• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.180-188
• /
• 2006

This study was carried out to offer the raw data on the method of cultivation and ecological characteristic by systematical analysing habitat environment of Tulipa edulis that was expected as medicinal and ornamental resource. The habitat environment was that the altitude was 245 m, the aspect of south, the size of approximately $49\;m^2$, and there was analyzed that Tulipa edulis grew wild in the dryly sunny spot. The vascular plants were summarized as 62 taxa; 28 families, 59 genera, 50 species, 11 varieties and 1 forms, and the resource plants were classified that there were 23 taxa of ornamental plants(37.1%), 43 taxa of edible plants(69.4%), 34 taxa of medicinal plants(54.8%) and 29 taxa of others(46.8%). In the results of soil factors analysis, there showed that acidity was pH 4.9, organic matter content of 4.9%, available $P_{2}O_{5}$ of 3.6 mg/kg, exchangeable $K^+$ of $0.5\;cmol^{+}/kg$, exchangeable $Ca^{2+}$ of $3.0\;cmol^{+}/kg$, exchangeable $Mg^{2+}$ of $0.8\;cmol^{+}/kg$, cation exchange capacity(C.E.C) of $12.3\;cmol^{+}/kg$ and electrical conductivity(EC) of 0.3 dS/m. In the results of correlation analysis between soil factors, exchangeable $Ca^{2+}$ and C.E.C were highly correlative. The growth characteristics of Tulipa edulis were surveyed that height was 7.6 cm, leaf width of 0.6 cm, leaf length of 12.7 cm, flower width of 2.8 cm, peduncle of 5.4 cm and chlorophyll of $34.7\;{\mu}g\;mg^{-1}$. In the results of correlation analysis between growth characteristics, height and peduncle were highly correlative. In the results of correlation analysis between soil factors and growth characteristics, exchangeable $K^{+}$ and leaf length were high relativity but they were confirmed negative relation. In the results of growth model analysis, R-square of leaf width and exchangeable $K^{+}$ was some 86.4% and that of chlorophyll and exchangeable $K^{+}$ was some 83.7%.

• Journal of Mushroom
• /
• v.3 no.1
• /
• pp.1-23
• /
• 2005

World production of mushrooms has been increasing 10-20% every year. Recently, Pleurotus eryngii and P. nebrodensis are very popular as new mushroom species for cultivation. Two kinds of mushrooms, Gumji (Ganoderma) and Soji, were described in old book of Samguksagi (History of the three kingdoms; 1145) in Koryo-dynasty. Many kinds of mushrooms were also described in more than 16 kinds of old books during Chosun-dynasty in Korea. One hundred and sixty commercial strains of 25 species in mushrooms were distributed to cultivators. By the way, only 8 varieties of them have registered variety protection. Mushroom industry as important export products developed from 1960 to 1980. Production of mushrooms as food was 181,828 metric tons valued at 800 billion Korean won in 2003. Isolated and identified substances from mushrooms are promising antifungal, antiinflammatory, antitumor, antiviral (anti-HIV), antibacterial & antiparasitic, antidiabetic, immunomodulating, kidney tonic, hepatoprotective, nerve tonic, and sexual potentiator. These substances can also be used for blood pressure regulation and effective against cardiovascular disorders, hypocholesterolemia & hyperlipidemia, and chronicbronchitis. Mushroom products including pharmaceuticals, tonics, healthy beverages, functional biotransformants, and processed foods have also became available on the markets. Compost and feed can likewise be made from mushroom substrates after harvest. The mushroom industry is already one of the fastest growing investment sectors in Korea. By the way, there is a need to strain improvement for variety protection, advanced cultivation technology at low cost for growers, and control of demand and supply for marketing in order to more upgrade development of mushroom industry in the future.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.215-226
• /
• 2012

NASA MODIS GPP provides a useful tool to monitor global terrestrial vegetation productivity. Two major problems of NASA GPP in regional applications are coarse spatial resolution ($1.25^{\circ}{\times}1^{\circ}$) of DAO meteorological data and cloud contamination of MODIS FPAR product. In this study, we improved the NASA GPP by using enhanced input data of high spatial resolution (3 km${\times}$3 km) WRF meteorological data and cloud-corrected FPAR over the North Korea. The improved GPP was utilized to investigate characteristics of GPP interannual variation and spatial patterns from 2000 to 2008. The GPP varied from 645 to 863 $gC\;m^{-2}\;y^{-1}$ in 2000 and 2008, respectively. Mixed forest showed the highest GPP (1,076 $gC\;m^{-2}\;y^{-1}$). Compared to NASA GPP (790 $gC\;m^{-2}\;y^{-1}$);FPAR enhancement increased GPP (861) but utilization of WRF data decreased GPP (710). Enhancements of both FPAR and meteorological input resulted in GPP increase (809) and the improvement was the greatest for mixed forest regions (+10.2%). The improved GPP showed better spatial heterogeneity reflecting local topography due to high resolution WRF data. It is remarkable that the improved and NASA GPPs showed distinctly different interannual variations with each other. Our study indicates improvement of NASA GPP by enhancing input variables is necessary to monitor region-scale terrestrial vegetation productivity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.11
• /
• pp.1610-1616
• /
• 2016

This study aimed to establish an optimal extraction process and high performance liquid chromatography-ultraviolet (HPLC-UV) analytical method for determination of 3,5-dicaffeoylquinic acid (3,5-DCQA) as a part of materials standardization for the development of a xanthine oxidase inhibitor as a health functional food. The quantitative determination method of 3,5-DCQA as a marker compound was optimized by HPLC analysis using a Luna RP-18 column, and the correlation coefficient for the calibration curve showed good linearity of more than 0.9999 using a gradient eluent of water (1% acetic acid) and methanol as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 320 nm. The HPLC-UV method was applied successfully to quantification of the marker compound (3,5-DCQA) in Aster glehni extracts after validation of the method with linearity, accuracy, and precision. Ethanolic extracts of A. glehni (AGEs) were evaluated by reflux extraction at 70 and $80^{\circ}C$ with 30, 50, 70, and 80% ethanol for 3, 4, 5, and 6 h, respectively. Among AGEs, 70% AGE at $70^{\circ}C$ showed the highest content of 3,5-DCQA of $52.59{\pm}3.45mg/100g$ A. glehni. Furthermore, AGEs were analyzed for their inhibitory activities on uric acid production by the xanthine/xanthine oxidase system. The 70% AGE at $70^{\circ}C$ showed the most potent inhibitory activity with $IC_{50}$ values of $77.01{\pm}3.13{\sim}89.96{\pm}3.08{\mu}g/mL$. The results suggest that standardization of 3,5-DCQA in AGEs using HPLC-UV analysis would be an acceptable method for the development of health functional foods.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.1
• /
• pp.27-34
• /
• 2008

To effectively treat the domestic sewage that was produced on a small-scale in farming and fishing village in order to encourage an ecologically friendly environment, a small-scale sewage treatment apparatus using natural purification methods that consisted of an aerobic and an anaerobic plots were constructed. The efficiency of sewage treatment according to the sewage loading was investigated to obtain the optimum sewage loading in small-scale sewage treatment apparatus. Removal rate of pollutants according to the sewage loading were in the order of $150\;Lm^{-2}day^{-1}{\fallingdotseq}300\;Lm^{-2}day^{-1}>600\;Lm^{-2}day^{-1}$. Therefore, the optimum sewage loading was 300 L m-2 day-1. Under the optimum sewage loading, removal rate of BOD, $COD_{Mn}$, turbidity, T-N and T-P were 99, 94, 99, 49 and 89%, respectively. However, to satisfy the water quality standard in effluent in small-sclae sewage treatment apparatus for domestic sewage treatment, the low removal efficiency of T-N and T-P must be improved. So to improve the removal rate of T-N and T-P, the efficiency of sewage treatment according to the improved sewage treatment process such as, re-treatment at aerobic plot, anaerobic condition of aerobic plot, changing the filter media sizes and the depths in anaerobic plot, and also addition of oyster shells to filter media at anaerobic plot were investigated. In case of 150 cm depth in anaerobic plot with filter medium A (effectivity particle size 1.50 mm) and addition of oyster shells to filter media at anaerobic plot, removal rate of T-N and T-P in both plots were increased by 10 and 3%, and 14 and 7% in comparison with 100 cm depth in anaerobic plot with filter medium B(effectivity particle size 0.95 mm), respectively. The optimum improved sewage treatment process in small-scale sewage treatment apparatus were 150 cm depth in anaerobic plot with filter medium A and addition of oyster shells to filter media at anaerobic plot.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.647-657
• /
• 2015

To investigate a method for calculation of the heating load for environmental designs of horticultural facilities, measurements of total heating load, infiltration rate, and floor heat flux in a large-scale plastic greenhouse were analyzed comparatively with the calculation results. Effects of ground heat exchange and infiltration loss on the greenhouse heating load were examined. The ranges of the indoor and outdoor temperatures were $13.3{\pm}1.2^{\circ}C$ and $-9.4{\sim}+7.2^{\circ}C$ respectively during the experimental period. It was confirmed that the outdoor temperatures were valid in the range of the design temperatures for the greenhouse heating design in Korea. Average infiltration rate of the experimental greenhouse measured by a gas tracer method was $0.245h^{-1}$. Applying a constant ventilation heat transfer coefficient to the covering area of the greenhouse was found to have a methodological problem in the case of various sizes of greenhouses. Thus, it was considered that the method of using the volume and the infiltration rate of greenhouses was reasonable for the infiltration loss. Floor heat flux measured in the center of the greenhouse tended to increase toward negative slightly according to the differences between indoor and outdoor temperature. By contrast, floor heat flux measured at the side of the greenhouse tended to increase greatly into plus according to the temperature differences. Based on the measured results, a new calculation method for ground heat exchange was developed by adopting the concept of heat loss through the perimeter of greenhouses. The developed method coincided closely with the experimental result. Average transmission heat loss was shown to be directly proportional to the differences between indoor and outdoor temperature, but the average overall heat transfer coefficient tended to decrease. Thus, in calculating the transmission heat loss, the overall heat transfer coefficient must be selected based on design conditions. The overall heat transfer coefficient of the experimental greenhouse averaged $2.73W{\cdot}m^{-2}{\cdot}C^{-1}$, which represents a 60% heat savings rate compared with plastic greenhouses with a single covering. The total heating load included, transmission heat loss of 84.7~95.4%, infiltration loss of 4.4~9.5%, and ground heat exchange of -0.2~+6.3%. The transmission heat loss accounted for larger proportions in groups with low differences between indoor and outdoor temperature, whereas infiltration heat loss played the larger role in groups with high temperature differences. Ground heat exchange could either heighten or lessen the heating load, depending on the difference between indoor and outdoor temperature. Therefore, the selection of a reference temperature difference is important. Since infiltration loss takes on greater importance than ground heat exchange, measures for lessening the infiltration loss are required to conserve energy.

• Journal of the Korean Magnetics Society
• /
• v.17 no.3
• /
• pp.120-123
• /
• 2007

The typical double-barrier magnetic tunnel junction (DMTJ) structure examined in this paper consists of a Ta 45/Ru 9.5/IrMn 10/CoFe7/$AlO_x$/free layer/AlO/CoFe 7/IrMn 10/Ru 60 (nm). The free layer consists of an $Ni_{16}Fe_{62}Si_8B_{14}$ 7 nm, $Co_{90}Fe_{10}$ (fcc) 7 nm, or CoFe $t_1$/NiFeSiB $t_2$/CoFe $t_1$ layer in which the thicknesses $t_1$ and $t_2$ are varied. The DMTJ with an NiFeSiB-free layer had a tunneling magnetoresistance (TMR) of 28%, an area-resistance product (RA) of $86\;k{\Omega}{\mu}m^2$, a coercivity ($H_c$) of 11 Oe, and an interlayer coupling field ($H_i$) of 20 Oe. To improve the TMR ratio and RA, a DMTJ comprising an amorphous NiFeSiB layer that could partially substitute for the CoFe free layer was investigated. This hybrid DMTJ had a TMR of 30%, an RA of $68\;k{\Omega}{\mu}m^2$, and a of 11 Oe, but an increased of 37 Oe. We confirmed by atomic force microscopy and transmission electron microscopy that increased as the thickness of NiFeSiB decreased. When the amorphous NiFeSiB layer was thick, it was effective in retarding the columnar growth which usually induces a wavy interface. However, if the NiFeSiB layer was thin, the roughness was increased and became large because of the magnetostatic $N{\acute{e}}el$ coupling.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2001

Total upland area for cultivating the vegetable crops in the Alpine soils of Northeastern South Korea has been extending its limit to meet the increasing demand of vegetable food in recent decades. About 70% of these alpine soils are located in over 7% of the slope and most of vegetable crops have been cultivated intensively without practicing the best management systems. Thus, soil erosion and continuous cropping system have degenerated the soil fertility and shown detrimental effects on water quality. We initiated an intensive and extensive investigation to characterize the fertility problems encountered in these uplands. Objectives of this paper were to characterize the fertility status in the Alpine soils cultivated with vegetable crops for many years and to provide the recommendations for adequate soil management measures including fertilization and erosion control. Soils in general have good drainage with textural classes of loam or sandy loam. Their topographical characteristics tended to lead them to shallow plow layers, and the steepness of the terrain created erosion hazard. Of the soils examined, about 11% of uplands over 30% gradient was found in need of an urgent reforestation. A high content of gravel and firm hardness of soil attributed to inhibit the utilization of farm machinery and plant-root development. The average soil pH 5.6 was slightly low relative to pH 5.70 of the national average. Organic matter content was high compared with 2.0% of national average, but decreased with the prolonged cultivation periods. Available $P_2O_5$ concentration was unusually high due to the consequence of over dose application with chemical and organic fertilizers. Exchangeable cations as Ca, Mg, and K were appeared to be decreased in these regions with prolonging the cultivation periods. There were no significant differences in cation exchange capacity (CEC) and electrical conductivity (EC) among locations. Heavy metal contents were mostly lower than the threshold of danger level designated by Soil Environment Conservation Law of South Korea. Results indicated that a proper countermeasure and the best management practice should be immediately implemented to conserve the top soil and fertility in the Alpine regions.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.370-375
• /
• 2018

In order to promote the mechanized cultivation of perilla for seed, which has been increasing in cultivation area and production recently as demand increases according to the health-functional effects, we carried out this experiment to determine the optimum sowing time of perilla to minimize the seed loss at harvest and increase the yield. We used two different types of perilla varieties, 'Sodam(small-branch)' and 'Deulsaem(multi-branch)', and the sowing time was June 15, June 30, July 15 and August 1. As the sowing time is late, days of growth from sowing to flowering were shortened, and they were shortened from 14, 26 and 31~32 days on June 30, July 15 and August 1 as compared with June 15, respectively. And, the stem length and culm diameter were shortened or tapered and the number of nodes tended to decrease. The number of effective branch was 82%, 61% and 56% on June 30, July 15 and August 1 as compared with June 15, respectively. Accordingly, it seems to make against in securing the yield from July 15. And, the lowest cluster height was generally shorter as the sowing time is late, and the height was below 15cm on July 15 and August 1. It seems that this may work against the machine harvest. There was a high degree of significance between the sowing time and the yield. Although, the total yield was not statistically significant among June 15, June 30 and July 15, the ratio of shattering seed at harvest was in order of July 15, August 1(30.3%)> June 15(15.3%)> June 30(13.5%). Therefore, the net yield except for shattered seed was higher in order of June 30${\geq}$ June 15> July 15> August 1. This tendency was characteristic regardless of variety and sowing method. And, the protein content in perilla seed increased as the sowing time was delayed, and the content was the highest on August 1. The content of crude fat was relatively high on June 15 and July 15 in 'Sodam', and June 30 and July 15 in 'Deulsaem', respectively. And, the content of linolenic acid was found to be the highest on August 1. As a result, the optimal sowing time for machine harvest of perilla for seed is about June 30. At this time, it is determined that the sowing time is the most suitable to be advantageous in increasing the yield of perilla seed, while minimizing the seed loss due to the shattering at harvest.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.143-149
• /
• 2019

This study was conducted to investigate the graft-taking and growth of grafted cucumber seedlings as affected by light quality and blink cycle of LED modules. Four light quality treatments, namely blue, red, blue+red, white LED and four blink cycle levels of 5s/5s, 7s/3s, 9s/1s and control were provided to investigate the effect of lighting quality and blink cycle on the graft-taking and growth of grafted cucumber seedlings. Photoperiod for the control was 12/12 h. Photosynthetic photon flux, air temperature, and relative humidity for healing were maintained at $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, $25^{\circ}C$, and 90%, respectively. There was no significant difference in graft-taking of grafted cucumber seedlings according to light quality except the blue LED with the blink cycle of 5s/5s. Regardless of the blink cycle, there was no significant difference in graft-taking of cucumber seedlings healed under red, blue+red, and white LED modules. These results implied that the effects of light quality and blink cycle on the graft-taking were not significant. Differences in the leaf length, leaf area, and fresh weight of cucumber seedlings healed blue or red LED with the blink cycle of 9s/1s were found to be significant. There was no significant effect of the blink cycle on the growth of cucumber seedlings healed under white LED modules. The prices of white LED are gradually falling due to increased demand. Considering the manufacturing unit price of white LED modules, the cost savings of 10-15% are expected as compared to the conventional blue/red LED modules. Therefore, it was concluded that the use of white LED modules will be economical as an artificial lighting sources for healing of grafted seedlings.