• Journal of Embryo Transfer
• /
• v.22 no.3
• /
• pp.191-194
• /
• 2007

The purpose of the present study was to set up basic information of size and status of ovaries by using ultrasonography to retrieve in vivo matured oocytes with ovum pick- up method. Ovaries were collected from the abattoir in Jeju in May and June which is breeding season. When the size of ovaries on ultrasonography was compared with real size measured by caliper, no significant difference was shown (p<0.05). The number of preovulatory follicles (>21mm) was investigated with ultrasonography and naked eyes. Ultrasonography group had 0.83 preovulatory follicles per ovary and naked-eye group had 0.75 preovulatory follicle per ovary and their average size was 2.86 cm and 2.34 cm, respectively. The average number of follicle was 4.25 with ultrasonography and 4.38 with naked eyes. There was no significant difference considering the size of follicle and number of follicle between ultrasonography and actual size except for the size of preovulatory follicle, suggesting that information of ultrasonography is able to use for OPU or other reproductive technology of mare.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.431-439
• /
• 2016

This paper dealt with contents of the quality evaluation method of lattice girder utilizing non-destructive method. Quality evaluation of ordinary lattice girder is performed through the tensile strength test of structural steel and visual inspection. The tensile strength test of structural steel is performed by collecting samples of lattice girder brought into the site, during which lattice girder must be damaged to obtain sample. In addition to such disadvantage, tensile strength tester is not available at the site in most cases, requiring an inconvenient service from test certification agency. In addition, it is substituted by mile sheet issued during the production of structural steel, which inevitably lacks reliability. Furthermore, visual inspection at the site entails a problem of lack of reliability, thereby requiring a method of easily and quickly evaluating the quality of lattice girder without damaging the material. Accordingly, this study comparatively analyzed the yield strength of tensile strength test and the yield strength of instrumented indentation test with same sample. The test results ensured over 95% precision level for the instrumented indentation test, based on which a quality evaluation method based on instrumented indentation test that allowed onsite direct quality evaluation is proposed.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.1
• /
• pp.11-30
• /
• 1984

This study was executed to offer the basical data needed to the plywood industry as examining on the wood characteristics of veneer species that grow in Korea. According to the aggravation of log import from foreign countries caused by the gradual exhaustion of wood resources in recent years, the study on wood characteristics of veneer species growing in Korea should be carried out preferentially in promotion of the domestic timber utilization and development of it's processing technique for plywood industry. 50 commercial veneer species in this study were selected from 33 genuses, and general macroseopical wood characteristics for them were examined and described by the species. And also keys for the identification based on gross features were briefly prepared and presented by gymnosperm and angiosperm respectively.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2022

The general non-destructive inspection method for anchor bolts in Korea applies visual inspection and hammering inspection, but it is difficult to check corrosion or fatigue cracks of anchor bolts in the part included in the foundation or in the part where the nut and base plate are installed. In reality, objective investigation is difficult because inspection is affected by the surrounding environment and individual differences, so it is necessary to develop non-destructive inspection technology that can quantitatively estimate these defects. Inspection of the anchor bolts of domestic road facilities is carried out by visual inspection, and since the importance of anchor bolts such as bridge bearings and fall prevention facilities is high, the life span of bridges is extended through preventive maintenance by developing non-destructive testing technology along with existing inspection methods. Through the development of this technology, non-destructive testing of anchor bolts is performed and as a technology capable of preemptive/active maintenance of anchor bolts for road facilities, practical use is urgently needed. In this paper, the possibility of detecting defects in anchor bolts such as corrosion and cracks and reliability were experimentally verified by applying the ultrasonic test among non-destructive inspection techniques. When the technology development is completed, it is expected that it will be possible to realize preemptive/active maintenance of anchor bolts by securing source technology for improving inspection reliability.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.531-537
• /
• 2000

The simple microgel electrophoresis of single cells, a 'comet assay', on fruit seeds enabled the rapid identification of irradiated fruits by comparing the intact non-irradiated cells and the damaged cells of irradiated fruits. Grapes and plums were irradiated with 0.1, 0.5, 0.7, 1.0 kGy and strawberries, peaches, apples, and nectarines were irradiated with only 1.0 kGy. Seeds were isolated, crushed, and the suspended cells were embedded in an agarose layer. After lysis of the cells, they were subjected to microgel electrophoresis for 2 minutes, and then stained. The DNA radiation-induced fragmentation of all the fruits stretched and migrated out of the cells forming a tail toward the anode giving the appearance of a comet, while the undamaged cells appeared as intact nuclei without tails. Grape and plum seeds irradiated at 0.5 kGy and higher showed significant increases in tail length. With increasing the irradiation doses, longer extention of the DNA from the nucleus toward the anode was observed. Strawberry, peach, apple, and nectarine seeds irradiated with 1.0 kGy also showed the longer tails than non-irradiated ones. DNA comet assay as a rapid and inexpensive screening technique could be an officially validated method for the detection of irradiated fruits.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.12
• /
• pp.27-35
• /
• 2009

KICT (Korea Institute of Construction and Technology) and KISTEC (Korea Infrastructure Safety and Technology Corporation) have been carrying out inventory survey on cut slopes along national roads since 2006. Unlike precision safety check, cut slope inventory survey is a simple check about cut slope's characteristics with the naked eye to collect the data base of slope maintenance. Inventory survey is classified into general status, cut slope characteristics and inspector opinions. The inventory data are analyzed to identify dangerous slopes and decide a safety ranking. In this paper, we performed a correlation analysis using SPSS (ver.15) about the 10,461 cut slope inventory data which are collected in Kangwondo and Chungcheongdo from 2006 to 2008. We calculated the correlation coefficient between cut slope inventory data and the danger score derived from the data. And we evaluated cut slope inventory data which have the more influence on the danger degree of cut slope. According to results of correlation analysis, we found that inventory data influencing cut slope danger degree are stuck and fallen rock, orientation of discontinuity and angle of upper slope. And these data are slightly different by regionally. Later on, if inventory research is finished, we will understand regional characteristics of cut slopes.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.389-396
• /
• 1994

Background : The two most important purposes of fiberoptic bronchoscopy in lung cancer patients are obtaining tissue diagnosis and staging. The direct sign of lung cancer on FOB includes visible tumor, with smooth or nodular surface, with or without necrosis and infiltration. Variant cell types of lung cancer have their characteristic biological behaviors respectively. For example, squamous cell carcinoma grows slowly, invades locally and has easy necrosis resulting in cavitation, whereas adenocarcinoma shows early metastasis, small cell carcinoma shows rapid growth and higher early metastasis rate. Based on this, it could be hypothesized that each cell type may have characteristic bronchoscopic finding. Method : To answer this question, we reviewed 106 cases which were diagnosed as primary lung cancer and had bronchoscopically visible specific cancerous lesions. Results : The results were as follows. 1) Squamous cell carcinoma accounted for 66 cases(62.2%), adenocarcinoma 15 cases(14.2%), large cell carcinoma 3 cases(2.8%). 2) The endobronchial tumor lesion was arbitrarily classified into 5 types according to gross characteristics. Type A, multilobulating mass with necrosis, accounted for 24.5%, type B, multilobulating mass without necrosis, 25.5%, type C, round beefy mass, 9.4%, type D, infiltration with mucosal irregularity, 6.6%, and type E, infiltration without mucosal irregularity, 34%. 3) The analysis of correlation between endobronchial tumor pattern and specific cell type revealed that squamous cell carcinoma had relation with the morphologic type B and small cell carcinoma had relation with the morphologic type E, but adenocarcinoma had no preponderance in morphologic type. The gross appearance had influence on the diagnostic yields of biopsies and the diagnostic yields of lobulating mass types(type A, B) were higher than those of other types. Conclusion : From the above observations, it could be concluded that squamous cell carcinoma and small cell carcinoma have relations with specific types of bronchoscopic morphology, but not the case in adenocarcinoma.

• Korean journal of applied entomology
• /
• v.56 no.2
• /
• pp.135-145
• /
• 2017

A sampling survey was conducted at three reservoirs of Junam wetland ($6.02km^2$) in Korea to identify the wetland insect fauna along with their dominance, diversity, richness and evenness. Methods of monitoring were visual inspection and sweeping in 2010, Malaise trapping in 2011, light trapping and pitfall trapping in 2012. In total, 9,269 individuals (36.3% coleopterans, 21.3% lepidopterans and 13.9% odonates) were collected, belonging to 574 species, 141 families and 14 orders. For the number of species, lepidopterans shared the highest (31.2%), followed by coleopterans (28.0%) and hemipterans (12.9%). Dominant species were Enochrus simulans (Coleoptera) (7.9% of total individuals) followed by Hydaticus grammicus (Coleoptera) (4.3%), Galerucella nipponensis (Coleoptera) (4.1%), Elophila interruptalis (Lepidoptera) (3.1%) and Apis mellifera (Hymenoptera) (2.2%). Total counts of coleopterans, lepidopterans and odonates in the three reservoirs were quite high, but the counts were not significantly different among the reservoirs. Insect diversity index (H') and richness index (RI) of the Junam wetland were 5.04 and 59.10, respectively.

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.12001-12049
• /
• 2004

암석의 풍화과정은 화학적인 변질, 물리적인 분해 및 생물학적인 작용으로 나뉘어 진다. 풍화에 영향을 주는 요소는 기후, 조성광물의 종류 및 구조, 절리와 단층, 열수변질작용과 광화작용, 염기성 및 산성암맥과 지형 등이다. 또한 암석의 풍화는 성인에 따라 다양한 양상으로 진행되는데 이는 암석을 이루고 있는 각각 광물들이 열역학적인 반응경로가 서로 다르고, 이에 수반되는 물리적인 풍화진행속도가 차이가 있으며, 암석의 균질성, 투수성 등이 암종별로 다양하기 때문이다. 현장에서 암석의 풍화정도는 조성광물의 변질과 분해정도를 육안 등으로 정성적으로 판단하고 분류하는 것이 일반적이다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.171-176
• /
• 2002

이 논문은 MVR(Machinery Vapor Recompressor) Impeller Blade의 파손으로 발생한 사고원인 조사Um 관한 것이다 MVR의 고장의 원인을 밝히기 위해서 육안 분석(visual examination), 실체현미경 분석(Stereoscopic examination), SEM 분석 (SEM examination)을 한 결과 주조결함으로 인한 Surface Crack이 장기간 지속되어 Initial Crack이 생성된 뒤에 이 부위에 응력이 집중되면서 Fatigue Crack이 임계 Crack 길이까지 진행되었다. 여기에 Impeller 회전속도의 상승으로 인한 과부하가 부가되어 MVR의 Blade가 파손된 것을 알 수 있었다.(중략)