• 동력기계공학회지
• /
• 제6권3호
• /
• pp.57-63
• /
• 2002

This paper describes the acoustic analysis of mid duty truck. The focus of the analysis is on structure borne engine noise with major contributions of 2nd order. It has been previously recognized that the noise contribution of each transfer path of structure borne noise can be varied with the charateristics of each mounts and vibro acoustic sensitivity of car body. The structure of car body will be split up into three major sub components, which are modeled separately, the engine, the frame and the cab. The acoustic performance is evaluated on three levels: engine to frame transfer, frame to cab transfer, and panel contribution from cab to driver. In order to perform these analyses, analytical models are created for the engine, frame, cab and acoustic cavity. The models are linked through a coupled fluid structure calculation, and through FRF Based Substructuring for the structural couplings. Based on the structural coupling calculations, a transfer path analysis is performed to identify the most important transfer paths. These paths are then the focussing points for applying modifications to the structure or the mount system. Finally, a number of modification are proposed and their effect is quantified.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.229-236
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection. which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the buckling problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The accuracy of the present element is demonstrated in the prediction of buckling loads and buckling modes of shells with multiple delaminations. The present shell element should serve as a powerful tool in the prediction of buckling loads and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• 대한기계학회논문집A
• /
• 제40권5호
• /
• pp.489-495
• /
• 2016

기어 맞물림 동적 힘은 축과 베어링을 통해 하우징에 전달되어 소음으로 발생하므로, 베어링 강성은 하우징의 최종 전달자로서 기어 소음을 제어하는데 중요한 역할을 한다. 이 논문은 스퍼기어를 위한 볼 베어링의 강성을 유도하고, 베어링 하중과 반경 방향 틈새를 고려하여 강성을 계산하였다. 그 강성을 이용하여 3 자유도 모델의 스퍼기어계의 운동방정식에 적용하여 모드 특성을 해석하였고, 유한요소법으로 검증하였다. 그 결과 베어링 하중이 클 때보다 작을 때는 틈새에 따라 베어링 강성의 변화가 많았다. 베어링 강성은 저주파 고유 진동수에 영향을 주었고 기어 맞물림 주파수는 고주파 고유진동수에 영향을 주었다.

• 대한기계학회논문집
• /
• 제9권1호
• /
• pp.10-17
• /
• 1985

본 논문의 목적은 앞서의 크랙대신 2차원 탄성문제의 경계를 따라 절편적인 전위(discrete edge dislocation)를 분포시켜 경계응력과 평형을 이루는 전위벡타의 크기를 얻고 이들로 부터 영역내 임의의 점에서 응력을 얻는데 있다. 크랙에 대한 전위이론의 적용에서와는 달리 여기서는 경계가 폐곡선을 이루므로 이에따른 전위분 포 방법이 논의 되었다. 또한 이 방법의 실용성을 알기위해 4가지 경우에 적용되 어 얻어진 수치해의 특성이 개별적으로 검토 되었다. 이들 경우에 대해서는 전위 분포법이 유한요소법에 비해 효율적이었다. 이 방법의 확장, 개선점, 일반적인 평 가 특히 계산능률면에서 다른 수치적 방법과의 광범위한 비교평가등이 앞으로 연구될 수 있는 과제라고 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.179-184
• /
• 2001

대부분의 제품 생산 시에는 시제품을 제작하여 이에 대한 성능 심사를 통해 미비한 부분을 보완하기 위한 재설계 작업과정을 필요로 한다. 설계 작업에 가장 중요한 부분인 특정 설계 변수에 대한 민감도의 파악은 설계 작업의 핵심적인 역할을 하고 있다. 대개의 경우 진동설계를 위한 설계변수로 구조물의 단위면적, 길이, 재료의 성질과 같은 물리적인 변수를 많이 활용하고 있으며 이러한 변수들에 대한 민감도 해석 기법들은 이미 많은 연구를 통해 실용화되고 있다. 그러나 이러한 변수만으로는 주어진 조건을 만족하도록 설계하기가 어려운 경우가 있다. 이런 경우는 부가구조물을 첨가하여 저진동 설계조건을 만족하는 구조물을 제작하는 것이 보편적이다. 한편, 구조물의 최적화 과정에서 고유진동수를 고려해야 하는 경우가 많다. 저주파 영역의 문제에서는 첫번째 고유진동수가 구조물의 진동량에 관계되는 중요한 요인이 되고, 또한 공진에 의한 문제가 발생했을 경우에는 고유진동수를 옮겨서 공진을 회피할 수 있기 때문이다. 본 연구에서는 에어컨 실외기의 진동을 저감하고 그로 인한 구조기인 소음을 저감하기 위하여 음압 레벨을 바탕으로 정한 관심 주파수 영역에 고유진동수가 존재하지 않도록 부가구조물을 최적화하였다. 최적화에 필요한 민감도는 신뢰성 있는 유한요소 모델을 구성하는 것이 쉽지 않으므로 실험으로 구한 주파수 응답함수를 이용하였다.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.109-117
• /
• 1993

Force balance method is employed to predict forging information such as forging load, tool pressure and normal stress at the surface of tangential velocity discontinuity. The incipient stages of deformation for the plane strain forging of rectangular billets in V-shaped dies of different semi-angles are analysed. To construct an approximate model for the analysis of deformation by the force balance method in the incipient deformation stages, slip-line field is used. When the deformation mode by slip-line method is the same as that by force balance method, the slip-line method and the force balance method give identical solutions. The effects of die angle, coefficient of friction, billet geometries and deforma- tion characteristics are also investigated. In order to verify the validity of force balance analysis, the rigid-plastic finite element simulation for the various forgig parameters are performed and performed and find to be in good agreement.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.40-47
• /
• 1995

This study was carried out to develop a finite element analysis model that considers the semi-rigid characteristics of a wood-dowel joint, which is different from conventional joints that are used in the field of engineering. Wood-dowel joints are classified as semi-rigid joints that possess the following characteristics: (1) they are less stiffer than rigid joints and (2) their stiffness is determined by the dowel's diameter, depth of dowel embedment in the face member and quantity of pin dowels. In this study a finite element model that considers the changes in stiffness according to the above mentioned factors was developed and its suitability was verified by experiments using a wood-dowel joint test specimen made up of particleboards. After comparing the experimental results and the analysis results of the wood-dowel joint which was applied with the proposed finite element model, less than 10% of error was found which is considered to be negligibly small. Hence this shows that this proposed finite element model can be used to predict deformation of wood-dowel joints.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.544-547
• /
• 2008

As the mobile electronic product is getting slimmer and smaller, the necessity of keypad is being increased. But the possibility of mis-typing keypad is increased rapidly due to the integrated keypad in the small mobile product. The business division has not considered the methodology of keypad design essentially. In this paper, analysis method and design evaluation standard to reduce the mis-typing of UMPC(Ultra Mobile Personal Computer) is suggested. First, the finite element analysis model and the biomechanical human body model are implemented in order to simulate the exact contact characteristic between finger and keypad. The reliability of analysis model is guaranteed by the comparison of the contact pressure between analysis result and experiment result of the pressure sensor. The design optimization of key shape and layout is derived through the response surface method. The prototype model is produced with the optimized design of keypad, and then it verified the advanced function with user mis-typing detection test. The optimized keypad design reduced the mis-typing ratio from 35% of existing model to 75 of proposed model. If this paper is widely applied to not only UMPC but also the other electronic products, the emotional quality of all products could be improved considerably.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.932-938
• /
• 2001

This study is concerned with the shape optimization of stem for the artificial hip prosthesis with unbonded cement mantle. The artificial hip prosthesis with unbonded cement mantle allows a stem to slip on cement mantle because of polished stem surface. Unbonded cement mantle type has several advantages compared with bonded cement mantle type, for example, small micro motion, preventing stress shielding and so on. In this study, 2-dimensional axisymmetric model was developed with considering characteristics of unbonded cement mantle. Moreover, optimal shape of stem was obtained by using feasible direction method. The objective of this optimization is maximizing supported vertical loading. The slip motion and stresses of stem, cement mantle and bone is used for constraints. The optimal shape which obtained by this study has slope of 0.15 in proximal part and maintains the width about 5mm in distal part In addition, simplified 3-dimensional analysis which applying optimal shape is carried out. The result of 3-dimensional analysis showed that optimal shape has some advantages for cement mantle stress. However, more realistic 3-dimensional analysis which including bending effect, complex geometries etc. is needed in further research.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.61-66
• /
• 2010

A virtual manufacturing system that is composed of JMatPro, a material modeler and $DEFORM^{TM}$-HT, a finite element package is applied to the hot press forming process: high temperature material properties for each phase such as flow stress, elastic modulus, Poisson's ratio, thermal expansion coefficient, in addition to TTT curve are predicted by JMatPro and taken into $DEFORM^{TM}$-HT to predict the material behavior considering phase transformation and heat transfer simultaneously. In order to verify the accuracy of computation, the residual stress and the springback were compared with the experimental measurements. Both the predicted and measured principal residual stresses and amount of springback were in good agreement. It was also found that the residual stresses generated from hot press forming are not negligible as it has been generally assumed, although the springback deformation is quite small.