• Journal of Welding and Joining
• /
• v.14 no.2
• /
• pp.28-35
• /
• 1996

플라즈마에 의한 표면경화법(이하 PTA 육성용접이라고 함)은 개발된 이후 필요한 변수가 너무 많아 오랫동안 폭넓게 적용이 되지 못하고 있었다. 따라서 아주 우수한 코팅 품질을 필요로 하거나 재료측면에서 다른 방법을 사용할 수 없는 경우에 만 적용이 되어왔다. 그리고 경제성보다는 안정성이 우선적으로 보장 되어야 하는 경우, 예를 들면, 핵시설물, 화학설비 또한 엔진설비와 같은 곳에 사용이 되었다. 그 러나 최근에 들어서 특별히 microprocessor와 제어기술의 적용이 적은 비용으로도 가능해지면서 새로운 장치가 개발되었고, 많은 연구에 의하여 코팅의 특성에 미치는 영향을 파악하게 되므로써 PTA 육성용접이 신뢰성이 있으며 다른 육성방법에 비해서 우수한 공정으로 자리를 잡게 되었다. 한편 PTA 육성용접은 낮은 dilution, 좁은 열 영향부 그리고 상대적으로 높은 적층율의 특성이 있어 큰 부피를 코팅하거나 중요한 부품에 적용하기에 적합하다. PTA 장치가 반자동 또는 완전 자동화되면서 상대적으로 운용이 쉬워져 이러한 적용성은 더욱 확대되고 있다. PTA 육성용접은 Table 1에서 보는 바와 같이 다른 표면 경화법에 비하여 투자비용은 많이 들더라도 그 특성에 있 어서는 우수하다고 할 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5743-5747
• /
• 2015

In this study, Fe-based bulk amorphous alloy powder manufactured using gas atomization fabrication was used for laser welding. the fracture behavior of welding layer were analyzed. Tensile test results show that the destruction occurred immediately after the elastic deformation, After plastic deformation of the substrate, the destruction occurred. The actual maximum tensile strength of the welding layer and the substrate are 959.9MPa and 220.4MPa. welding layer were each $485.5{\pm}21$ and $197.4{\pm}14$ to the substrate and the actual microhardness, The welding layer has very high hardness. The welding layer showed a very weak fine acicular structure. The base material was shown in the micro structure appear a coarse grain. SEM observations of the fracture after the tensile test. Fracture morphology of the base metal and the welding layer showed ductile fracture and brittle fracture, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.446-452
• /
• 2016

Recently, heat resistant super alloys (which are wear-resistant, corrosion-resistant, and heat-resistant), have been used as the basic structural material in offshore and petrochemical plants. On the other hand, making valves from very expensive, high heat-resistant alloys increases the production cost and decreases its market competitiveness. To solve these problems, the technique of overlaying only those that flow on the fluid has been used as an effective method. Nevertheless, because the former technique of overlaying the ball is performed manually, it takes too much time and perfect welding is difficult to perform. To solve this problem, this study developed a robot automation system that can make uniformly overlay welding of the ball for ball-valves. The system consists of a 6-axis welding robot with a welding torch and additional 2 axes for the rotation of positioner, the controller, and a robot path OLP (Off-Line Programming). The CAD drawing data was entered in the Off-line program to obtain the robot teaching point and drive source. Overlay welding paths were implemented using Matlab. Through an automated overlaying system that implemented the OLP, the productivity rose 2.58 times, as the amount of time required for work decreased from 88 hours to 41 hours.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.91-93
• /
• 2007

• Proceedings of the KWS Conference
• /
• 1992.04a
• /
• pp.51-54
• /
• 1992

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.73-78
• /
• 2016

In this study, GTAW was carried out on austenitic STS316 stainless steel. Overlay welding with the stellite-base filler metal was implemented using a double torch. The response variable was calculated on the measured Vickers hardness for process optimization using the Taguchi method and its response variable was then analyzed about effect on overlay welding characteristics. The optimal process design by the Taguchi method is extremely effective in the overlay welding process for the multiple response variables. In addition, the effects of contribution rate about each response variable was analyzed easily. The conditions of the optimal process were 105A, 18V, pre-heat treatment at $200^{\circ}C$, and post weld heat treatment at $100^{\circ}C$. The Vickers hardness of the specimens produced under the optimal condition of GTAW by the double torch was 8.19% higher than that by a single torch.

• Proceedings of the KWS Conference
• /
• 1997.05a
• /
• pp.19-21
• /
• 1997

• Proceedings of the KWS Conference
• /
• 1998.10a
• /
• pp.250-252
• /
• 1998

• Proceedings of the KWS Conference
• /
• 1991.11a
• /
• pp.114-117
• /
• 1991

• Proceedings of the KWS Conference
• /
• 1999.10a
• /
• pp.205-207
• /
• 1999