• KOMUNHWA
• /
• no.63
• /
• pp.109-127
• /
• 2004

The Japanese colonialist studying the history of Korea thought that after Gochosun, Nakrang became the center of the four ruling districts of Han. This perception was based on the existence of Nakranggun near Pyongyang. This perception was extended by the

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.2
• /
• pp.167-177
• /
• 1996

To investigate the source-receptor relationships aerosol model has been used to simulate the distribution behavior of the yellow sand. Data for meteorological fields were obtained by Meso-scale Analysis and Prediction Model System/Seoul National University (MAPMS/SNU) for five days (10-14 April 1988). To obtain the distributions of concentration of yellow sand,the aerosol model has been modified to allow quantifications of relative concentration distributions of yellow sand. Source regions of yellow sand were delineated by soil maps of China and emission rate as a function of wind stress(Westphal et al., 1987). Using 3-dimensional wind fields the backward trajectories from 3 receptor grids at the layer of .sigma. =0.95, 0.9, 0.85, 0.8 were calculated. In order to facilitate quantitative assessment of source-receptor relationships, it was assumed that the perturbations in along-trajectory and cross-trajectory proceed linearly with time, in accord with Gaussian distribution characteristics. On the basis of this assumption, the probability fields were calculated from every grid point with source strength 1. Using these probability fields and emission retes, the potential contributions of upstream sources along the trajectories were estimated. The results of this study indicate that the application of trajectory modeling is useful in investigating the quantitative relationship between source and receptor regions.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.15-16
• /
• 2015

Measuring sensor, equipment, ICT facilities and their software have relatively short life time comparing to constructional structure so that we should exchange or fix them continuously in the process of maintenance and management. In this paper, we propose a novel design of integrated maintenance, management, and measuring monitoring system applying the concept of mobile cloud. For the sake of disaster prevention for constructional structures such as bridge, tunnel, and other traditional buildings in the village of local heritage, we analyze status of these structures in the long term or short term period as well as disaster situations. Collecting data based on mobile cloud and analyzing future expectations based on probabilistic and statistical techniques, we implement our integrated monitoring system for constructional structures to solve these existing problems. Final results of this design and implementation are basically applied to the monitoring system for more than 10,000 structures spread over national land in Korea. In addition, we can specifically apply the monitoring system presented here to a bridge of timber structure in Asan Oeam Village and a traditional house in Andong Hahoe Village to watch them from possible disasters. Total procedure of system design and implementation as well as development of the platform LinkSaaS and application services of monitoring functions implemented on the platform. We prove a good performance of our system by fulfilling TTA authentication test, web accommodation test, and operation test using real measuring data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1996.09a
• /
• pp.21-29
• /
• 1996

중국과 한반도와의 해상교통은 기나긴 역사의 물줄기의 흘러온다. 일찍이 서기 8-9세기 당과 신라간에 있었던 우호적인 린방항해는 역사상 전성기를 이루었다 이글은 중국 한반도와 일본의 상관 고대문헌을 고찰한 기초상에서 청해진(오늘의 한국완도) 장보고(Znang Bao-gao) 대사를 대표로한 신라인들이 당나라에 대한 항해활동 및 그활동이 남겨둔 역사의 자적을 연구함으로서 당시 당과 신라간의 주요한 해상교통선을 논증하였다 본 연구는 아래와 같이 지적하고 있다 1. 장보고는 서기 8-9세기 신라 항해역사상 아주 큰 영향력을 가진 대표인물로서 그는 이시기 동북아시아 항해활동에 역사적 공헌하였다 그가 오늘날 한국완도 및 중국 산동반도 등의 지역에 남긴 유적 들은 중국과 한국 및 전체 한반도 교통연구에 고귀한 문화재로 중시받을 가치를 지닌다. 2. 서기 8-9세기 신라와 당간 해상교통 노선을 쌍방 항해사들이 장기간의 왕래와 합작의 산물이며 이는 구체적으로 북항로 중항로와 남항로등 세갈래 중요 항로로 나누어진다 그가운데: --- 중국 요령 연해로부터 신라에 도달하는 북항로는 역사가 영구한 전통성 항로인데 항해가 안전하지만 항로가 비교적 길다 --- 중국 산동반도로부터 신라에 이르는 중하로는 당시 쌍방 해상 왕래에 매우 중요한 항로로써 장보고 등 신라 항해사들이 중국과 왕래하던 주요항로이다 ---중국 강소와 절강 연해로부터 신라에 이르는 남항로는 기본적으로 중항로가 남쪽으로서의 영신혹은 추동된 것으로서 그 왕래하던 시기는 당나라 이후 중국 송나라 시기인데 서기 10세기 이후이다.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.39-58
• /
• 2006

This study reviews recent shell midden studies in Korea. With more interest in biological materials, recent shell midden studies have attempted to reconstruct palaeoenvironment, and understand subsistence economy, the formation processes and function of sites and past culture. Especially, one of the major topics in prehistoric Korean shell midden studies is the transitional process from hunter-gatherer to farmer. To solve these questions related with shell middens, new sampling strategies and excavation techniques have been adopted. Analytical methods combined with scientifical technologies also have been introduced to shell middle studies. These methods indude stable isotope analyses(Oxygen isotope and Carbon and Nitrogen isotope analyses) and growth-line analysis, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.154-168
• /
• 2021

Various types of wooden relics are being unearthed following the full-scale excavation in Wolseong palace site, Gyeongju in Korea. In particular, a large number of relics were found in the moat surrounding the Wolseong Fortress. This study attempted to secure basic data on the shields of the Silla era through species identification, radiocarbon dating, and shape analysis of the two wooden shields excavated from the Wolseong moat. As a result of the radiocarbon dating, it was confirmed that the shields were made of wood procured in the period between the mid-4th century and the early 5th century. The species identification confirmed that the body of the relic was made with Pinus soft pine group and the handle with Zelkova serrata. It was also confirmed that the excavated wooden shield was made by first marking a thin line on a flat grain board, then marking double concentric circles and perforating small holes. The distance between the division lines is constant at about 6cm, and spaces between them are colored in red and black. The shape analysis estimated that two artifacts were more than 50cm and 36cm in width, respectively.

• Applied Microscopy
• /
• v.35 no.2
• /
• pp.89-96
• /
• 2005

The ultrastructures of the fertilized egg envelope from Hyphessobrycon serpae belonging to Characidae was studied using scanning and transmission electron microscopes to get systematic fundamental data for classification of species and to confirm whether micropyle is a common trait of Characidae or not. The fertilized egg was of colorless, transparent, spherical, adhesive and demersal type. There were not oil droplets in vitelline membrane and attached structures in the outside of fertilize egg envelope. The egg envelope had a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 13 to 15 protruded lines of the egg envelope in a radiated form. The outer surface of fertilized egg envelope was covered by reticular adhesive fibrous structures and irregularly arranged by pore canals. The fertilized egg envelope consisted of three distinct layers an outer adhesive fibrous layer with high electron density, a middle layer with pore canals, and an inner layer consisting of 6 to 7 lamellae alternating layers with interlamellae of lower electron density. These ultrastructural characters of fertilized egg envelope form Hyphessobrycon serpae can be utilized in taxonomy of teleost, and as fundamental data for study on early development of fertilized egg. It seems that the morphology of micropyle is a common trait of Characidae

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.163-179
• /
• 2011

This study was to identify the material characteristics and provenance of the crucibles, potteries and roof tiles from the Wonsinheungdong site in Daejeon, Korea. Similar mineral composition of each samples showed by microscopic observation and X-ray diffraction analysis. However, wall thickness and mineral characterization of each ceramic artifacts are quite different. The pottery is characterized by thin wall with 0.5 to 0.7 cm and fine grained clay matrix. While the crucible and roof tile has thick wall with 1.3 to 2.5 cm, poorly sorted texture of many quarz, orthoclase and plagioclase whithin ceramic fabric. And large elonagated voids formed by hydrocarbone of straw during the firing and loose matrix obseved in crucible. All ceramic samples and ground soil of the site show similar mineralogical characteristics geochemical behavior and clay-mineralization degree. This indicates making that the soil is probable to be a raw material of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 to $950^{\circ}C$ but hardest pottery fired high temperature between 1,050 to $1,150^{\circ}C$. The vitreous molten materials interpreted in slag included segregation of copper and tin. But it can not exclude the possibility that the glass molten material because observed reddish and greenish vitreous fine structure under microscopic.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.161-168
• /
• 2011

The heating, ventilating, air conditioning (HVAC) system is a very important part of an automotive vehicle: it controls the microclimate inside the passenger's compartment and removes the frost or mist that is produced in cold/rainy weather. In this study, the numerical analysis of the defrost duct in an HVAC system and the de-icing pattern is carried out using commercial CFX-code. The mass flow distribution and flow structure at the outlet of the defrost duct satisfied the duct design specification. For analyzing the de-icing pattern, additional grid generation of solid domain of ice and glass is pre-defined for conductive heat transfer. The flow structure near the windshield, streakline, and temperature fields clearly indicate that the de-icing capacity of the given defrost duct configuration is excellent and that it can be operated in a stable manner. In this paper, the unsteady changes in temperature, water volume fraction, and static enthalpy at four monitoring points are discussed.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.413-430
• /
• 2007

This study analyzed the foreign substances in waterlogged archaeological woods and compounds in soil where waterlogged archaeological wood was buried, in order to examine the relationship between burial environment and foreign substances in waterlogged archaeological wood. The XRF(X-ray Fluorescence Spectroscopy) and EDX(Energy Dispersive X-ray) analysis were conducted to examine the effect of iron(Fe) to blacken the waterlogged wood. The XRF results showed that investigated soil contained Si, Al, and Fe. Wood ash contained more sulfur and Fe than any other elements in the EDX analysis. Cellulose and hemicellulose were significantly reduced at the surface of wood, which is the blackened part of waterlogged wood. Foreign substances changed the surface color. These problems could be solved by removal of foreign substances in waterlogged archaeological wood using EDTA(Ethylene Diamine Tetra Acetic acid). The optimum condition to remove Fe from waterlogged wood by EDTA was investigated. To do this, the concentration of Fe removed was measured with various concentration of EDTA-2Na. The optimum pH of EDTA-2Na was figured to be 4.1 to 4.3. As the concentration of EDTA increased, the extracted concentration of Fe also increased. In the case of 0.4 wt% of EDTA-2Na, about 60ppm of Fe was eliminated and was stabilized after 48 hours. In the case of EDTA-3Na, the optimum pH was 7 to 8, and about 10 ppm of Fe was eliminated at 0.4 wt% of EDTA-3Na. In the case of EDTA-4Na, the optimum pH was 10 to 11, and about 20 ppm of Fe was eliminated at 0.4 wt% of EDTA-4Na. In conclusion, the iron(Fe) in waterlogged archaeological wood was removed by EDTA treatment and it increased the whiteness of the surface.