• 항공우주시스템공학회지
• /
• 제9권1호
• /
• pp.1-6
• /
• 2015

A critical speed analysis of oxidizer pump was peformed for a 7 ton class liquid rocket engine as the third stage engine of the Korea Space Launch Vehicle II. Based on the previously developed experimental 30 ton class turbopump and presently developing 75 ton class turbopump for the first and second stage rocket engine of Korea Space Launch Vehicle II, a layout and configuration of the 7 ton class turbopump rotor assembly are determined. A ball bearing stiffness analysis and rotordynamic analysis are performed for both of the bearing unloaded condition and loaded condition. Structural flexibility of the oxidizer pump casing is also included to predict critical speeds. From the numerical analysis, it is confirmed that the rotor system acquires sufficient separate margin of critical speed as a sub-critical rotor even though decrease of critical speed due to the casing structural flexibility.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (하)
• /
• pp.1485-1488
• /
• 2000

본 논문에서는 대규모 네트워크 환경에서의 분산된 침입탐지 시스템(Intrusion Detection System: IDS)을 망관리의 표준 프로토콜인 SNMP(Simple Network Management Protocol)와 이동 에이전트를 이용해서 진보된 형태의 다중호스트/네트워크 기반의 침입탐지 시스템 프레임워크를 제시하였다. SNMP 에이전트는 호스트 기반의 침입탐지를 수행하며 분산된 호스트들에서의 이동 에이전트는 플랫폼 독립적인 네트워크 기반의 침입탐지를 함으로써 시스템의 유연한 확장성 결함허용 및 시스템의 동적인 구성을 가능케한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.385-387
• /
• 1999

Brushless DC Motors are widely used because of their high power ratio and easy control. But the brushless DC Motors need rotor Position- and speed- sensor such as encoder, resolver and hall sensor. The position sensor has present several disadvantages from the standpoint of drive cost, machine size and reliability. Hall sensors are used generally because of low cost but their operating temperature is limited up to $75^{\circ}C$ because of sensitivity of temperature. Now a day many research projects are on the development of sensorless brushless DC motors to correct these disadvantages. In this paper, characteristics such as starting, change of speed and load of a sensorless brushless DC motor are investigated.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.775-776
• /
• 2010

액체로켓 터보펌프의 산화제펌프 벌류트 및 연료펌프 벌류트 케이징의 설계, 해석, 그리고 구조 시험을 수행하였다. 설계된 케이징 형상에 따라 벌류트 케이징을 주조하여 제작하였으며, 설계 검증 및 주조의 건전성을 검증하기 위하여 파열시험을 실시하였다. 파열시험 시 주요 지점에서 변형률을 측정하여 항복 시점을 조사하였으며 해석을 통한 예측과 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권4호
• /
• pp.13-24
• /
• 1994

The demand of clean energy, like liquefied gas(LNG), increase suddenly because it generates few polluting substances when burned and from the point of view with caloric value it generates ralatively less $CO_2$ gas than the other energy sources. LNG transpotion method of our country is marine transportion by ships because the LNG producing district is far away from Korea. Main engines for most LNG ships are steam turbines, and the efficiency of steam turbine is influenced by the degree of vacuum of main steam condenser. This paper introduce the design method of the vacuum system for high efficiency marine steam turbine. Especially, it is developed the CAD program for the large steam condenser and steam ejector. Also, it is designed the pilot plant including high pressure boiler for the performance test and maked a part of this plant.

• 산업경영시스템학회지
• /
• 제16권28호
• /
• pp.31-37
• /
• 1993

Box-Jenkins models have some important limitations to the procedure : (a) They require a great deal of time, efforts and expertise for the model identification. (b) They require an extensive amount of past observations to identify an acceptable model. (c) The model selected is a constant model in time. Therefore, the Kalman Filter is recommended as a technique to overcome the three problems mentioned above. The research reported here uses the Kalman Filter algorithm to propose Kalman-AR(p) model. The data analysis shows that the Kalman-AR(p) model proposed can be used to resolve the problems of Box-Jenkins AR(p)model. It is seen that the Kalman Filter has great potentials for real-time industrial applications.

• 한국유체기계학회 논문집
• /
• 제14권4호
• /
• pp.12-18
• /
• 2011

Volute casings for liquid rocket turbopump are designed and evaluated in a structural point of view. At the design step 3D modeling and finite element analyses are conducted iteratively. During the step various loads such as internal pressure, casing stiffness and mounting forces are considered in the analyses, along with the weight minimization effort. After the design step volute casings are manufactured by metal casting process, and then they are subjected to burst test for structural verification. In the burst test strains at several points are measured and compared with predicted values.

• 기술사
• /
• 제30권2호
• /
• pp.79-86
• /
• 1997

As network has high speed and wide communication capability, users demand diverse and new software to satisfy their needs. To meet users needs, the softwares for multimedia or groupware or distributed virtual environments can communicate the widely distributed information fast and accurately. Even though the technology for this is under development, it is deficient to support the reliable computer communication. Distributed Object System aims, as the new paradigm of distributed system software development to overcome this problem, to obtain in distributed environment the easiness of development and management, expandability, reusability which object oriented technologies support by solving the complexity of communication processing through the object oriented methods. This paper aims to introduce distributed object system, its technological properties and the current status and trend of technology development related to its standardization. Additionally, with explaining the Replicated Shared Object System(RSOS) which is developed in our country as one of the distributed object systems, its future prospects and technical issues are discussed.

• 한국농공학회논문집
• /
• 제46권3호
• /
• pp.43-54
• /
• 2004

For a given watershed that consists of urbanized areas, it was essential to predict how the runoff characteristics, such as runoff peak and volume, and travel time, change with time far planning and designing various kinds of hydraulic facilities with given recurrence interval. In this study, Mushim stream watershed was simulated using HEC-HMS model to get runoff characteristics of an urbanization basin. The results was showed that runoff was increased $1794.20{\sim}2104.65\;m^{3}/s$> and $1751.90{\sim}1961.30\;m^{3}/s$ according to the increased of rainfall and CN value recurrence interval in years. Observed storm was increased $497.91{\sim}581.71\;m^{3}/s$ and $506.57{\sim}537.01\;m^{3}/s$ for increased of CN value and impervious area. This paper is also possible to evaluate the effect of urbanization quantitatively.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2010년도 추계학술발표회 자료집
• /
• pp.199-202
• /
• 2010

우주발사체를 운용하는 발사장은 화재나 폭발의 위험에 많이 노출 되어 있다. 발사장은 비행시험전 발사체의 모든 상태를 점검 하고, 비행시험을 수행하는 곳이다. 또, 유사시에는 대량의 산화제와 연료가 누출 되어 화재 및 폭발사고로 이어질 가능성이 있는 곳이다. 나로우주센터에서 운용하는 우주발사체 나로호는 연료로 케로신(kerosene)을 사용하고, 산화제로 액화산소(LOX)를 사용한다. 발사대의 소화설비는 화재발생시 원격제어를 통해서 소화수와 소화약제를 분사하여 진화하는 방식으로 구성 되어 있다.