• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.2
• /
• pp.101-107
• /
• 2009

With the recent development of diagnosis using radiation and increasing demand of the medical treatment, we need to minimize radiation exposure dose. So, This is the method which reduce patient dose by measuring surface dose of radiographic change factor and by comparing theoretical and actual dose, when we take an X-ray which is generally used. By changing the factor of kV, mAs, FSD, whose range is 60 to 120 kV, 20 to 100 mAs, 80 to 180 cm, we compared theoretical surface dose with actual surface dose calculated by the simple calculation program, Bit system, and NDD-M method As a result, when kV and mAs were higher, theoretical surface dose and actual surface dose were more increased. but the higher FSD was, the more decreased surface dose was. According to this, the error were measured about 0.1 to 0.2 mGy in low dose part and about 0.7 to 1.5 mGy in high dose part. Therefore, this shows that theoretical surface dose calculation method is more correct in low dose part than in high dose part. In conclusion, we will have to make constant efforts which can reduce patient and radiographer's exposure dose, studying methods which can predict patient's radiation exposure dose more exactly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.92-97
• /
• 2006

A critical speed analysis is performed for a 30 ton thrust turbopump considering the casing structural flexibility. A full three-dimensional finite element method including rotor and casing is used to predict rotordynamic behavior. Rotor alone model and rotor-casing coupled model with fixed-fixed and free-free boundary conditions are calculated to investigate the effects of the casing structural flexibility. The stiffness of ball bearings are applied as unloaded and loaded values to consider rotor operating conditions in vacuum and real engine respectively. From the results of the numerical analyses, it is found that the effect of the casing structural flexibility reduces the critical speeds of the turbopump. Especially, the loaded rotor condition with higher bearing stiffness is affected dramatically rather than the unloaded rotor condition with lower bearing stiffness.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.574-581
• /
• 2012

Because of the exposed blade, the UAV using the rotors entail the risks during operation. While a wrapped duct around the fan blades reduces risks, it is a higher thrust performance than the same power load rotor. In this paper, for applying advantages of a ducted fan, the tri-ducted fan air vehicle configuration is proposed. The vehicle has three ducted fans. Two of them are the same shape and size and the third one is the smaller. It is possible to control a rapid attitude stability using thrust vector control. The equations of motion of the tri-ducted fan were derived. Lyapunov control input was applied to the system and stable inputs were derived. A nonlinear simulation was fulfilled by using parameters of a prototype vehicle. It verified a stable attitude and analyzed results.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.52-60
• /
• 2010

We investigated temporal changes of growth of hydrophytes, aquatic biota and absorption of nutrient depending on planting mat type (synthetic fiber, coconut fiber) of artificial vegetation island (AVI) through pilot test using AVI miniatures in Kyungan Stream area of Lake Paldang. There were not significant differences of the water quality parameters (DO, pH, conductivity, turbidity, temperature), phytoplankton and zooplankton abundance among AVI miniatures and control station. The benthic macroinvertebrates showed most individual numbers in the miniature which was made by synthetic fiber and planted with Phragmites australis. The average and maximum height of hydrophytes in AVI miniatures was similar except one miniature where Phragmites australis was planted in synthetic fiber mat and grew more slowly. The adsorbed amount of nutrients and microbes in coconut fiber mat were larger than those in synthetic fiber mat regardless of trophic state of installed waterbody. The continuous increase of adsorbed amount of nutrients and microbes of coconut fiber mat for 8 months in an oligotrophic lake indicates that coconut fiber mat is suitable for the planting mat of AVI in an oligotrophic lake where nutrients are limited for growth of hydrophytes.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.245-257
• /
• 2005

The purpose of the present study is examining the changes of runoff characteristics and extracting hydrologic parameters by applying ModClark model on grid divided watershed. Bocheong stream basin in Geum River system, one of the representative watersheds of IHP projects, is selected. Hydrology-based topographical informations are calculated using GIS data in the HEC-GeoHMS V1.1 extension in Arcview 3.2. The ModClark model requires precipitation data in a gridded format. The gridded data must be recorded in the HEC Data Storage System file format. Therefore, kriging method was used to interpolate the point values to create a grid that gives each cell over the entire watershed a precipitation value. Hec-DSSVue program was used to create DSS file for the rain gage data. The completed HEC-HMS model was calibrated for use in simulating three measured storm events and cell size of 10000m, 5000m, 2000m, 1000m was chosen for the application. As the result of applying distributed rainfall-runoff model to analyze relatively good agreement for peak discharge, runoff volume and peak time.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1196-1210
• /
• 1997

Timestamp-Ordering Prltocol among trancaction scheduling alforithms can cause the priority teversion that a transaction with higher priority is processed after the teansaction the trancaction withe lower priority by assigning timestamp to transactions entering system and scheduling them based on the timestamp.To prevent this reversion,we suggest a data priority-based timestamp ordering prioity within the same timestamp group after grouping teansactions into constant time interval based on entering points.To evaluate the performance of this protocol,we compared the performance of this protocol with that of others after constructing the simulation environment with real time database system.We verified that the performance of proposed protocol is supweior to that of timestamp ordering protocol under the comdition of high load and high data conflicts.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.137-155
• /
• 2005

This study was started with its consideration as materials showing original shapes of temple buildings in the late period of Chosun the photographs and drawings which contained in $\ulcorner$A Survey Report of Korean Architecture$\lrcorner$ made by Sekino Tadashi through his survey for 62 days(July 5${sim}$Sep. 4, 1902). Results of the study can be summarized as follows. During the period of Japanese occupation, Beomesa temple experienced frequent changes in building layout including the transfer and removal of buildings. Such frequent change began in spring, 1936 when a Buddhist monk of Beomeosa temple, Cha Woon Ho moved Gwaneumjeon, originally located to the light of the main building, to the left of the building and, on its original site, built up a 7-storied sarira tower. Though it is difficult to say that the study provides everything about Beomeosa temple, the researcher expects that the study would be the very basis on which changes in the building layout of the temple since the late period of Chosun can be researched. In conclusion, the researcher hopes that the above mentioned restoration plan would help originally restore or enlarge temples, further transmitting such restored or enlarged establishments as valuable cultural remains from generation to generation. In this respect, the researcher expects such restoration plan to be made in continuous and more detailed ways.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.633-640
• /
• 2001

Mobile agent is a software program that provides autonomy and mobility for the users in the networked computers by deciding its own movement place. Since mobile agent does not keep up the network connection and migrate its executable code under its own control, it can be often used in the unstable network conditions such as the wireless network and the heavy traffic network. In this paper, we show that the electronic commerce system can be developed efficiently to retrieve and trade the goods in the mobile computing environment by using the mobile agent paradigm. Multiple mobile agents migrate into the market directly, then negotiate and trade autonomously relevant goods and services. The execution result and executable code of the mobile agent are returned to the home place and reported to the users. We show that the mobile agent paradigm is suitable to build the mobile electronic commerce system by designing and prototyping the mobile market system.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.361-370
• /
• 2015

Wind energy began to receive attention as a new alternative fuel since 20 years ago and is growing as a booming global business model. Global wind power generation in the world has been continuously increasing for the past 10 years, accounting for over 30% of cumulative rate compared to total power generation. Global demand for wind power generation is gradually expanding due to restriction on carbon emission and environmental problems caused by increased greenhouse effect. Accordingly in this study, current transportation routes are classified into three types including access-priority route, economics-priority route, and convenience- priority route depending on distribution characteristics of wind power equipment in order to suggest transportation methods other than ships. The three types of transportation route that this study declared can make the Wind power equipment manufacturing companies can judge not only the duration of transportation but also effectiveness and economic feasibility. It means that the manufacturers can analyze and compare the effectiveness and economic feasibility, which are proceed by the shipping company and freight forwarder until now days.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.631-639
• /
• 1996

In this paper we discuss the elements which must be considered for collaboration- aware application design and their effcets on user interfaces. Collaboration-aware applications have inter-user and user/system interaction features besides generic real-time distribution system features and this restricts the design freedom with the requirement of consistent user interfaces. Programmers, therefore, must provide uniform and logically consistent user interfaces to user and, for this end, they should consider main design features such as concurrency control algorithms, system topology and object replication scheme. Among the design factors concurrency control algorithms have relatively significant impact on user interfaces and we consider the impact of concurrency control agorithms along with that of thesystem to pologyand the objectreplication scheme. Coshed/SAS, a groupeditor, is given as an example of application of the factors.