• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.55-59
• /
• 2004

유한요소법을 이용하여 전자장을 해석할 경우 전류원이 전 영역에 비해 극히 작은 영역이면, 요소분할 과정에서 소스부분을 세분하여야 하므로 결국 미지수의 증가를 가져오게 된다. 또한, 선전류 문제의 경우 2차원 유한 요소 해석이 용이하지 않다. 이를 보안하기 위해 본 논문에서는 소스가 선전류이고 관심 영역이 선전류원으로부터 떨어져 있는 경우, 소스 영역은 해석해를 적용하여 유한요소법과 결합하는 방법을 제시하였다. 해석적인 해는 원통좌표계에서 반정에 대한 멱함수와 회전각도에 대한 삼각함수의 곱의 형태로 표현된다. 이때 두 종류의 적분 상수가 있는데, 이는 경계상의 포텐셜값과 유한요소법의 경계 적분항을 푸리에급수로 전개한 계수로 표현된다. 제안한 알고리즘의 검증을 위하여 해석해가 존재하는 모델을 설정하여 해석적인 방법, 기존의 유한요소 법 및 결합 방법에 의한 해를 비교 검증하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.275-278
• /
• 2009

전통 목구조 건축물은 크고 작은 부재가 많이 결구되어 있기 때문에 구조해석을 위한 모델링에 어려움이 있다. 기존에 제안된 모델링 기법은 모델링과 해석에 많은 시간이 필요하기 때문에 이를 개선할 수 있는 효율적인 방법이 필요하다. 본 연구에서는 전통 목구조 건축물 중 가장 많은 부재로 구성된 공포의 거동을 구현할 수 있으며 모델링과 해석에 소용되는 시간을 줄일 수 있는 모델링 기법을 제안하였다. 제안된 모델의 적합성을 확인하기 위하여 다양한 하중 재하 형태에 대한 유한요소 모델의 응답과 비교하였다. 해석결과에 따르면 제안된 모델의 응답은 유한요소해석결과와 10% 이내의 오차범위 안에 있어 공포의 해석시 보다 간편하게 활용할 수 있을 것이다.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.113-118
• /
• 1998

CERVENKA CONSULTING의 설립자인 Vladimir Cervenka는 1970년 미국 Colorado 대학에서 콘크리트 크랙(Concrete Crack)과 관련하여 개발되어지던 유한요소해석 프로그램을 박사학위 취득 후 체코의 Czech Technical University와 Stuttgart University에서 계속 공동 개발이 되었다. 1990년에 CERVENKA CONSULTING이라는 회사가 설립이 되었고 그 후 "SBETA"라는 콘크리트 구조의 균열(Crack), 파괴(Fracture Mechanics) 등의 비선형모델(Nonlinear Material Model)의 유한요소해석(Finite Element Analysis) 프로그램을 상용화 출시하여 그동안 여러번 version-up이 되면서 현재는 두 대학의 교수, Jana Margoldova와 Radomir Pukl가 개발에 참여하여 최근에는 SBETA 2.0이 세계 여러 나라에서 사용이 되고 있는 콘크리트 구조의 크랙 해석용 프로그램이다.

• Journal of the Korean Magnetics Society
• /
• v.7 no.2
• /
• pp.109-116
• /
• 1997

This paper describes an implementation of the rotational hysteresis analysis using the finite element method and a vector hysteresis model. The vector hysteresis model is extended from the magnetization-dependent Preisach model. The magnetization of each element is calculated for a given history of the rotating field. The lagging angle and the magnitude of the magnetization for an applied field are evaluated. The experimental results show that the magnetization characteristics of the magnetic materials under the rotating field can be analyzed accurately by the proposed method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.230-235
• /
• 2009

This paper describes an automatic finite element mesh generation for finite element analysis of three-dimensional structures. It is consisting of fuzzy knowledge processing, bubble meshing and solid geometry modeler. This novel mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of bubbles, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Bubble is generated if its distance from existing bubble points is similar to the bubble spacing function at the point. The bubble spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of finite element for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for 3D geometry.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.4
• /
• pp.20-27
• /
• 2021

The present study presents a nonlinear finite element analysis (FEA) approach using the general program of Abaqus to evaluate the seismic response of unreinforced masonry walls strengthened with the steel bar truss system developed in the previous investigation. For finite element models of masonry walls, the concrete damaged plasticity (CDP) and meso-scale methods were considered on the basis of the stress-strain relationships under compression and tension and shear friction-slip relationship of masonry prisms proposed by Yang et al. in order to formulate the interface characteristics between brick elements and mortars. The predictions obtained from the FEA approach were compared with test results under different design parameters; as a result, a good agreement could be observed with respect to the crack propagation, failure mode, rocking strength, peak strength, and lateral load-displacement relationship of masonry walls. Thus, it can be stated that the proposed FEA approach shows a good potential for designing the seismic strengthening of masonry walls.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.323-331
• /
• 2010

In this study, we propose a 3D finite element (FE) model for the residual stress under oblique shot peening. Using the FE model for an oblique impact, we examine the effects of factors on the residual stress such as the Rayleigh damping in the material, dynamic friction, and the rate dependency of the material and systematically integrate the effects. The plastic deformation of the shot is also emphasized. Then, the FE model is used to study oblique multi-impacts. The results obtained using the FE model are compared with experimental x-ray diffraction (XRD) results; in contrast to the rigid and elastic shots, plastic shots are found to produce residual stresses similar to that shown in the XRD results. Thus, the 3D FE models with integrated factors and plastically deformable shots are validated. The proposed model will serve as a basis for the 3D FE model for multi-impacts with different impact angles to simulate the actual phenomenon of shot peening.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.191-199
• /
• 2000

In this research, the finite element analysis of piezocone penetration and dissipation tests has been conducted using the anisotropic elastoplastic-viscoplastic bounding surface model, virtual work equation, and theory of mixtures formulated in the Up[dated Lagrangian reference frame for the large deformation and finite strain nature of piezocone penetration. The formulated equations have been implemented into a finite element program. The cone resistance, excess pore water pressure, and dissipation of excess pore water pressure from the finite element analysis have been compared and investigated. An effective simulation could be performed with the use of the anisotropic and viscous soil model. The finite element formulations and the results are described in part 'I' and part 'II' respectively.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.361-375
• /
• 2007

This paper presents the results of investigation on tunnelling-induced ground surface settlement characteristics in water bearing ground using finite element (FE) stress-pore pressure coupled analysis. Fundamental interaction mechanism of ground and groundwater lowering was first examined and a number of influencing factors on the results of the coupled FE analysis were identified. A parametric study was then conducted on the influencing factors such as rock type, thickness of soil layer, permeability of shotcrete lining, among others. The results indicate that the tunneling-induced groundwater drawdown results in a deeper and wider settlement trough than without groundwater drawdown, and that the Error function approach does not yield satisfactory result in predicting a settlement profile. The results of analysis are summarized so that the relationship between the settlement and the influencing factors can be identified.

• Composites Research
• /
• v.24 no.3
• /
• pp.31-38
• /
• 2011

In this paper, a novel hybrid composite shield to protect space structures from hypervelocity impact of micrometeoroid and space debris is proposed. The finite element model of the proposed shield was constructed and finite element analysis was conducted to approximate the energy absorption rate. Before the final model analysis, analysis of each component including the aluminum plate, PMMA plate, and intermediate layer of fabric was performed, verifying the finite element model of each component. The material properties used in the analyses were predicted material property values for high strain rates. The analysis results showed that, other than the fabric, the energy absorption rate of each component was in agreement. Afterwards, the finite element model of the hybrid composite shield was constructed, where it was analyzed for the restrained and unrestrained fabric boundary condition cases. Through the finite element analysis, the fiber pullout mechanism was realized for the hybrid shield with free boundary inserted fabric, and it was observed that this mechanism led to energy absorption increase.