• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1191-1196
• /
• 2009

온실가스 증가에 따른 미래 기후변화가 수자원에 미치는 영향을 평가하기 위하여 전구기후모델(AOGCM)의 기온과 강수 자료를 이용하여 한반도 지역에 대한 통계적 규모 상세화(statistical downsacaling, SDS) 기법을 개발하였다. 개발된 기법은 Cyclostationary Empirical Orthogonal Function (CSEOF) 분석과 회귀분석을 결합한 것으로 관측과 AOGCM 시계열의 통계적 상관성을 이용하고 있다. 20세기말(1973-2000) 동안의 광역규모의 기온(ECMWF)과 강수량(CMAP) 및 AOGCM의 기온과 강수량 자료에 통계적 상세화 기법을 적용하고 비교함으로써 이 기법의 유효성을 검증하였는데, 상세화된 기온과 강수량 자료는 관측된 계절변동성과 월변동성을 잘 모사하였다. 특히, 여름철 관측에 비해 저평가된 AOGCM의 강수량 크기와 변동성이 상세화를 통해 관측치에 근접하게 되었다. AOGCM의 미래 강수량 변화는 21세기 후반에 계절적으로 봄과 여름에 증가할 것을 예상되었다. 상세화된 AOGCM의 강수는 겨울을 제외한 모든 계절에서, 특히 여름철에 가장 많이 증가할 것으로 전망되었다. AOGCM의 미래 기온변화는 21세기 후반으로 갈수록 상승하며, 계절적으로 겨울철의 기온 상승폭이 더 클 것으로 전망되는데, AOGCM을 상세화한 결과에서는 겨울과 더불어 여름에도 기온 상승폭이 클 것으로 전망되었다. 개발된 기법은 역학적 결과와 관측과의 통계적 상관성을 이용하기 때문에 광역규모의 기후적 특성뿐만 아니라 한반도 지형 등 지역적 특성도 모두 반영함과 더불어 광역규모의 자료를 빠른 시간내에 효과적으로 상세화시킬 수 있는 장점도 지닌다. 한편 상세화에 사용된 CSEOF의 모드수 등에 따른 불확실성 등은 통계적 상세화 과정에 개선될 여지가 남아있음을 보여준다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1094-1102
• /
• 2010

In this paper, the problem of electromagnetic transmission via slits in a cavity inside conducting screen of finite thickness is considered for the case that the TE(to the slit axis) polarized plane wave is incident on the slit in conducting screen. Using the method of moments the variations of the transmitted power through the slits are obtained and compared with those computed from an equivalent circuit constructed using an equivalent slit admittance. It is found that the effective slit width of a narrow slit, at resonance, becomes $1/{\pi}$ wavelengths independently of the actual slit width. The transmission resonance phenomena in the proposed geometry are explained in connection with the variations of an equivalent admittance of the slit in the cavity.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.27-31
• /
• 2003

RF characteristics of CPW(coplanar waveguide) pattern with bonding pads used in flip-chip packaging of GaAs is studied in the frequency range of 1 GHz to 35 GHz. Simulation, fabrication and evaluation are performed for the proposed patterns. Measurement results show proposed patterns have similar properties of $S_{11}$below -31 dB and $S_{21}$ above -0.19 dB with typical CPW In addition RF properties are improved with the increase of width of ground line. This indicates CPW structure with bonding pads keeps RF characteristics of typical CPW.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.832-836
• /
• 2008

In this study, the electromagnetic coupling problem through narrow slit in an infinite conducting screen is considered for the case that the TM polarized plane wave is incident upon the slit. This study aims at explaining the mechanism of the maximum power transmission via the resonated slit using the equivalent circuit. It is shown that the transmitted power through the slit for the case of resonance corresponds to the power normally incident upon the conducting plane of the effective width 1/pi wavelengths, irrespective of the slit width. Some similarities between the maximum power transmissions observed in both the proposed structure and narrow slit in thick conducting screen are described from the viewpoint of equivalent circuit. In addition, it is found that, when the slit is resonated, the transmitted power equal to the scattered power.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.19-26
• /
• 2005

The objective of this study is to investigate the influence of process parameters, such as power of laser, cutting speed of laser and material thickness, on the practical cutting region and the kerfwidth fer the case of cutting of CSP IN sheet using high power Nd:YAC laser in continuous wave(CW) mode. In order to obtain the practical cutting region and the relationship between process parameters on the kerfwidth, several laser cutting experiments are carried out. The effective heat input is introduced to consider the influence of power and cutting speed of laser on the kerfwidth together. From the results of experiments, the allowable cutting region and the relationship between the effective heat input and kerfwidth fur the case of cutting of CSP 1N sheet using high power CW Nd:YAG laser have been obtained to improve the dimensionalaccuracyofthecutarea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.36-36
• /
• 2021

최근 기후변화로 인한 집중홍우 등으로 홍수 등 재난이 증가하고 있으며, 이를 과학적으로 조사하고 분석하기에는 공간적으로 범위가 넓다. 특히, 미계측유역은 자료를 수집하고 정량적으로 분석 및 예측하는 데에는 한계가 많은 실정이다. 따라서 본 연구에서는 위성영상 자료를 활용하여, 하천폭, 수면경사, 수위 등 자료를 추출하고, 이를 유량조사를 수행한 지점의 자료와 비교하여 수리 기하적 상관성을 분석하였다. 특히, 하도특성을 고려하여 중·하류로 구분하고 유량과 수리기하 학의 관계를 분석하였다. 위성영상 중 취득이 용이한 Sentinel 자료를 선별하여 수리특성인자를 추출하였다. 영상자료의 해상도가 20 m이며, 자료의 한계에 따른 하천폭, 경사, 수위에 대한 유효 기준을 제시하고 경사가 완만하고 하폭이 넓은 대하천에 적용하였다. 그리고, 하천수리인자 특성을 입력변수로 하는 유량을 추정하기 위한 회귀모형을 구축하고, 모의유량과 실측유량을 비교하여 그 적용성을 평가하였다. 개발된 모형은 규모가 유사한 시험유역을 미계측 유역으로 간주하여 평균제곱근오차(RMSE) 와 평균절대오차(MAE)를 이용하여 정확도를 추정하였다. 본 연구를 통해 주요하천의 수리기하 특성을 통계화하고 유량과의 특성을 도출하여 국내하천의 특성을 범주화 할 수 있었고, 미계측 유역에서의 유량을 원격탐사와 같은 간접적인 방법을 통해 추정하고 적용할 수 있을 것으로 기대된다.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.432-439
• /
• 2024

This paper introduces an enhanced Selective Harmonic Elimination (SHE) technique of a single-phase Cascaded H-Bridge (CHB) Multilevel Inverter (MLI) for improving the reliability and power quality of a second life battery energy storage system (ESS). The technique involves solving non-linear transcendental equations derived from Fourier series offline to determine the optimal switching angles for the proposed SHE-PWM implementation. These angles are then applied in real-time via a Look-Up Table (LUT). The Levenberg-Marquardt algorithm, an iterative method, is employed in MATLAB to solve the equations and obtain the switching angles. The effectiveness of the proposed method is validated using PLECS simulation software and is compared with other conventional PWM techniques for MLIs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.97-107
• /
• 2013

On the Staggered Crosswalks, pedestrians cross the crosswalks two times. This method can reduce the cycle, the vehicle delay and the walking distance by increasing the major direction of green time. The safety of pedestrians is also effective. This study suggests the warrant of the facilities of island width and length etc. by considering the road structure and pedestrians. Also this study suggests the standard of the safety through the accident analysis of Staggered crosswalks and General Crosswalks. In the results, accident rate of the Staggered Crosswalks 18.3(100 million vehicle-km) was lower than the accident rate of the General Crosswalks 28.3(100million vehicle-km). By understanding the start point of crossing of the Staggered Crosswalks, the analysis of the location and types of accident suggests the safety zone(spare space). The setting warrants of Staggered Crosswalks are 4 lane over the road and the 2 meter over sidewalk width of island. The minimum length of the Pedestrian island was doubled compared to the crosswalks width. And the maximum length was set by considering the wait time of the pedestrians.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.130-136
• /
• 2017

The present work is for an evaluation of tension behavior and surface deterioration of FRP Hybrid Bar due to UV exposure and freezing/thawing(F/T) actions. For the work, FRP Hybrid Bar is subjected to UV exposure test, then F/T test is performed successively to 180 cycles. In FRP Hybrid Bar, no significant surface deterioration is evaluated after UV exposure. Tension hardening performance, a unique engineering advantage of FRP Hybrid Bar, is still maintained after F/T test. The performance in FRP Hybrid Bar exposed to UV is still effective. FRP Hybrid Bar exposed to UV have almost similar tension behavior of FRP Hybrid Bar without UV exposure. Although F/T cycles increase to 180, steel rebar, FRP Hybrid Bar, and FRP Hybrid Bar exposed to UV show no significant changes in tension behavior. In the work, UV exposure and F/T actions are evaluated to have little negative effect on surface deterioration and tensile performance in FRP Hybrid Bar, however spalling of silica coating due to impact should be considered since it affects bonding strength to outer concrete.

• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.369-376
• /
• 1995

Black and White aerial photogrphs are much useful to obtain the information on the channel-bed fluctuation in the following aspects. 1. In the decision of river width, the linear regression formula between the value of aerial photograph interpretation and that of field surveying is Y=1.0+0.94X(the decision coefficient is $r^2=0.98$). Therefore, aerial photographs are proved effective for the measurement of river width. 2. Aerial photograph interpretation makes it possible to classify the plane channel and the deposits in river, and suggests the situation of the plane distribution of deposits, the size of channel and the course of channel formation. 3. The periodical channel situation can be figured out through the interpretation of aerial photographs pictured in different times. Also, the comparing and analyzing each interpretated information can be able to guess the course of the variation of channel influencing powerfully channel - bed fluctuation. 4. The microtopographic map of river can be made through the decision of river with, the interpretation of the plane shape of channel - bed and the analysis of variation of channel. On the basis of this map, the plane analysis of deposit is possible.