• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.41-49
• /
• 2012

The objective of this study is for development of the reference Korean female phantom, HDRK-Woman. The phantom was constructed by adjusting a Korean woman voxel phantom to the Reference Korean data. The Korean woman phantom had been developed based on the high-resolution color slice images obtained from an adult Korean female cadaver. There were a total of 39 organs including the 27 organs specified in ICRP 103 for effective dose calculation. The voxel resolution of the phantom was $1.976{\times}1.976{\times}2.0619\;mm^3$ and the voxel array size is $261{\times}109{\times}825$ in the x, y and z directions. Then, the voxel resolution was changed to $2.0351{\times}2.0351{\times}2.0747\;mm^3$ for adjustment of the height and total bone mass of the phantom to the Reference Korean data. Finally, the internal organs and tissue were adjusted using in-house software program developed for 3D volume adjustment of the organs and tissue. The effective dose values of HDRK phantoms were calculated for broad parallel photon beams using MCNPX Monte Carlo code and compared with those of ICRP phantoms.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.243-246
• /
• 2009

본 연구에서는 분자동역학 전산모사와 미시역학 모델을 이용하여 나노입자의 크기와 체적분율 변화가 나노복합재의 물성변화에 미치는 영향을 효과적으로 묘사할 수 있는 순차적 브리징 해석기법을 개발하였다. 나노 입자의 크기변화와 체적분율 변화에 따른 영률과 전단계수를 분자동역학 전산모사를 통해 예측한 후, 이를 연속체 모델에서 구현하기 위해 다중입자 모델을 적용하였다. 나노입자의 크기효과를 반영하기 위해 입자와 기지 사이에 유효계면을 추가적인 상으로 도입하였고, 체적분율 효과는 나노복합재를 둘러싸는 무한영역의 물성값을 통해 조절되도록 하였다. 유효계면과 무한영역의 물성을 입자의 반경과 체적분율의 함수로 근사한 후, 다양한 입자의 크기와 체적분율에서 나타나는 나노복합재의 물성변화를 예측하였다. 제안된 해석기법의 적용을 통해 분자동역학 전산모사 결과와 잘 일치하는 예측해를 효과적으로 얻을 수 있었다.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.275-286
• /
• 1998

The effective permeability and the representative element volume(REV) of fracture network model were evaluated based on the parameters such as permeability tensor, principal permeability and the direction of principal permeability. The effective permeability ranges between the harmonic mean and the arithmetic mean of the local permeabilities of subdivided blocks. From the numerical experiments, which were for investigating the influence of model volume on the variation of flux for the cubic models, it was found that the variation of flux became reduced as the model volume approached REV. The variation of groundwater flux into the tunnel in the fracture network model was mainly dependent on the ratio of the tunnel length to model size rather than REV. And it was found that groundwater flux into the tunnel was not completely consistent between the fracture network model and the equivalent porous media model, especially when the ratio of the tunnel length to model size is small.

• Progress in Medical Physics
• /
• v.13 no.2
• /
• pp.55-61
• /
• 2002

In this work, EPM (effective point of measurement) of parallel plate ionization chamber with three different spacing were investigated. If the plate separation is less than 2 mm one generally assumes that the effective point of measurement is just behind the front window of the parallel plate ionization chamber. For chamber with relatively large separation, such as the ones used for very accurate exposure measurements, this assumption breaks down and the EPM depends on plate separation and thickness of the front window. For parallel plate chambers, conventional theoretical analyses suggest that the EPM is the inner front wall and that it shifts towards the geometric centre of the chamber as the plate separation increases. The PP-IC (parallel plate ionization chamber) is fabricated using acrylic plate for the chamber medium and printed circuit board for electrical configuration. The various sizes of the sensitive volumes designed so far are 0.9, 1.9, and 3.1 cc. The gap between two electrodes ranges from 3, 6, and 10mm. Also the charge-to-voltage converter is designed to collect the electrons produced in the ionization chamber cavity. As the result of our experiment, the EPM shift was within 0.6 mm in photon beams and 0.4 mm to 2.5 mm in electron beams for the plate separation of 6 mm and 10 mm. EPM shifts towards the geometric center of the chamber as the plate separation increases.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.96-99
• /
• 1992

섬유강화 복합재료의 동탄성계수와 감쇠특성을 규명하기 위하여 랜덤하게 분포된 무한 실린더 형상의 산란체를 가진 매질내에서, 조화운동을 하는 압축 및 SV탄성파의 전파에 관하여 연구하였다. 단일 실린더에 대한 산란계수로부터 La의 준결정근사법을 이용하여 다중산란에 관한 이론을 유도하였고, 매질내에서의 파동전파 특성을 내포하는 분산관계식을 얻었다. 수치적으로 분산관계식의 해를 구함으로써 2 차원 유효체적강성, 횡방향 유효전단강성 및 각 파동의 전파에 따른 감쇠계수를 주파수와 체적비의 함수로서 제시하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.187-197
• /
• 2004

This paper presents the effects of cylinder shell elasticity on effective bulk modulus of oil $K_e$ in automotive hydraulic dampers. A theoretical model of cylinder shell bulk modulus $K_c$ based on the elasticity theory of thick-walled cylinder incorporating not only radial but longitudinal deformation is proposed. In a cylinder, values of $K_c$ by the new model and traditional models are computed and the discrepancies among them are discussed. In a twin-tube type automotive damper, the variation of $K_e$ under different pressure values in chambers of the damper cylinder, based on different theoretical models for $K_c$ is computed. Through these computations, it is shown that remarkable discrepancies in computed values of $K_e$ might occur according to the $K_e$ models in connection with $K_c$ models.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.343-348
• /
• 2009

In this study, an efficient sequential bridging method to characterize both the particle size effect and concentration effect on the mechanical properties of nanocomposites at high volume fraction is suggested through a molecular dynamics(MD) simulations and micromechanics of composites materials. The Young's modulus and the shear modulus of the nanocomposites at various particle radius and at 12% volume fraction were obtained from MD simulations and multi-inclusion model was adopted to describe both modulus in continuum model. In order to describe the particle size effect, an additional phase, effective interface, was adopted as characteristic phase and the non-dilute concentration effect which appears at 12% volume fraction was describe via the variation of the elastic modulus of the infinite medium. Both the elastic modulus of the interface and infinite medium were fitted into functions of particle radius for the applicability of the present bridging method at various particle radii. Using the present bridging method the elastic modulus of the nanocomposites was efficiently obtained with accuracy. In addition, the effect of the interface thickness and modulus on the elastic modulus of the nanocomposite was investigated.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.55-62
• /
• 2010

The settlements by liquefaction seldom occur uniformly because of soil homogeneity, however differential settlements are major cause of the damages to structures. From the past researches, author paid attention to the fact that stress history during undrained cyclic shear process affects greatly on the volumetric strains of the post-liquefaction. Therefore, the effect of the residual shear strain in cyclic shear process was examined in this study. The experiment apparatus based on strain control with volumetric strain control device was used for the study to investigate the effect of the residual strain on the relationship between volumetric strain and effective stress of clean and granite sandy soil. It could be seen an insignificant difference in the volumetric strain after liquefaction under various residual shear strain conditions in the case of clean sand. On the other hand, in granite sandy soil, the volumetric strain after liquefaction was small when the lower level of the residual shear strain was applied. And, the residual shear strain during cyclic shear affected the shape of the relation curve between effective stress and volumetric strain as well.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.21-29
• /
• 2012

Ground failure by liquefaction can occur not only during shaking but also as the result of the post-liquefaction process after an earthquake. During the process of ground deformation and failure, excess pore water pressure in soil is redistributed, which can then lead to changes in the effective stress of soils. Therefore, in order to provide a further understanding of the phenomenon, we have to estimate the properties of effective stress during the recompression process in post-liquefaction as well, not only the total amount of pore water drained. The primary objectives of this study are to determine and compare the recompression properties in the post-liquefaction process in terms of the relationship between volumetric strains and mean effective stresses under the various conditions of relative density and shear stress history. In all experimental cases, the volumetric strains increase greatly in the low effective stress level, almost to the zero zone, and granite soil, which has fine grains, undergoes gradual changes in the relationship between volumetric strains and mean effective stresses compared with fine sand. And, we can also find that recompression properties in the post-liquefaction process by cyclic loading depend highly on the dissipation energy and maximum shear strain, and this fact can be obtained in all cases regardless of the existence of fine content, relative density, and loading history. Especially, granite soil having fine grains can be defined uniformly in the relationship between dissipation energy and maximum volumetric strain, while fine sand cannot be so uniformly defined.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.57-67
• /
• 2007

Many researches have recently discussed about the film thickness as a good substitute or supplement for VMA or other volumetric criteria in the design procedure. Some researchers have not only proposed the specific number for the recommended film thickness, but also introduced the new calculation procedures or concepts. Each model (index model and the virtual model) has its own advantages and disadvantages in terms of the ability to account for the volumetric properties of the mixture. In this paper, the modified virtual model was proposed to combine advantages from both models. However, it cannot be disregarded the way to determine the appropriate particle shape factors for different sources and sizes of aggregates. In order to evaluate the different calculation methods, mixtures with two aggregate sources and eight gradations were designed based on the dominant aggregate size range (DASR) porosity concept. Superpave indirect tensile test (IDT) and asphalt pavement analyzer (AEA) test were used to describe the performance of mixtures. Test results indicated that the virtual model, which is the same to the modified virtual model for sphere 1:1 case, is better than the conventional standard model to define the range of the film thickness to have better performance of asphalt mixtures.