• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.800-801
• /
• 2008

유체의 전자기력에 의한 거동특성 파악을 위해 전자기 체적력에 의한 접근법을 이용하였다. 수정된 Kelvin force을 유체정역학 방정식에 도입하고 유체표면에서의 압력이 일정해야한다는 원리를 이용하여 유체 표면의 형상을 얻어낸다. 액적에 인가하는 전압의 크기와 전극을 꽂는 높이의 변화에 따른 액적의 Electrowetting 영향을 수치해석한다.

• Journal of the KSME
• /
• v.28 no.2
• /
• pp.150-155
• /
• 1988

공학의 기본을 이루고 있는 Newton의 역할은 고체역학과 유체역학으로 분류가 되며 고체역학은 다시 정역학과 동역학으로 세분된다. 동역학은 가속의 운동을 가진 물체를 다루는 학문으로 다시 두 부분으로 나누어진다. 하나는 운동학(kinematics)이고 다른 하나는 운동역학(kinetics) 이다. 운동학은 운동자체 즉 속도, 가속도만을 취급하며 운동역학은 운동을 일으키는 힘과 그 결과로 생기는 운동을 연관짓는 학문이다.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.51-61
• /
• 1993

The hydrodynamic problem when the pressurized bag submerges partially into water and oscillates was formulated by Lee(1992), and the solution method was given. In his formulation, however, the compressibility of air was neglected and the pressure inside the bag was assumed to be constant. In this paper, the formulation was done including the air compressibility and the wall to block fling around phenomenon. The compression process was assumed to be a isothermal process for a static problem, isentropic process for a dynamic problem. And the stability was analyzed for the static problem. Through the various numerical calculations, the forces and the shape of the bag were compared with those of a rigid body case, constant pressure case, and variable pressure case.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.30-42
• /
• 2010

The effects of internal waves on dynamics of hypoxic waters were investigated by numerical simulation by means of a hydrostatic-ecosystem coupled numerical model for Lake Biwa. The numerical model consists of hydrostatic and ecosystem submodels. Numerical simulation was carried out for a period during April 2007 and March 2008, after preliminary numerical simulation for three years. As a result, the numerical model could capture the vertical profiles of the observed water quality. During September 30 and October 21 in 2007, the major internal waves were Kelvin and Poincare waves, the periods of which were 1.63 or 1.77 days and 0.48 days, respectively. Hypoxic waters appeared in bottom boundary layer around October and were still when thermocline locates in upper layer. During late autumn and winter seasons, differences in density between upper and lower layers were reduced and the amplitude of internal waves increased. Hypoxic waters began to move under the effects of internal waves. Movement of hypoxic waters will diminish the habitat for aquatic organisms in deeper waters.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.189-205
• /
• 1996

The first - stage study of the three - stage SWATH ship development program of Hyundai Maritime Research Institute has been completed. Various computer programs have been prepared in advance to calculate and predict various properties and characteristics of SWATH ships. With these design tools, theoretical analyses for the systematic variation of design parameters were performed, and step - by - step model tests were carried out to derive the final configuration.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.1-13
• /
• 1995

In order to investigate the effect of liquid balancer in washing machine, we identify the vibration characteristics of suspension system of washing machine and formulate the 4 D. O. F. system dynamic equations. As the washing machine rotates higher speed, it is emphasized to reduce the ecentric force due to unbalanced mass. Nowadays, the most effective cancelling method of eccentric force is known as the usage of liquid balancer. To determine the liquid distribution in liquid balancer, the fluid statics is considered. The system dynamic equations are solved by Runge-Kutta method and represent the good characteristics of real washing machine in X-Y plane. The accuracy of the numerical solution was examined by experiments. The simulation results show that the unbalanced mass has so much influence on vibration magnitude and the rotating shape of spin-basket. But the effect of mass reduction due to the dehydration of the spin-basket has little influence on transient vibration.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 1993

Various geometric modeling techniques for a hull have been developed with wide application of computer to the ship design. Up to now, they are used for the representation of the sculptured surface with the piecewise polynominal curves or surfaces for a conventional hull. In this paper, a convenient and accurate modeling technique that is instancing and blending of the geometry primitives is introduced for a non-conventional hull such as SWATH, trimaran, caisson etc. Geometric characteristics, hydrostatic particulars and stability of the definded hull are calculated.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.3
• /
• pp.49-59
• /
• 2004

The paper describes the preliminary ship design method using deterministic approach and probabilistic approach. In deterministic approach, there are computational aspects to applying not only the integration concurrently of principal dimension decisions and hull form variations but also hydrostatic coefficients that applied to optimization iterative process. Therefore, this paper developed that actual design concept at the preliminary ship design more than sequential design which separated in principal dimension decisions and hull form variations. Furthermore, a probabilistic approach at the preliminary ship design is applied to efficiently solve design information uncertainty that compared to deterministic approach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.139-148
• /
• 2000

In this paper, the interaction of oblique incident waves with a bottom-mounted and fluid-filled flexible membrane structure is investigated in the frame of linear hydro-elastic theory. The static shape of a membrane structure containing the fluid of a specific density is initially unknown and must be calculated before the hydrodynamic analysis. To solve hydrodynamic problem, the fluid domain is divided into the inner and outer region. The inner solution based on discrete membrane dynamic model and simple-source distribution over the entire fluid boundaries is matched to the outer solution ba~ed on an eigenfunction expansion method. The numerical results were compared to a series of Ohyama's experimental results. The measured reflection and tran¬smission coefficients reasonably follow the trend of predicted values. Using the computer program developed, the performance of a bottom-mounted and fluid-filled flexible membrane strocture is tested with various system parameters (membrane shape, internal pressure, density ratio) and wave characteristics (wave frequencies, incident wave angle). It is found that a bottom-mounted and fluid-filled flexible membrane structure can be an effel;tive wave barrier if properly designed.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.90-98
• /
• 2016

When ships and offshore plants are flooded or the floating crane is equipped with a heavy object, these floating structures are excessively inclined. In this case, immersion, heel, and trim affecting the hydrostatic restoration performance are very large and are coupled each other. In this paper, in order to calculate a static equilibrium position of floating structures with excessive inclination, the nonlinear governing equations were constructed by sequential linearization. In the governing equation, the immersion, heel, and trim are fully coupled, and the equations are represented using a plane area, a primary moment, and a moment of inertia of the water plane area. Therefore, it is possible to calculate the additional factor related the water plane area for estimating stability. Position and orientation of the floating structure are obtained by iterative calculation. The calculated results are compared with the previous studies in the aspect to the performance and the accuracy.