• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.44-50
• /
• 2016

W-대역 잡음온도 표준 확립에 필요한 잡음전력 수신기인 라디오미터를 제작하고, 성능을 평가하였다. 제작된 라디오미터를 사용하여 기준 상온 및 저온잡음원, 그리고 피측정잡음원의 잡음전력을 각각 측정하고, 라디오미터 식을 사용하여 피측정잡음원의 잡음온도를 구하였다. 결과에 대한 측정불확도를 평가하고, 국외 측정표준기관인 영국 NPL의 측정결과와 비교함으로써 측정의 유효성을 검증하였다. 확립된 W-대역 잡음온도 측정표준을 국내 산학연에 보급함으로써 자동차, 항공, 우주, 국방, 보안 등 다양한 분야의 잡음측정에 있어서 측정의 신뢰성을 높이는데 기여하게 될 것이다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.268-276
• /
• 2001

A numerical model for the thermal response analysis of concrete structures is suggested. The model includes the stress-strain relationship, constitutive relationship, and multiaxial failure criteria at elevated temperature conditions. Modified Saenz's model was used to describe the stress-strain relationship at high temperatures. Concrete subjected to elevated temperatures undergoes rapid strain increase and dimensional instability. In order to explain those changes in mechanical properties, a constitutive model of concrete subjected to elevated temperature is proposed. The model consists of four strain components; free thermal creep strain, stress-induced (mechanical) strain, thermal creep strain, and transient strain due to moisture effects. The failure model employs modified Drucker-Prager model in order to describe the temperature dependent multiaxial failure criteria. Some numerical analyses are performed and compared with the experimental results to verify the proposed model. According to the comparison, the suggested material model gives reliable analytical results.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.707-713
• /
• 1998

The influence of plasma carburizing process on the surface hardness of SCM415 low-alloy steel (0.15% C) was investigated under the various process conditions of gas composition. gas pressure, plasma current density. temperature and time. The effective case depth was found to depend on the amount of methan gas containing carbon. thus the deepest case depth and the uniform hardeness were obtained with the 100% methan gas. The case depth increased with the plasma current density. The effective plasma carburizing temperature of SCM415 steel was found to be higher than 85$0^{\circ}C$, and the case depth was proportional to the square root of carburizing time under the same current density. The bending fatigue strength of the plasma carburized specimen is' higher than those of as- received specimen or reheat-quenched specimen.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.50-56
• /
• 2003

This research was performed to select an appropriate agent to extract preservative components from CCA-treated wood, and then to evaluate the effect of reagent concentration, extracting temperature, and extracting time on the removal of chrome, copper, and arsenic from treated wood. Hydrogen peroxide was selected as the best extracting agent when considered extraction yield as well as use and environmental safety. Its extraction yield was dependent on extracting variables (temperature, concentration, and time), and a highly significant interaction existed among variables. It should be possible to optimize extraction by manipulating these extracting variables. The results may suggest that the required temperature conditions for the reasonable removal of CCA components are at least above 40℃ because extracting time is too long at low temperature (20℃). Reagent concentrations for extracting at above 40℃ should be decided by considering the extracting time.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.126-135
• /
• 1995

Thermal cracks are occured when thermal stress due to the hydration of cement exceeds the tens~le strength of concrete. Since crackmg causes poor durability of concrete, the effect of ther ma1 cracking should be includod for the design and construction of massive concrete structures. In this study, an experiment is performed for the investigation of time dependent thermal stress history. In order to evaluate thermal stress. two methods are employed. One 1s the evaluation method of thermal stress based on the measurement from embedment stram gauge with non-stress strain gauge and the other 1s based on the measurement from concrete stress gauge. As a result of this study, the value corrected by the former shows good agreement with the latter. The validity of the proposed method for the evaluation of thermal stress 1s explored.

• Korean journal of applied entomology
• /
• v.60 no.3
• /
• pp.277-286
• /
• 2021

The natural enemy was identified as a parasitic wasp, Binodoxys communis Gahan. B. communis taxonomically belongs to the family braconidae, subfamily aphidinae, and genera binodoxys. It develops normally at 17.5 to 32.5℃, and not at 35℃. Depending on the temperature, the longest development period of B. communis was 21.9 days at 17.5℃, and shortest was 6.46 days at 32.5℃. The effective accumulated temperature was 175.44 DD for females as well as males; however, the developmental threshold temperature was 10.87℃ and 10.74℃ for females and males, respectively. This parasitic wasp was found to prefer cotton aphids and soybean aphids as its prey.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.1-7
• /
• 2010

The device performances of accumulation-mode Pi-gate pMOSFETs with different fin widths have been characterized at high operating temperatures. The device fin height is 10nm and fin widths are 30nm, 40nm, and 50nm. The variation of the drain current, threshold voltage, subthreshold swing, effective mobility, and leakage current have been investigated as a function of operating temperatures. The drain current at high temperature is slightly larger than at room temperature. The variation of the threshold voltage as a function of the operating temperature is smaller than that of the inversion-mode MOSFETs. The effective mobility is decreased with the increase of operating temperature. It is observed that the effective mobility is enhanced as the fin width decreases.

• Journal of the KSME
• /
• v.26 no.5
• /
• pp.375-381
• /
• 1986

De-Laval 노즐에서 경계층 배제두께의 음수현상에 대하여 수학적 모델을 통한 수치 고찰 한 결과 배제두께 뿐만 아니라 다음과 같은 경계층의 특성을 알 수 있었다. (1)온도비($T_w/T_0$)가 작아질수록 경계층 두께가 상대적으로 커진다. (2)운동량두께의 변화도 단열 벽면이 아닌 경우에는, 비압축성(${\rho}=const$) 유체 보다. 온도비가 작을수록 항상 커진다. (3) 경계층 배제두께는 온도비가 작은 경우 음(―)의 값을 나타내고 있어, 유효유동 단면적의 확대 현상을 보이고 있다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.254-258
• /
• 1990

In order to investigate the effect of sowing dates on some agronomical characters and yield of corn in southern part of Korea. a field experiment was carried out at Gyeongnam Provincial Livestock Breeding Station in chinju. Single cross hybrid corn (cv. Suwon #19) was sown from April 13 to June 2 with five-day interval in 1984 and 1984. The relationship between herbage and grain yield and various meterological measurements was evaluated. As the sowing dates were delayed. the days from sowing to seedling emergence were shortened, as more closely affected by the soil temperature at seedling emergence. growth period and was dependent on precipitation and temperature during the growth period. Based on the relationship between herbege dry matter yield of corn and soil temperature at seedling emergence, the estimated critical sowing date for corn in the southern Korea was March 23${\pm}$3.6 days.

• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.123-128
• /
• 2012

We aimed to estimate the accumulated degree days required for the development of $Cloeon$ $dipterum$ (Ephemeroptera: Baetidae) in an experimental tub under field conditions from August 7 to October 10 in 2011. After 4 days in a tub setting, a dead female adult was found on the water surface at which oviposition had presumably occurred. Adults emerged from 39 days to 61 days after the oviposition date. The total number of emerged adults was 229, and the sex ratio (number of females : total population) was 0.45, although not statistically significant ($p$ >0.05). The males generally emerged earlier than females. Assuming that the basal temperature ($T_b$) value is $0^{\circ}C$, we estimated the number of accumulated degree days required for the development of $C.$ $dipterum$ to be $1,221.8{\pm}116.0$ DD (mean${\pm}$SD). Since the annual number of accumulated degree days in the reference wetland was measured to be 5,650.0 DD, we estimated that $C.$ $dipterum$ is multivoltine, with a maximum of 4 cohorts in 1 year in natural habitats.