• 제목/요약/키워드: 유체유발 진동

검색결과 119건 처리시간 0.03초

혼합날개의 주기적 유동교란에 따른 다점지지 연료봉의 고유치변화 (Variation of Eigenvalues of the Multi-span Fuel Rod due to Periodic Flow Disturbance by the Flow Mixer)

  • 이강희;우호길
    • 한국소음진동공학회논문집
    • /
    • 제20권3호
    • /
    • pp.215-222
    • /
    • 2010
  • Long and slender body, like a fuel rod, oscillating in axial flow can be unstabilized even by the small cross flow which can be activated by the flow mixer or turbulent generator. It is important to include these effects of flow disturbance in dynamic stability analysis of nuclear fuel rod. This work shows how eigen frequency of a multi-span fuel rod can be changed by the swirl flow, which is discretely generated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was calculated. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.

지지점 간극을 갖는 다점지지 유연관의 유동하중에 의한 시간응답 이력해석과 상용유한요소 해석코드의 적용 (Flow-induced Vibration Time Response Analysis of Loosely Supported Multi-Span Tube using Commercial FEA Code)

  • 이강희;강흥석;신창환
    • 한국압력기기공학회 논문집
    • /
    • 제11권2호
    • /
    • pp.68-74
    • /
    • 2015
  • Time domain response analysis for vibro-impact nonlinear behavior of multi-span tube with loose supports was performed using commercial FEA code and user subroutine. Support geometry of multi-span tube with a finite gap is realistically modeled by analytical rigid surface. Model of hydrodynamic force is based on the Qusai-steady model which accounts for the inclined angle of relative flow velocity and time delay between flow force and resulting tube motion. During tube vibration from flow loading, impact and friction at the support location is simulated using commercial FEA code with master slave contact algorithm. Analysis results has reasonable agreement with those of references and test experience. Plan of further refinement of analysis model and future test verification is briefly introduced.

회전 및 유동효과를 고려한 터보기계 블레이드의 진동해석 (Vibration Analysis of a Turbo-Machinery Blade Considering Rotating and Flow Effect)

  • 정규강;신승훈;박희용;김동현
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.519-522
    • /
    • 2010
  • 블레이드 구조변형 효과를 고려한 스테이터-로터의 케스케이드 모델의 상호간섭의 평가를 위하여 유체-구조 연계 해석 시스템을 수행하였다. 고정된 스테이트와 회전하는 로터는 상호 간섭 영향이 유동해석에 고려되었다. 또한 정적인 유체-구조 연게해석과 수렴률 증진을 효과적으로 수행하기 위하여 큰 인공감쇠를 가지는 Newmark 시간 적분 기법을 적용하였다. 수치 실험을 통해 탄성축 위치에 따른 구조 변형 효과가 케스케이드 성능에 미치는 영향을 파악하였다. 구조 변형 효과가 고려된 경우 일반적인 강체 블레이드모델에 대한 성능 예측 결과와 다소 차이가 유발될 수 있음을 보였으며 공력 탄성학적 영향을 확인하였다.

  • PDF

축방향 유속에 노출된 $5{\times}5$ 지지격자 스트랩의 진동특성 (The Strap Vibration Characteristics in $5{\times}5$ Grid Exposed to Axial Flow)

  • 김경홍;박남규;김경주;서정민
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.911-916
    • /
    • 2012
  • It is important to identify dynamic characteristics of nuclear fuel components. Since the fuel always exposed to turbulent flow, the dynamic contact between grids and rods is one of the fuel failure modes. The dynamic behavior of grids in nuclear fuels is quite complex, since two pairs of spring support are placed in the limited space. The strap in a cell has single spring and double dimples and this paper focuses on investigation of the grid strap(Test Fuel Strap, TFS) vibration in one cell. To identify the grid strap vibration, modal analysis of the strap is performed using Finite Element Method (FEM). Modal testing on a $5{\times}5$ grid structure without rods is performed. The modal testing results are compared to analytic results. In addition, random test considering rod effect is performed about a $5{\times}5$ grid with rods under real contact condition in the air. Finally, the strap vibration of a $5{\times}5$ fuel bundle in INvestigation of Flow INduced vIbraTion(INFINIT) facility is measured in real fluid velocity condition without heating. It is shown that modal frequencies from the test are almost equal to those peak frequencies in the INFINIT test.

  • PDF

펌프 맥동하중에 대한 노심지지배럴 집합체의 음향-구조 연성해석 (Acoustic Structure Interaction Analysis of the Core Support Barrel for Pump Pulsation Loads)

  • 이장원;문종성;김정규;성기광;김현민
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제5권2호
    • /
    • pp.127-134
    • /
    • 2017
  • 원자로내부구조물은 다양한 진동하중조건에서 안전성과 건전성을 유지해야한다. 그러므로 미국원자력규제 위원회는 펌프 압력 맥동에 의한 진동을 포함하여 음향으로 유발되는 진동을 평가하기 위한 규제지침서 1.20을 제시하고 있다. 본 논문은 음향-구조 연성해석 기법을 사용하여 펌프 맥동 가진으로 인한 해석을 위해 노심지지배럴 주변의 유체와 구조의 연성을 고려하여 해석하는 방법론을 제안하였다. 해석결과는 미국 Palo Verde 1호기 종합진동평가 프로그램 발전소 시험결과와 잘 일치한다. 따라서 제안된 해석 방법론은 펌프 압력맥동에 대한 노심지지배럴의 구조응답을 평가하기 위한 효과적 방법으로 판단된다.

격벽을 갖는 조압수조의 크기 결정 (Determination of the Size of Surge Tank with Partition)

  • 김경호;양해룡;오현식;이호진
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2011년도 정기 학술발표대회
    • /
    • pp.159-159
    • /
    • 2011
  • 수자원 공급의 시 공간적 편차가 큰 우리나라에서는 수자원을 이용하기 위해서 다수의 댐을 건설하고 있다. 특히, 생활수준의 향상으로 용수 수요가 급증하였기 때문에 용수가 부족한 곳에는 광역상수도 사업 등을 통하여 용수를 공급하고 있다. 댐에서 용수가 공급되기까지의 과정은 일종의 관수로 흐름으로 생각할 수 있다. 관수로 내를 흐르는 유체가 갑자기 정지하게 되면, 유체 운동 에너지의 변화가 유발되고, 그로 인해 관내에 급격한 압력의 상승이 일어나게 된다. 반대로 정지하고 있던 유체가 빠른 속도로 흐르게 되면 압력 감소가 급격하게 발생한다. 이와 같이 유체 운동 상태의 급변에 의한 압력변화와 그에 따른 압력파가 음속의 속도로 상 하류로 전파되는 현상을 수격작용(waterhammer)이라 한다. 통상적으로 수격작용은 밸브 개폐 정도가 갑자기 바뀔 때, 펌프의 급격한 기동이나 정지 시, 터빈 내 전력소요가 갑자기 바뀔 때, 댐 수위의 갑작스런 변화, 펌프 임펠러의 진동, 물 수요의 급격한 변화 등에 의해 발생하며, 수격작용은 유체의 질량과 운동량 때문에 관 벽에 큰 힘을 가하게 되어 정상적인 동수압 보다 몇 배나 큰 압력을 발생시킴으로 관 자체는 물론 펌프, 밸브, 터빈 등 관 시설물을 파손시키거나 진동, 소음 등을 야기시킴으로 대규모 건물, 공장, 발전소 등을 설계할 경우 그에 대한 적절한 대책을 강구하여야 한다. 특히 댐에 연결된 저수지 또는 조정지로부터의 도수로가 압력수로이며 그 길이가 상당히 크면 수차가 급정지했을 경우 수격작용에 의해서 압력터널 내에 과도한 압력상승이 일어난다. 이 압력상승을 방지함과 함께 발전소 부하의 증감에 따라서 수량을 공급하거나, 흡수할 목적으로 압력도수로와 수압관과의 접합부에 자유수면이 있는 수조를 설치한다. 이것을 조압수조(surge tank)라 한다(최영박, 1979). 조압수조에서 부하의 급속한 차단에 의해서 수차로 유입될 수량이 차단되면 도수로 내로 흘러 들어온 물은 관성 때문에 수조 내의 수위를 상승시키고, 수조 수위가 어느 정도 이상으로 되어 저수지 수위 보다 상승하면 수조로의 유입이 정지하고 반대로 수조에서 저수지로 역류하여 수조수위는 하강한다. 즉, 조압수조는 도수로 내에 발생한 과도한 압력을 수조 내 수면의 승강운동을 이용하여 감소시키고 원래의 안정적인 수위로 회복시킨다. 본 연구에서는 수격작용에 대한 댐 안정성을 확보하는 수단 중의 하나인 조압수조에 대해 살펴보았다. 연구대상으로 용담댐을 선정하였다. 용담댐에 대한 기존의 검토결과 수직 갱의 지름이 5m 이상이면 조압수조의 동적안정조건을 만족 시키는 것으로 조사되었다. 댐의 설계홍수위인 EL. 265.5m를 기준으로 조압수조의 안정성을 감소시키지 않는 범위 내에서 조압수조 내 격벽 설치 유 무에 따른 수조의 최적 크기를 산정하였다. 산정결과를 분석한 결과 동일 조건에서 격벽을 설치한 경우가 격벽을 설치하지 않은 경우에 비해서 조압수조의 면적이 약 21% 감소하는 것으로 나타났다.

  • PDF

내부에 변동하는 유동을 갖는 직선 파이프의 안정성 해석 (Stability Analysis of a Straight Pipe with Time Dependent Flow)

  • 홍성철
    • 대한기계학회논문집A
    • /
    • 제28권3호
    • /
    • pp.318-324
    • /
    • 2004
  • The stability of a simply supported straight pipe is investigated. The time dependent flow is assumed to vary harmonically about a constant mean velocity. Stability conditions and dynamic reponses of a governing equation are conducted by use of multiple scale mettled. Parametric resonances and combination resonances are investigated. Stability boundaries are analytically determined. The resulted stability conditions show that instabilities exist when the frequency of flow fluctuation is close to two times the natural frequency or to the sum of any two natural frequencies. In case that the fluctuated flow frequency is close to zero or to the difference of two natural frequencies, however, instabilities are not found up to the first order of perturbation. Stability charts are numerically Presented fir the first two vibration modes.

튜브와 지지대 사이의 비선형 충격해설모델 개발에 관한 연구 (A Study on the Development of Tube-to-Support Nonlinear Impact Analysis Model)

  • 김일곤;박진무
    • 소음진동
    • /
    • 제5권4호
    • /
    • pp.515-524
    • /
    • 1995
  • Tubes in heat exchanger of fuel rods in reactor core are supported at intemediate point by support p0lates or springs. Current practice is, in case of heat exchanger, to allow clearance between tube and support plate for design and manufacturing consideration. And in case of fuel rod the clearance in support point can be generated due to the support spring force relaxation. Flow-induced vibration of a tube can cause it to impact or rub against support plate or against adjacent tubes and can result in fretting-wear. The tube-to- support dynamic interaction is used to relate experimental wear data from single-span test rigs to real multi-span heat exchanger configurations. The dynamic interaction cna be measured during experimental wear tests. However, the dynamic interaction is difficult to measure in real heat exchangers and, therefore, analytical techniques are required to estimate this interaction. This paper describels the nonlinear impact model of DAGS(Dynamic Analysis of Gapped Structure) code which simulates the tube response to external sinusodial or step excitation and predicts tube motion and tube-to-support dynamic interaction. Three experimental measurements-two single span rods excited by sinusodial force and a two span rod impacted by a steel ball are compared from the simulation nonlinear model of DAGS code. The simulation results from DAGS code are in good agreement with measurements. Therefore, the developed model of DAGS code is good analytical tool for estimating tube-to-support dynamic interaction in real heat exchangers.

  • PDF

비뉴턴 유체를 이용한 스마트 과속방지턱 소재 개발 (Development of Smart Speed Bump Using Non-newtonian Fluid)

  • 정인준;김은정;유웅열;나원진
    • Composites Research
    • /
    • 제35권4호
    • /
    • pp.277-282
    • /
    • 2022
  • 본 연구에서는 저가 재료인 전분과 물 기반의 현탁액을 이용하여 과속방지턱에 응용 가능한 스마트 소재를 개발하고 물성을 평가하였다. 유변물성측정기를 이용하여 전단율에 따른 점도 및 전단력을 측정하여 전분 농도별 전단농화 발생 현상을 확인하였다. 물체의 낙하 시험과 5-25 km/h의 주행 속도로 충격 후 진동을 측정한 자전거 주행 시험을 통해 거시적인 전단농화현상을 확인하였고, 과속방지턱의 적용 가능성을 확인하였다. 점도 측정 결과, 초기에 전단담화 구간에 이어 전단농화가 발생하였고, 전단농화 현상을 유발하는 임계 변형률은 농도가 증가함에 따라 감소하였다. 또한 전분 농도 증가에 따라 점도와 전단력이 크게 증가하였다. 낙하시험과 자전거 주행시험 결과 현탁액이 단시간에 고체 상태로 바뀌었고 충격 에너지가 유체에 흡수되었다. 유체의 농도와 가하는 충격(속도)이 증가할수록 전단농화현상이 쉽게 발생하였다. 최종적으로 물과 전분 기반의 비뉴턴 유체로 5-25 km/h 범위에서 구동하는 스마트 과속방지턱 재료의 개발을 제안하였다.

핵연료조사리그 냉각수 유동 모의장치 개발 (Development of Coolant Flow Simulation System for Nuclear Fuel Test Rigs)

  • 홍진태;정창용;허성호;김가혜
    • 대한기계학회논문집A
    • /
    • 제39권1호
    • /
    • pp.117-123
    • /
    • 2015
  • 핵연료 연소시험 도중 핵연료봉에서 발생하는 열을 효과적으로 제거하기 위해서는 핵연료의 발열량을 정확하게 계산하고 충분한 유속을 갖는 냉각수를 순환시켜야 한다. 하나로는 개방형 수조 형태로서 핵연료 연소시험을 위한 별도의 냉각수 순환 루프를 갖추고 있는데, 여기에 핵연료 조사리그를 장착하고 냉각수를 순환시킴으로써 조사중인 핵연료봉의 온도를 일정온도 이하로 유지시킨다. 특히 순환되는 냉각수의 유속이 매우 높은 상태에서 조사리그 내에 부착된 부품이나 센서들이 유체유발 진동에 의해 파손되거나 기능을 상실하는 경우 매우 큰 기회비용을 야기한다. 본 연구에서는 조사리그 부품의 건전성 사전 검토 및 고속 유동에서의 센서 동작 특성에 대한 사전검토를 위해 냉각수 모의 순환장치를 개발하였다.