• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.2
• /
• pp.35-41
• /
• 2014

A rotordynamic analysis is performed for a turbopump of 7 ton class liquid rocket engine considering bearing housing structural flexibility. Stiffness and damping characteristics of ball bearings and pump noncontact seals are reflected in a rotordynamic model. A dynamic model of bearing housing with lumped mass and stiffness is also applied to the rotordynamic analysis. Rotor critical speed and onset speed of instability are predicted from synchronous rotor mass unbalance response and complex eigenvalue analyses. The bearing housing structural flexibility effect on rotordynamic characteristics is investigated for both of bearing loaded and unloaded conditions respectively. From the numerical analysis, it is found that the effect of the housing structural flexibility significantly reduces the rotor critical speed and onset speed of instability.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.12
• /
• pp.2996-3009
• /
• 1997

A lot of talks on the Quality of services (QoS) so far were limited only either for the network itself or for the end system, But, recently it is becoming more important to have the seamless end-to-end QoS support to meet the networked multimedia service requirements This paper proposes the QoS based resource management architecture which supports the large scale distributed systems under heterogeneous environment. The architecture introduces a couple of key concepts such as abstractions and algorithms. Abstractions capture the three perspectivest found in all systems: application, resource, and system, on the ofter hand algorithms manage system resources based on information in the three abstractions. We also explain the on-line resource management flow as well as the benefit function which specifies the level of benefit accrued to the application user as a function of the level of service provided by the system. At the end of the paper, the QoS based resource management applied to the tele-seminar application is described to show its practical utilization.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.185-196
• /
• 2012

The fish community within the lake and 5 tributaries of Lake Chungju in spring and autumn, 2009 was surveyed. In this study, the total 128,506 individuals were collected belonging to 11 families 29 genera 34 species. The most dominant species was Squalidus japonicus coreanus that account for 91.6% of population and 49% of biomass of fish community. In the point of population, dominant species were small-sized species, which became the prey of big-sized predatory species. In the point of biomass, dominant species were predatory species which were large-sized. The most dominant species in lacustrine area was S. japonicus coreanus which accounted for 92.2% of total population and 49.1% of total biomass. The most dominant species of tributary streams was Tridentiger brevispinis which accounted for 66.4% of total population and 55.1% of total biomass. The site of C3 in lacustrine area and Dongdal-cheon in tributary streams collected the most number of species. Through ecological health evaluation of five tributary streams using 8 metric index of biological integrity (IBI) model, two streams (Dongdal-cheon, Kwang-cheon were evaluated as, "B", "good" condition, and Jangsung-cheon obtained grade C indicating "Fair" condition, Jecheon-cheon obtained grade D indicating "Poor" condition based on IBI model. Lepomis macrochirus which was designated as a domestic ecosystem-disturbing alien species with wide food niche have shown tendency to increase the number of individuals since 1991 indicating the adverse effect on not only fish community but also aquatic ecosystem food web of Lake Chungju.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.73-81
• /
• 2009

Casing leak tests using three kinds of static seals are performed by simulating test section for a 75 ton thrust class turbopump under ambient and cryogenic temperature environment. As results of application of Conical, PTFE, and C static seals to leak tests, even though they all work in normal temperature condition, only the PTFE and C static seals show good sealing performance in cryogenic condition. However, the Conical static seal fails because of the different thermal expansion rates due to the use of different materials in a LOX pump. It is found that unlike the PTFE and C static seals with sealing surfaces in axial direction, the sealing surface of the Conical static seal is in radial direction that may cause leak when the casings thermally shrink in radial direction. Especially, the C static seal reveals excellent sealing performance even for a used seal.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.354-361
• /
• 2020

The term "articles for ship" is a general term for all relevant mechanical accessories (SPARE) and consumable materials (STORE) commonly used in ships. Ships commonly are at sea, so it is difficult to respond rapidly to the demand for them in an emergency situation. In particular, it is more difficult to determine the boarding location of tramper ships as it is more difficult to predict the next sailing route in advance. The purpose of this study was to identify the important factors to be considered in determining the boarding location of tramper ships through a survey of each ship owner and ship management company. This valuable information on the proposed supply procedures for each country and port, would be an efficient way to supply articles for ships.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.2
• /
• pp.23-30
• /
• 2007

This study attempts to propose an appropriate method of using digital medical imaging equipments, by studying the effects of automatic exposure control(AEC), grid ratio and the change of radiography distance on the patient dose and detertor acquisition dose during the procedure of acquiring image through a digital medical imaging detector. The change of dose following the change of grid ratio's exposure and radiography distance was measured, by using an abdominal phantom organized with tissue equivalent materials in an amorphous silicon thin film transistor detecter installed with AWC. The case to use grid ratio 12 : 1, focal distance 180cm to radiography distance 110cm in AEC, the patient dose increased rather when we used grid ration 10 : 1, focal distance 110cm. When AEC was not used,the dose necessary for image acquisition decreased as the grid ratio became higher and the distance became further. but detector acquisition dose was not reduced when in applied AEC. When purchasing digiral medical imaging equipments, optional items such as AEC and grid shall be accurately selected to satisfy the use of the equipments. Radiography error made by radiation technologist and unnenessary patient dose can be reduced by selecting equipments with a radiography distance marker equipment when it did not apply AEC. These equipments can also be helpful in maintaining high imaging quality, one of the merits of digital detectors.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.205-210
• /
• 2007

A LOX pump rotordynamic design was performed for a 75 ton thrust liquid rocket engine. Axial positions of an inducer, an impeller and bearings on a shaft are decided on the basis of the experience achieved by previously developed turbopump which has the similar layout. The result of pump hydraulic design was reflected in the present study to decide axial length of the inducer and impeller. A distance from the rear bearing to the impeller was considered as a design parameter for load distribution of the bearings. Asynchronous eigenvalue analysis was performed as a function of rotating speeds and bearing stiffness to investigate critical speed of the LOX pump. From the numerical analysis, it is found that the LOX pump with the proper bearing loads safely operates as a sub-critical rotor of which critical speed is high enough compared to the operating speed 11,000 rpm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.688-694
• /
• 2008

A rotordynamic analysis is performed for a high thrust class liquid rocket engine turbopump considering the dynamic characteristics of ball bearings and pump noncontact seals. Complex eigenvalue problems are solved to predict the rotating natural frequencies and damping ratios as a function of rotating speeds. Synchronous rotor mass unbalance response and time transient response analyses are also performed to figure out the rotor critical speed and the onset speed of instability. From the numerical analysis, it is found that the rear bearing stiffness is most important parameter for the critical speed and instability because the 1st mode is turbine side shaft bending mode. The pump seal effect on the critical speed is enlarged as the rear bearing stiffness decreases and the front bearing stiffness increases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1935-1942
• /
• 2017

Recently, a compression algorithm is widely used as a method for compressing geographic information data. However, such a compression algorithm has a problem that the continuity of the map data is insufficient to actually apply it to the geographic information data compression, and the compression rate is lowered because it can not be compressed into a single data. Therefore, in this paper, we have designed and implemented a Run-Length / Byte-Packing compression algorithm that enables compression of geographic information by combining the advantages of compression algorithms and improves compression and restoration speed. As a result of evaluating the implemented algorithm, it was confirmed that the proposed algorithm improved about 5% on average compared with the existing compression algorithm, and it was confirmed that the compression rate and the restoration speed were improved.

• The KIPS Transactions:PartB
• /
• v.14B no.4
• /
• pp.281-286
• /
• 2007

This paper proposes an intelligent context awareness middleware(ICAM) for Ubiquitous Computing Environment. In this paper we have researched about the context awareness middleware. The ICAM model is based on ontology that efficiently manages analyses and learns about various context information and can provide intelligent services that satisfy the human requirements. Therefore, various intelligent services will improve user's life environment. We also describe the current implementation of the ICAM for service adaptation based on fuzzy inference that help applications to adapt their ubiquitous computing environments according to rapidly changing. For this, after defining the requirements specifications of ICAM, we have researched the inferred processes for the higher level of context awareness. The Fuzzy Theory has been used in process of inferences, and showed constructing the model through the service process. Also, the proposed fuzzy inferences has been applied to smart Jacky, and after inferring the fuzzy values according to the change of temperature, showed the adaptability of Smart Jacky according to the change of surroundings like temperature as showing the optimal value of status.