• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.437-448
• /
• 2000

In this study, a numerical analysis method for soil-pile interaction in frequency domain problem is presented. The total soil-pile interaction system is divided into two parts so called near field and far field. In the near field, beam elements are used lot a pile and plain strain finite elements for soil. In the far field, dynamic fundamental solution for multi-layered half planes based on boundary element formulation is adopted lot soil. These two fields are coupled using FE-BE coupling technique. In order to verify the proposed soil-pile interaction analysis, the dynamic responses of pile on multi-layered half planes are simulated and the results are compared with the experimental results. Also, various numerical analyses of piles considering different conditions of soil-pile interaction system are performed to examine the dynamic behavior of the system. It has been found that the developed method which satisfies the radiation conditions of multi-layered half planes can be applied to various structure systems effectively in frequency domain.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.69-79
• /
• 2009

The purpose of this study was to evaluate the influence of elastic modulus of restorative materials and the number of interfaces of post and core systems on the stress distribution of three differently restored endodontically treated maxillary second premolars using 3D FE analysis. Model 1, 2 was restored with a stainless steel or glass fiber post and direct composite resin. A PFG or a sintered alumina crown was considered. Model 3 was restored by EndoCrown. An oblique 500 N was applied on the buccal (Load A) and palatal (Load B) cusp. The von Mises stresses in the coronal and root structure of each model were analyzed using ANSYS. The elastic modulus of the definitive restorations rather than the type of post and core system was the primary factor that influenced the stress distribution of endodontically treated maxillary premolars. The stress concentration at the coronal structure could be lowered through the use of definitive restoration of high elastic modulus. The stress concentration at the root structure could be lowered through the use of definitive restoration of low elastic modulus.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.264-264
• /
• 2019

개수로 흐름 해석을 위해 수치모형을 적용할 때 반드시 거쳐야 하는 과정이 격자망을 구성하는 일이다. 불규칙한 형상의 자연수로를 모의할 때 격자망 생성은 쉬운 일이 아니며, 따라서 가시적으로 격자망 생성을 돕고, 격자망의 수정도 용이한 도구가 요구된다. 따라서 본 연구에서는 수심적분된 흐름방정식을 지배방정식으로 하여 개수로 흐름 해석을 용이하게 하고자 그래픽 사용자 인터페이스(GUI)를 개발하였으며, 이를 소개하고자 한다. 격자망은 기본적으로 사각형과 삼각형 요소로 구성될 수 있으며, 유한차분모형 등에서는 정형사각형 격자망을, 유한요소모형에서는 비정형 사각형 및 삼각형 격자망 또는 혼합망을 생성시킬 수 있다. 이산점(scatter points)이나 절점(node points)을 생성하거나 기존의 자료를 불러들여 삼각망 또는 사각망을 형성시킬 수 있으며, 연속선(polylines)을 작성하여 형성된 폐다각형(polygones)을 이용하여 정규 또는 비정규의 삼각망 또는 사각망을 형성시킬 수 있다. 또한 두 점사이를 선형 또는 반원 형태로 편향 정도(biased value)를 설정하여 원하는 개수만큼 나눌 수 있도록 하여, 보다 효율적인 격자형성이 가능토록 하였다. 기존 상용 프로그램에서 작성된 격자를 불러들여 활용 가능하며, 백그라운드 이미지로 지형도나 위성사진을 띄어놓고 이미지 상에서 격자를 형성할 수도 있다. 기본적으로 마우스를 이용하여 화면의 이동, 확대 및 축소와 점, 선, 요소의 생성 및 선택이 가능하다. 본 프로그램은 Qt와 modern OpenGL을 바탕으로 제작되었으며, 마이크로소프트사의 windows 뿐만 아니라 Mac OS, Linux 버전의 설치 파일 작성이 가능하다.

• Journal of Convergence for Information Technology
• /
• v.11 no.12
• /
• pp.115-126
• /
• 2021

This study develops a simulation model that performs flood analysis considering both urban and river flood. For the analysis of river flood, this study considers river overflow by levee breach, and reflects the concept of the dual drainage systems for the analysis of urban flood. In relation to the surface flood analysis, FEM technique is applied to the flood diffusion analysis in order to conduct the flow analysis of urban and river flood simultaneously. For the verification of the model, it is first applied to the conceptual model, and then applied to the actual watershed. It is expected that this study will be able to reduce flood damage and to prepare effective countermeasures to reduce flood damage.

• Journal of Korea Water Resources Association
• /
• v.38 no.7 s.156
• /
• pp.537-544
• /
• 2005

For the proper management of high pressurized gas storage caverns, analysis of groundwater flow field and inflow quantity according to the groundwater head, gas storage pressure and water curtain head should be performed. The finite element method has been widely used for the groundwater flow analysis surrounding underground storage cavern because it can reflect the exact shape of cavern. But the various simulations according to the change of design factors such as the width of water curtain, shape of cavern etc. are not easy when elements were set up. To overcome these limitations, two dimensional groundwater flow model is established based on the boundary element method which compute the unknown variable by using only the boundary shape and condition. For the exact computation of drainage rate into cavern, the model test is performed by using the exact solution and pre-developed finite element model. The test result shows that the model could be used as an alternative to finite element model when various flow simulations are needed to determine the optimizing cavern shape and arrangement of water curtain holes and so forth.

• Computational Structural Engineering
• /
• v.5 no.4
• /
• pp.103-111
• /
• 1992

In this paper, liquid sloshing effects in rectangular storage structures for spent fuel under earthquake loadings are investigated. Eulerian and Lagrangian approaches are presented. The Eulerian approach is carried out by solving the boundary value problem for the fluid motion. In the Lagrangian approach, the fluid as well as the storage structure is modelled by the finite element method. The fluid region is discretized by using fluid elements. The (1*1)-reduced integration is carried out for constructing the stiffness matrices of the fluid elements. Seismic analysis of the coupled system is carried out by the response spectra method. The numerical results show that the fluid forces on the wall obtained by two approaches are in good agreements. By including the effect of the wall flexibility, the hydrodynamic forces due to fluid motion can be increased very significantly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.89-98
• /
• 1987

Analyzed by using finite element method was 2-dimensional pollutant transtport phenomenon considering longitudinal and lateral direction in river. The Galerkin's finite element method based on linear interpolation is used and triangle is adopted as an element. In a number of model test attempts it has been demonstrated that the results calculated by the model are in good agreement with analytical solutions in a simplified channel where there is a known solution available. Actual application of the model is attempted along the 9km reach of the Han River considering the influx of the Tan Cheon and the Joongryang Cheon. The resultant 2-dimensional BOD concentrations profile in the reach is exhibiting more realistically the field situations than conventional 1-dimensional models are.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.895-899
• /
• 2009

실제 하천에서는 지형적 이산화에 따른 복잡성으로 인해 마름/젖음 현상이 발생하며 그로 인해 작은 수심에서 수치해석의 안정성에 영향을 주어 해석을 불가능하게 한다. 자연수로는 저수시 및 평수시에 물을 소통시키는 주수로부와 홍수시 수위 상승에 따라 주수로부에서부터 범람하게 되는 홍수터로 구성된다. 홍수터는 홍수류의 일시적인 저장이나 하류로 흐름을 전달하는 복합수로의 부분으로 사용된다. 자연수로에서 이와같은 흐름구조는 불규칙한 단면형상, 조도계수 등에 의해서 더욱 복잡하게 나타난다. 본 연구에서는 복잡한 지형과 자연 하천구조에 대한 동역학적인 흐름특성을 해석하고 오염물질의 이송-확산 해석 및 토사이송 해석과 연계하기 위해서 개발된 RAM-2 모형에 동수역학적 해석을 실시하였다. RAM-2 모형에는 대상하도에 대한 마름/젖음의 처리를 위해 흐름의 시간별 수위상승 및 하강 속도를 고려한 Deforming Grid 기법을 적용하였으며, 이에 대한 적용성을 검토하기 위해 마름/젖음 조건을 가지는 실험수로와 홍수터를 가진 사다리꼴 단면 그리고 실제 하도에 대해 적용하여 그 결과를 살펴보았다.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.2
• /
• pp.11-21
• /
• 2019

This paper describes the applicability of FEA(Finite Element Analysis) to the simulation of pile pullout behavior under various soil conditions (relative density and fines content), in order to evaluate reasonably the pullout resistance of pile. That is, the results of previous research (You et al., 2018) were analyzed by FEA under the same conditions. The FEA results showed that axisymmetric analysis using virtual ground was able to evaluate the skin friction of the pile. Also, axisymmetric analysis, which can apply the shear resistance characteristics of the pile-soil interface in various soil conditions, could be used as an analytical method that can simulate a reasonable pile pullout behavior. Therefore, the analytical model proposed in this study was able to simulate appropriately the pullout behavior based on the stress-strain relationship of the pile-soil interface.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.203-211
• /
• 2001

고층구조물의 해석에 사용되는 ETABS와 같은 상용프로그램은 해석의 단순화를 위하여 강막가정을 사용하게 된다. 이와 같은 강막가정은 일반적으로 바닥판의 휨 강성과 보의 편심효과를 무시하게 된다. 이러한 가정은 골조구조물의 정적해석에 대해서는 정당한 결과를 얻을 수 있으나 동적해석의 경우에는 바닥판의 휨 강성과 보의 편심효과가 구조물의 횡 방향 거동에 주요한 영향을 미치게 된다. 그러나 바닥판의 영향과 보의 편심효과를 고려하기 위해서는 유한요소의 특성상 바닥판과 보를 여러 개의 요소로 나누어야 하며, 이로 인하여 해석과 구조물의 모형화에 많은 시간이 소요되는 단점이 발생하게 된다. 본 논문에서는 이러한 단점을 보완하기 위하여 부분구조기법과 대형요소를 사용한 효율적인 모형화 방법에 대하여 연구하였다. 또한 최종적으로 각 층에 대하여 강막가정을 적용하여 층 당 3개의 자유도만을 고려하는 막대모델을 제안하였다. 본 논문에서는 제안한 모형화기법의 정당성을 검토하기 위하여 구조물의 응답을 비교하였다.