solve at for New Model has applicated to that nilem for processed to Solution.

• 산업경영시스템학회지
• /
• 제32권4호
• /
• pp.101-106
• /
• 2009

The unsafe act and unsafe condition is due to human error that experience 80% of safety accidents. Accordingly, one of the most important issues to reduce industrial accidents as a whole, is how to reduce the accident rate by the human error. Therefore, this paper describes the development of quantitative risk assessment (QRA) model by ergonomics for reform of safety consciousness on the semiconductor industry. Unconsciousness, disregard, ignorance, recklessness, and stress among the human factors are selected for conscious reform. Finally, the QRA model is efficiently expected to contribute towards improving continuous self-safety and health and safety culture campaign in order to prevent industrial accidents.

• 비파괴검사학회지
• /
• 제12권2호
• /
• pp.21-29
• /
• 1992

Acceleration signal characteristics of a steel plate, impacted by steel balls, were studied in an attempt to apply the experimental results to the impact location and mass estimation of metallic loose parts in the cooling system of nuclear power plants. Experimental results show that the variation of maximum acceleration amplitude and impact contact time due to the change of ball mass and impact velocity can be well explained by the Hertz impact theory. The frequency spectral pattern shifted slightly in spite of the increase of impact velocity and impact location. Ball mass, however, strongly affected the frequency spectral pattern. Hence the frequency spectrum can be used for estimation of the mass of unknown loose parts in the cooling system.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
• /
• pp.904-906
• /
• 2005

소프트웨어 개발의 생산성을 높이고 신뢰성 있는 프로그램을 개발하기 위하여 테스트 자동화에 대한 연구가 활발히 진행되고 있다. 임베디드 소프트웨어는 일반 소프트웨어 개발 환경과는 달리 호스트-타겟(host-target) 구조의 교차 개발환경에서 개발이 이루어지고 있다. 본 논문은 임베디드 소프트웨어의 개발 환경에 맞추어 제한된 자원의 특성을 고려한 원격 단위 테스팅 도구를 제안한다. 제안하는 원격 단위 테스팅 도구는 XML 테스트 스크립트를 기반으로 대상 소스 언어에 맞는 테스트 드라이버를 생성하여 테스트 대상과 함께 테스트 작업 용구(Test harness)를 생성한다. 이러게 생성된 테스트 작업 용구는 이더넷(ethernet)을 통해 타겟(target)으로 전송되어 테스트를 수행한 후, 테스트 결과 로그를 호스트로 전송한다. 호스트에서는 로그를 수집하여 XML형태의 파일로 제공하여 다양한 형태의 리포트 뷰(View)를 가능하게 한다. 본 논문의 원격 단위 테스팅 도구는 임베디드 소프트웨어 개발 단계에서 반복적인 단위 테스팅의 절차를 간소화 하여 보다 효율적이고 신뢰성 있는 임베디드 소프트웨어 개발의 기회를 제공 할 것으로 기대된다.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.413-421
• /
• 1990

Acoustic emission signals due to leak from circular holes of 0.4, 1, 2 and 4mm diameter and rectangular slits of different geometry having the same cross section as 4mm diameter hole was studied both analytically and experimentally. Acoustic emission signals from a wide-band type transducer were transformed to digital signals through a digital oscilloscope, and $V_{rms}$ and frequency spectrum were obtained by processing digital signals. Relationships between acoustic parameters and fluid mechanical parameters were derived analytically. A quadrapole aerodynamic model was applied in the analysis of leak from the circular holes and $V_{rms}$ was found to be proportional to the root square of leak rate through the circular hole. A modified model based on dipole source mechanism and laminar equivalent diameter was applied in the analysis of leak signals from the rectangular slits. In the case of constant pressure, $V_{rms}$ increased as the laminar equivalent diameter of slit decreased. In the case of constant laminar equivalent diameter, however the result was similar to that for leak from the circular hole. The frequency spectra of leak signals shows the same frequency characteristics irrespective of the pressure difference.rence.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.