• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.395-402
• /
• 2013

Since 2000, a large number of molecular studies have been conducted in Hexapoda with generating large amount of mitochondrial sequences. In this study, to review mitochondrial COI sequences and their molecular studies reported in Hexapoda from 2000 to 2009, 488 molecular studies conducted based on 58,323 COI sequences were categorized according to 26 orders and the positions of COI sequences (5', 3', and entire regions). The numbers of molecular studies in which the three regions utilized varied largely among the 26 orders; however, seven orders showed preferred positions of COI sequences in the researches: Diptera and Orthoptera revealed the largest number of studies in the 5' region; while, Coleoptera, Phthiraptera, Odonata, Phasmatodea, and Psocoptera, showed the largest number of studies in the 3' region. From comparing 84 molecular studies published before 2000, we observed the possibilities that molecular studies in Coleoptera, Diptera, Phthiraptera, and Phasmatodea from 2000 to 2009 had been followed classical studies using the positions of COI sequences well-known until 1999. This study provides useful information to understand the overall trends in COI sequence usages as well as molecular studies conducted from 2000 to 2009 in Hexapoda.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.193-196
• /
• 2008

This paper presents an experimental study to investigate enhanced performance of the masonry walls strengthened in shear and ductility using honeycomb steel mesh. The performance of masonry walls strengthened with steel mesh will compare with unreinforced masonry walls to show the performance of reinforced masonry walls. According to the experiment, it is expected that this system is effective to enhance the shear strength and ductility of the masonry walls.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.313-313
• /
• 2014

GaN계 물질 기반의 광 반도체는 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있고, 효율 증대를 위한 에피, 소자 구조 및 패키지 등의 많은 연구가 진행되고 있다. 특히, 투명 전극을 이용한 광 추출 효율의 증가에 대한 연구는 전체 외부양자효율을 증가시키는 중요한 기술로 각광을 받고 있다. 이러한 투명전극은 가시광 영역의 빛을 투과하면서도 전기 전도성을 갖는 기능성 박막 전극으로 산화인듐주석이 널리 사용되고 있으나 인듐 가격의 상승과 산화인듐주석 전극 자체의 크랙 특성으로 인하여 많은 문제점이 지적되고 있다. 이러한 문제를 극복하기 위하여 GaN계 발광 다이오드에 있어서 산화인듐주석 투명 전극의 대체 물질들에 대한 많은 연구들이 활발하게 이루어 지고 있다. 특히, 투명전극 층으로 사용되는 산화인듐주석 대체 박막으로 산화아연에 대한 연구가 각광을 받고 있는 실정이다. 또한, 발광 다이오드의 효율 증가를 위해 발광소자에 표면 요철 구조 형성과 나노구조체 형성 등 박막 표면의 구조 변화를 통한 광추출효율 향상에 대한 많은 연구가 진행되고 있다. 본 연구에서는 산화아연 박막을 투명전극으로 사용하였으며 광추출효율 향상을 위해 산화아연 투명전극에 패터닝을 형성하고, 그 위에 산화아연 나노막대를 형성하여 기존에 사용하던 산화아연 투명전극보다 우수한 추출효율 및 전류 퍼짐 향상 구조를 제안하고 이에 따른 LED 소자의 광추출효율 향상을 연구하였다. 금속유기화학증착법을 이용하여 c-면 사파이어 기판에 n-GaN, 5주기의 InGaN/GaN 다중양자우물 구조 및 p-GaN의 간단한 LED구조를 성장한 후, p-GaN층 상부에 원자층 증착법을 이용하여 투명전극인 산화아연 박막을 60 nm 두께로 증착하였다. 산화아연 투명전극만 증착한 LED-A와 이후 0.1% HCl을 이용한 습식식각을 통하여 산화아연 투명전극에 육각형 모양의 패턴을 형성한 LED-B, 그리고 LED-B위에 전기화학증착법을 이용하여 $1.0{\mu}m$의 산화아연 나노 막대를 증착한 LED-C를 제작하였다. LED-A, -B 및 -C에 대한 표면 구조는 SEM이미지를 통하여 확인한 바 산화아연의 육각 패턴과 그 상부에 산화아연의 나노막대가 잘 형성된 것을 확인하였다. I-L 분석으로부터 패턴이 형성되지 않은 산화아연 투명전극으로만 구성된 LED-A에 비하여 산화아연 투명 전극에 육각 패턴을 형성한 LED-B의 전계 발광 세기가 더욱 큰 것을 확인하였다. 또한, 육각 패턴에 산화아연 나노막대를 성장시켜 융합구조를 형성한 LED-C에서는 LED-B와 -A보다 더 큰 전계 발광세기를 확인할 수 있었다. 특히, 인가 전류가 고전류로 갈수록 LED-C의 발광세기가 더욱 강해지는 것으로 효율저하현상 또한 나노융합구조의 LED-C에서 확인할 수 있었다. 이는 기존 산화아연 투명전극에 육각형의 패턴 및 나노막대융합구조를 형성할 경우 전류퍼짐현상을 극대화 할 뿐 아니라, 추가적인 광추출효율 향상 효과에 의해 질화갈륨 기반LED 소자의 광효율이 증가된 것으로 판단된다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.4
• /
• pp.640-647
• /
• 1996

It has been found that an white precipitates at the inside surface is a common characteristics of soda-lime-silica glasses which have not undergone special surface treatments during hot weather season. In this study, the white deposits were examed using by solution method, surface analysis etc., and the dependence of weathering on the atmospheric condition was also investigated. As a results, the white precipitates on the glass surface was discorved as carbonates like $Na_2CO_3{\cdot}H_2O,CaCO_3$. Coming to atmosphere-dependence, it was shown that the glass made and stored at sea shore province had 3 times much severe weathering than that at land province.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.5
• /
• pp.168-173
• /
• 2020

To analyze and describe the behavior and mechanisms occurring in the thermal oxidation process of AlN, bulk AlN single crystals were thermally treated with different temperatures. As a result, it was confirmed that full-scale oxidation of bulk AlN and growth of Al-oxide occurred from the temperature of 800℃, which confirmed that the weight% of O elements tended to increase while the N elements decreased with increasing the temperature. In the case of thermal treatment at 900℃, the grown Al-oxides were merged with neighboring Al-oxides and began to form α-Al₂O₃ poly-crystals. During thermal treatment at the temperature of 1000℃, hexagonal pyramidal shaped poly-crystalline α-Al₂O₃ was clearly observed. Through the X-ray diffraction pattern analysis, the changes of surface crystal structure according to the temperature of bulk AlN were investigated in detail.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.9-18
• /
• 2021

The 5G communication system employs the millimeter wave with the extremely high frequency. Since the high frequency signal has the strong straightness, the beamforming technology based on the multiple base stations is required for services covering wide range. The beamformer needs the angle-of-arrival(AOA) information of the signal incident to the antenna, and it is generally estimated through the high resolution AOA estimation algorithm such as Multiple Signal Classification (MUSIC) or Estimation of Signal Parameters via Rotational Invariacne Technique (ESPRIT). Although various antenna array shapes can be employed for the beamformer, a single shape (square, circle, or hexagonal) is typically utilized. In this paper, we introduce a transmitting/receiving beamforming system based on the combined array antenna with square and circular shapes, which is proper to various frequency signals, and evaluate its performance. For evaluating the performance of the proposed beamforming system based on the combined array antenna, we implement the computer simulation employing various scenarios.