• Title/Summary/Keyword: 유효간격

Search Result 271, Processing Time 0.031 seconds

Analysis of Effective Discharge for Hydraulic, Geomorphological Characteristics to Rivers with High Coefficients of River Regime (하상계수가 큰 하천의 수리적, 지형학적 특성에 따른 유효유량 분석)

  • Jang, Eun-Kyung;Kwon, Yong-Sung;Kim, Nam-Il;Ji, Un
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.409-413
    • /
    • 2011
  • 유효유량이란 수년에 걸쳐 연 유사량의 대부분을 이동시키는 유량으로 정의되며 유량-빈도분포곡선과 유사량 곡선을 이용하여 산정된다. 유효유량은 하도를 설계하거나 기존 하도의 안정성을 평가하는데 있어 기준유량이 될 수 있는 필수적인 요소이지만, 현재 국내의 경우 이에 대한 분석이 충분히 수행되지 않아 특정한 패턴을 도출하기 힘든 실정이다. 특히 우리나라의 하천은 연강수량의 약 70%가 여름철에 집중되는 기후적 특성의 영향으로 하상계수가 미국과 유럽에 비해 10에서 25배 크게 나타나 외국사례를 국내에 적용하는데 어려움이 있다. 따라서 본 연구에서는 구하도복원이 계획 또는 진행되어 유효유량 산정이 필수적이며 하상계수가 매우 큰 만경강, 청미천, 함평천을 대상하천으로 선정하여 유효 유량을 산정하고 수리적, 지형학적 특성과의 연관성을 분석하고자 한다. 유효유량을 계산하는 데 있어 가장 큰 영향을 미치는 요소는 유량빈도 간격 수와 유량빈도 간격의 설정이다. 따라서 본 연구에서는 유효유량 산정을 위한 유량 간격으로 산술등간격(Arithmeic Bin)과 로그간격(Logarithmic Bin)을 모두 사용하였으며 각각 간격수가 25개, 50개, 100개인 경우에 대해 유효유량을 계산하여 비교하였다. 산술등간격과 로그간격을 사용한 유효유량 산정결과 중 최대, 최소값을 제외한 나머지의 평균값을 각 대상하천의 유효유량으로 선정하였다. 수리적, 지형학적 특성에 따른 대상하천 분석 결과 하상계수가 클수록 유효유량이 크게 산정되는 것으로 나타났으며 하상 경사, 하상토의 중앙입경 크기와 비례하는 것으로 나타났다. 반면에 수심-하폭비와 사행도의 경우 유효유량과 반비례하는 것으로 나타났다.

  • PDF

Study on Effective Point of Measurement for Parallel Plate Type ionization Chamber with Different Spacing (평행평판형 이온함의 두 전극간의 간격 변화에 따른 유효측정점에 관한 연구)

  • 신교철;윤형근
    • Progress in Medical Physics
    • /
    • v.13 no.2
    • /
    • pp.55-61
    • /
    • 2002
  • In this work, EPM (effective point of measurement) of parallel plate ionization chamber with three different spacing were investigated. If the plate separation is less than 2 mm one generally assumes that the effective point of measurement is just behind the front window of the parallel plate ionization chamber. For chamber with relatively large separation, such as the ones used for very accurate exposure measurements, this assumption breaks down and the EPM depends on plate separation and thickness of the front window. For parallel plate chambers, conventional theoretical analyses suggest that the EPM is the inner front wall and that it shifts towards the geometric centre of the chamber as the plate separation increases. The PP-IC (parallel plate ionization chamber) is fabricated using acrylic plate for the chamber medium and printed circuit board for electrical configuration. The various sizes of the sensitive volumes designed so far are 0.9, 1.9, and 3.1 cc. The gap between two electrodes ranges from 3, 6, and 10mm. Also the charge-to-voltage converter is designed to collect the electrons produced in the ionization chamber cavity. As the result of our experiment, the EPM shift was within 0.6 mm in photon beams and 0.4 mm to 2.5 mm in electron beams for the plate separation of 6 mm and 10 mm. EPM shifts towards the geometric center of the chamber as the plate separation increases.

  • PDF

Mining Generalized Temporal Patterns in Temporal Databases (시간지원 데이터베이스에서의 시간 계층을 이용한 일반화된 패턴 정보 탐사)

  • 이강태;이준욱;남광우;류근호
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1998.10b
    • /
    • pp.232-233
    • /
    • 1998
  • 이 논문에서는 시간지원 데이터베이스를 대상으로 하여 시간 간격과 시간 위상을 지닌 데이터에서의 정보를 탐사한다. 그리고 시간지원 데이터베이스에서의 시간 정보 유형을 제시하고 이에 따라 탐사되는 패턴의 유형을 분류한다. 또한 시간에 대한 계층적 구조인 시간 계층을 도입하고 이를 이용하여 각 항목의 유효시간 정보를 일반화시킨다. 시간 계층에 의한 유효시간의 일반화에 있어서 발생하는 시간 정보 유형의 변화와 패턴 유형의 변화를 살펴본다. 그리고 시간 간격 변화에 따른 패턴 정보의 발견을 예를 들어 기술한다. 이 논문에서는 시간 계층을 이용하여 시간 간격을 변화시킬 경우 발견되는 새로운 유형의 패턴 지식을 탐사하고 이를 제시한다.

Bin Determination for the calculation at effective flow (At middle Nakdong River) (낙동강 중류 유효유량 산정을 위한 Bin 결정 기법 연구)

  • Hwang, Man-Ha;Yoon, Young-Ho;Kim, Kyung-Min;Son, Kwang-Ik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.522-522
    • /
    • 2012
  • 최근 각종 하천 개발 사업이 활발히 진행되면서 안정하도 평가가 활발히 이루어지고 있다. 안정하도 평가를 위해서는 흐름과 하천의 수리기하특성간의 관계를 연결시켜주는 기준유량이 필요한데 이러한 유량이 곧 유효유량이라 할 수 있다. 유효유량은 수년에 결쳐 연 유사량의 대부분을 이동시키는 유량의 평균값으로 정의되며, 적어도 일년에 한 번이나 두 번 또는 대부분의 경우 매년 여러번 발생하는 적당한 빈도의 유량규모에 의해 연 유사량의 대부분을 이동시키는 유량이다. 대표적인 유효유량 산정 프로그램인 Geo-tool은 유황곡선과 유사량 관계 곡선을 활용하여 유효유량을 계산한다. 프로그램에 입력하는 유량은 Bin 수와 지정하는 규칙에 따라 유량구간이 나뉜 후 각 구간별 평균유량에 대한 유사량을 산정한다. 이 때 산정된 구간별 유사량값과 이 구간의 유량이 발생한 일수를 산정함으로써 이 구간의 유량을 통해 발생한 연간 총유사량을 산정한다. 각 구간별 연간 총유사량으로부터 가장 많은 유사량을 이송시키는 구간에 해당되는 평균유량을 유효유량으로 선정하게 된다. 즉 유효유량은 유량범위 간격에 민감하게 반응하므로 Bin의 선정이 중요하다고 할 수 있다. 그러나 국내외에서 Bin 산정에 대한 명백한 기준이 없는 상황이므로 본 연구에서는 Arithmeic Bin과 Logarithmic Bin를 모두 사용하여 낙동강 중류 유효유량 산정에 가장 적합한 Bin의 수와 Bin 간격 산정 규칙을 제시하였다.

  • PDF

Resonance Phenomenon according to the relationship between Span Length of the Bridge and Effective Beating Interval of High-Speed Train (교량의 지간장과 고속전철하중 유효타격간격 사이의 관계에 따른 공진현상)

  • 김성일;곽종원;장승필
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.3 no.2
    • /
    • pp.67-76
    • /
    • 1999
  • Resonance of the bridge can be occurred with the coincidence between a natural frequency of the bridge and a crossing frequency of moving loads which is determined from the speed and effective beating interval of the vehicle. In case of the railway bridge, the effective beating interval of the vehicle is fixed under the passage of specific trains. In the present study, resonance and cancellation of the bridge subjected to moving high-speed train are analyzed with the variations of span length. A steel-concrete composite railway bridge is idealized by the combinations of plate elements and space frame elements. High-speed train is idealized with moving constant forces and a 3-dimensional full modelling. From analyzing dynamic responses of D.M.F of vertical displacement, maximum vertical acceleration of the slab, and end rotation according to the variations of span length of the bridge, design criteria of span length of the bridge which satisfies dynamic safety is discussed.

  • PDF

Evaluation of Shear Capacity According to Transverse Spacing of Wide Beam Shear Reinforced with Steel Plate with Openings (유공형 강판으로 전단보강된 넓은 보에서의 횡방향 보강 간격에 따른 전단성능 평가)

  • Choi, Jin Woong;Kim, Min Sook;Choi, Bong-Seob;Lee, Young Hak;Kim, Heecheul
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.28 no.3
    • /
    • pp.259-266
    • /
    • 2015
  • In this paper, transverse shear spacing and effective depth of wide beams were considered as parameters to evaluate the shear capacity of wide beam according to transverse spacing of steel plates with openings in experimental way. The eight specimens were composed of: five specimens of shear reinforced by steel plates with openings and three non-reinforced specimens. Crack, failure mode, strain and load-displacement curve of specimens were analysed. Shear contribution of shear reinforcement is evaluated and maximum transverse spacing of shear reinforcement was proposed. Shear strength of the specimen that reinforced with three stirrup legs was higher than shear strength of the specimen that reinforced with two stirrup legs. And as the effective depth increased, shear strength was increased.

Evaluation on Effective Width of Concrete Unfilled Composite Steel Grid Deck (콘크리트 비충전 강합성 바닥판의 유효폭 평가)

  • Park, Young Hoon;Lee, Seung Yong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.37 no.3
    • /
    • pp.521-529
    • /
    • 2017
  • In this study, analyzed the effective width of concrete unfilled composite steel grid deck which has different shear connector details from that of composite bridge. The effective width of concrete unfilled composite steel grid deck according to effective width calculation method, load size and main bearing bar spacing-span ratio was evaluated. As a result of analysis, it is analyzed that the effective width is calculated to be nearly equal to the actual effective width by idealizing the stress shape as a trapezoidal shape. In addition, shear hole penetration reinforcing bars applied to increase the shear strength is shown to increase the effective width. From the results of the analysis of the effective width according to main bearing bar spacing-span ratio, proposes the correction factor that can calculate the effective width ratio of the unfilled steel composite steel grid deck.

A Study on the Consolidation Analysis of Hydraulic Fills Applying Lateral Vacuum Consolidation Method (수평진공배수공법이 적용된 준설매립지반의 압밀 해석에 관한 연구)

  • Lee, Song;Kang, Myoung-Chan;Kim, Heung-Seok
    • Journal of the Korean Geotechnical Society
    • /
    • v.17 no.4
    • /
    • pp.209-220
    • /
    • 2001
  • 준설매립지반 표층강도증진을 위한 수평진공배수공법 적용시의 압밀현상 예측을 위한 연구를 수행하였다. 초연약지반에 수평배수재와 진공압을 이용하여 수평진공배수 공법을 적용할 경우, 배수재 부근에서 3차원적 배수특성과 넓은 범위의 유효응력의 변화, 지반의 압축성 및 투수성이 크게 변화하게 된다. 이를 위하여 3차원 배수특성과 다양한 경계조건, 부의 간극수압 발생을 통한 유효응력의 증가, 유효응력에 따른 압축성과 투수성의 비선형성을 포함할 수 있도록 기존의 3차원 압밀 지배방정식을 확장 유도하였고, 유효응력-간극비-투수계수의 관계를 누승형태의 함수로 표현하여 사용하였다. 해석기법의 타당성을 검증하기 위하여 실내에서 수행된 대형 토조실험 결과를 모델링하여 좋은 일치를 확인하였고, 이를 바탕으로 수평진공배수공법 적용시의 압밀효과에 대한 분석결과 드레인이 타설된 상부지반에서는 균등한 개량효과의 결과를, 하부의 미개량 지반에서는 자중압밀에 의한 압밀효과를 확인할 수 있었으며 배수재의 수평타설 간격에 따른 압밀효과 분석을 통하여 적정 배수재 설치간격의 범위를 확인하였다.

  • PDF

Evaluation of Effective Section Area of Shear Steel in Reinforced Concrete Circular Columns (철근콘크리트 원형기둥의 전단철근 유효단면적 평가)

  • 김장훈
    • Journal of the Korea Concrete Institute
    • /
    • v.11 no.3
    • /
    • pp.81-88
    • /
    • 1999
  • In order to properly evaluate the shear strength of reinforced concrete circular columns due to the transverse shear reinforcement, the average of fractions of forces generated along the circular transverse hoops across the shear failure plane in the loading direction is calculated. For this, the center-to-center diameter of circular transverse hoops. spacing and the crack angle measured to the column longitudinal axis are considered. Using these variables, an equation representing the effective section area of circular transverse shear steel is proposed. The study result shows that the constant parameter. used for the calculation of the effective section area of circular hoops over the last 10 years, should not universally be applied any more. The use of the constant parameter may not seriously do harm to the evaluation of shear strength for circular columns with non-seismically designed transverse hoop reinforcement, since it gives slightly conservative results. However. for well-confined circular columns with close spacing or circular steel jacketing. it gives about 20% overestimation of the shear capacity contributed by the transverse hoop steel.