• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.222-228
• /
• 2008

We conducted a dynamic analysis of an underwater test collector, which operates on extremely soft soil of deep-seafloor. The underwater test collector consists of nodule pick-up device, vehicle tracks, nodule crusher, loading frame and electric-electronic system. The weight of underwater test collector is about 8600 kg. The average normal pressure, that the underwater test collector supports, is about 6.0 kPa. The dynamic analysis model of underwater test collector is developed using commercial software RecurDyn-LM and Visual Fortran 90. A terramechanics model of extremely soft soil is implemented to the software based on user-written subroutine and applied to the dynamic analysis of the underwater test collector model. The dynamic responses of test collector are studied with respect to track velocities, terrain conditions, and coefficients of added mass and drag.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.3-7
• /
• 1992

포는 대체로 정확도와 최대 발사거리 및 최대 발사속도 등에 의해 그 성능 이 표현된다. 그 중에서도 최대 발사속도는 매우 중요한 인자로서 포의 주퇴 복좌 장치의 성능에 의해 직접적으로 영향을 받게 된다. 따라서 포의 최대 발사속도 향상을 위해서는 주퇴복좌 장치의 동특성 해석 능력을 확보하고, 그로부터 주퇴 장치의 설계 변경이 가능하도록 해야 한다. 한편, 주퇴복좌기 의 주퇴특성은 주퇴시 총주퇴저항력이 전주퇴장에 대해서 거의 일정해야만 포신에 전달되는 힘을 최소로 하면서 주퇴시간을 최소로 할 수 있으며 이러 한 설계 개념으로 주퇴복좌기를 설계한다. 그에 따라 주퇴복좌기는 그 내부 가 가변 오리피스 및 조절 로드로 이루어져 주퇴복좌기의 주퇴 저항력을 주 퇴속도 및 주퇴변위에 따라 변화시키도록 되어 있다. 따라서 주퇴복좌기는 필연적으로 강한 비선형 특성을 나타낸다. 이러한 주퇴복좌기를 모델링할 때 에 기존에는 주퇴복좌기내의 모든 유체역학적 요소를 고려하여 모델링하는 기법이 통용되어왔다. 그러나 이러한 모델링은 각 요소의 모델링 오차가 누 적될 위험이 있으므로 정확한 모델링을 보장할 수 없으며, 매우 복잡한 과정 을 거쳐야 한다. 따라서 본 연구에서는 주퇴 완충기 시뮬레이터를 이용한 실 험에 따른 계의 파라미터 예측을 통하여 모델링하는 기법을 시도하여 보았 다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.844-853
• /
• 2014

Since the active sonar for a naval vessel is usually installed in a bulbous bow, GRP(Glass reinforced plastic) material with low density and high strength is used for the material of the sonar dome window in order to prohibit impact by slamming wave or foreign material in the sea. The structural safety of the sonar dome is varied according to the interior and exterior distributed pressure on the sonar dome. Therefore, the variation of the structural safety according to the pressure variation of the sonar dome window caused by the drain valve state is studied by CAE.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.265-270
• /
• 1994

본 연구에서는 케비테이션 터널에서의 경사진 원형실린더의 유동유기진동시험을 통하여 경사각에 따른 유동유기진동 특성규명과 아울러 유체력 계수들의 실험적 산정을 시도하였으며 도출된 주요한 결론은 다음과 같다. 경사각이 20.deg. 이상되면 마찰저항력에 비해 수직항력이 지배적이 되며, 이때 수직항력계수는 여러 관찰자에 의해 관측된 범위의 값(1.7-2.0)을 갖는다. 또한, 양력계수 $C_{L,rms}$은 유속범위 4$_{n}$D<8의 범위에서 lock-in 현상에 의해 큰 값을 갖게 되며, 경사각이 커질수록 큰 값을 갖는다. 경사각이 30.deg.인 경우 최대값은 약 0.9, 20.deg.인 경우 0.4로 계측되었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.133-140
• /
• 1984

A "two-fluid" equation model has been applied for predicting gas-solid suspension flows through a Venturi tube. In the "two-fluid"equation model, the bulk motion of the particles is considered as a continuum whose governing equation is obtained by averaging the conservation equations over a volume and expressing the equations in differential forms. Closure of the time-mean equations is achieved by modeling the turbulent correlations with an extended mixing-length theory. Proposed closure model is found to aptly simulate the dependency of the static pressure drop on the particle size, flow rate and the loading ratio.d the loading ratio.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.706-712
• /
• 1986

The unsteay heat transfer from an isothermal circular cylinder in fluctuating cross flow is simulated numerically, for the case where the amplitude of the oscillating velocity is small compared with the mean velocity. By solving the linear perturbation equations derived from the unsteady full Navier-Stokes and the energy equations, the amplitude and the phase of heat transfer response are obtained in the range of Reynolds number R$_{3}$ < 40. The effects of the velocity, the cylinder radius and the frequency on the response are expressed graphically in terms of the normalized velocity and the cylinder radius.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.23-30
• /
• 1995

분류층 가스화기 설계를 위한 일차연구로서 가스화기 종횡비, 주입方法, 선회강도 및 주입속도 등에 따른 비반응 난류장 특성을 수치해석적 방법에 의해 파악하였다. 수치해석은 검사체적에 기초한 Patankar의 유한차분방법을 이용하였으며 압력과 속도의 연계문제는 SIMPLEC 알고리즘을, 레이놀즈 전단력은 K- 난류모델을 사용하였다. 입자궤적 계산은 공기역학적 향력만을 고려하였으며 비선형적인 공기저항력에 의한 난류변동상관모델은 고려치 않았다. 이차공기 주입방법(parallell injection과 nonparallel 3$0^{\circ}C$ imjection)에 따른 수치해석을 수행하여 Ar tracer의 질량분율 및 기타 속도에 대한 實驗資料와 비교하여 만족할 만한 結果를 얻었다. 나아가서 假想的인 가스화기 모델을 대상으로 가스화기의 종횡비, 선회강도, 주입속도 및 주입각 등에 따른 와류 形成 위치 등을 포함한 유동장 특성 및 입도에 따른 궤적분석을 시도하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.391-393
• /
• 2024

본 논문에서는 수중에 존재하는 몰입형 에이전트의 움직임을 사실적으로 표현하고 수중 오브젝트들과의 상호작용에서 나타나는 외력을 시각적으로 표현할 수 있는 프레임워크를 제안한다. Unity3D와 HTC Vive를 이용해 사용자의 움직임을 추적하고 수중 물리적 요소인 부력, 저항력, 매그너스 효과를 몰입형 에이전트에 적용시켜 사용자로 하여금 수중에 작용하는 외력을 사실적으로 인지할 수 있게 한다.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.66-71
• /
• 2014

Aerodynamic design of a vehicle has very important meaning on the fuel economy, dynamic stability and the noise & vibration of a moving vehicle. In this study, the correlation of aerodynamic effect between two model vehicles moving inline on a road was studied with the basic SAE model vehicle. Drag and lift are two main physical forces acting on the vehicle and both of them directly effect on the fuel economy and driving stability of the vehicle. For the research, the distance between two vehicles is varied from 5m to 30m at the fixed vehicle speed, 100km/h and the side-wind was assumed to be zero. The main issue for this numerical research is on the understanding of the interaction forces; lift and drag between two vehicles formed inline. From the study, it was found that as the distance between two vehicles is closer, the drag force acting on both the front and rear vehicle decreases and the lift force has same trend for both vehicle. As the distance(D) is 5m, the drag of the front vehicle reduced 7.4% but 28.5% for the rear-side vehicle. As the distance is 30m, the drag of the rear vehicle is still reduced to 22% compared to the single driving.