• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.2
• /
• pp.51-58
• /
• 2019

Purpose In in-vitro laboratories of nuclear medicine department, when the reagent lot or reagent lot changes Comparability test or parallel test is performed to determine whether the results between lots are reliable. The most commonly used standard domestic laboratories is to obtain %difference from the difference in results between two lots of reagents, and then many laboratories are set the standard to less than 20% at low concentrations and less than 10% at medium and high concentrations. If the range is deviated from the standard, the test is considered failed and it is repeated until the result falls within the standard range. In this study, several tests are selected that are performed in nuclear medicine in-vitro laboratories to analyze parallel test results and to establish criteria for customized percent difference for each test. Materials and Methods From January to November 2018, the result of parallel test for reagent lot change is analyzed for 7 items including thyroid-stimulating hormone (TSH), free thyroxine (FT4), carcinoembryonic antigen (CEA), CA-125, prostate-specific antigen (PSA), HBs-Ab and Insulin. The RIA-MAT 280 system which adopted the principle of IRMA is used for TSH, FT4, CEA, CA-125 and PSA. TECAN automated dispensing equipment and GAMMA-10 is used to measure insulin test. For the test of HBs-Ab, HAMILTON automated dispensing equipment and Cobra Gamma ray measuring instrument are used. Separate reagent, customized calibrator and quality control materials are used in this experiment. Results 1. TSH [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [14.8 / 4.4 / 3.7 / 0.0 ] C-2(middle concentration) [10.1 / 4.2 / 3.7 / 0.0] 2. FT4 [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [10.0 / 4.2 / 3.9 / 0.0] C-2(high concentration) [9.6 / 3.3 / 3.1 / 0.0 ] 3. CA-125 [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [9.6 / 4.3 / 4.3 / 0.3] C-2(high concentration) [6.5 / 3.5 / 4.3 / 0.4] 4. CEA [%diffrence Max / Mean / median] (P-value by t-test > 0.05) C-1(low concentration) [9.8 / 4.2 / 3.0 / 0.0] C-2(middle concentration) [8.7 / 3.7 / 2.3 / 0.3] 5. PSA [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(low concentration) [15.4 / 7.6 / 8.2 / 0.0] C-2(middle concentration) [8.8 / 4.5 / 4.8 / 0.9] 6. HBs-Ab [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [9.6 / 3.7 / 2.7 / 0.2] C-2(high concentration) [8.9 / 4.1 / 3.6 / 0.3] 7. Insulin [%diffrence Max / Mean / Median] (P-value by t-test > 0.05) C-1(middle concentration) [8.7 / 3.1 / 2.4 / 0.9] C-2(high concentration) [8.3 / 3.2 / 1.5 / 0.1] In some low concentration measurements, the percent difference is found above 10 to nearly 15 percent in result of target value calculated at a lower concentration. In addition, when the value is measured after Standard level 6, which is the highest value of reagents in the dispensing sequence, the result would have been affected by a hook effect. Overall, there was no significant difference in lot change of quality control material (p-value>0.05). Conclusion Variations between reagent lots are not large in immunoradiometric assays. It is likely that this is due to the selection of items that have relatively high detection rate in the immunoradiometric method and several remeasurements. In most test results, the difference was less than 10 percent, which was within the standard range. TSH control level 1 and PSA control level 1, which have low concentration target value, exceeded 10 percent more than twice, but it did not result in a value that was near 20 percent. As a result, it is required to perform a longer period of observation for more homogenized average results and to obtain laboratory-specific acceptance criteria for each item. Also, it is advised to study observations considering various variables.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.1-41
• /
• 1988

For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

• Korean Journal of Agricultural Science
• /
• v.4 no.2
• /
• pp.254-282
• /
• 1977

To obtain information on the inheritance of the quantitative characters related with the vegetative and reproductive growth of rice, the $F_1$ seeds were obtained in 1974 from the all possible combinations of the diallel crosses among five leading rice varieties : Nongbaek, Tongil, Palgueng, Mangyeong and Gimmaze. The $F_1$'s including reciprocals and parents were grown under the standard cultivation method at Chungnam Provincial Office of Rural Development in 1975. The arrangement of experimental plots was randomized block design with 3 replications and 12 characters were used for the analysis. Analytical procedure for genetic components was followed the Griffing's and Hayman's methods and the results obtained are summarized as follows. 1. In all $F_1$'s of Tongil crosses, the longer duration to heading was due to dominant effect of Tongil and each $F_1$ showed high heterosis in delaying the heading time. It was assumed that non-allelic gene action besides dominant gene effect might be involed in days to heading character. However, in all $F_1$'s from the crosses among parents excluding Tongil the shorter duration was due to dominant gene action and the degree of dominance was partial, since dominance effects were not greater than the additive effect. The non-allelic gene interaction was not significant. Considering the results mentioned above, it was regarded that there were two kinds of Significantly different genetic systems in the days to heading. 2. The rate of heterosis was significantly different depending upon the parents used in the crosses. For instance, the $F_1$'s from Togil cross showed high rate of heterosis in longer culm. Compared to short culm, longer culm was due to recesive gene action and short culm was due to recesive gene action. The dominant gene effect was greater than the additive gene effect in culm length. The narrow sense of heretability was very low and the maternal effects as well as reciprocal effects were significantly recognized. 3. The lenght of the of the uppermost internode of each $F_1$ plant was a little lorger than these of respective parental means or same as those of parents having long internodes, indicating partial dominance in the direction of lengthening the uppermost internodes. The additive gene effects on the uppermost internode was greater than the dominance gene effect. The narrow as well as broad sense of heritabilities for the character of the uppermost internode were very high. There were significant maternal and reciprocal effect in the uppermost internode. 4. The gene action for the flag leaf angle was rather dominance in a way of getting narrower angle. However, in the Palgueng combinations, heterosis of $F_1$ was observed in both narrow and wide angles of the flag leaf. The dominant effects were greater than the additive effects on the flag leaf angle. There were observed also a great deal of non-allelic gene interacticn on the inheritance of the flag leaf angle. 5. Even though the dominant gene action on the length and width of flag leaf was effective in increasing the length or width of the flag leaf, there were found various degrees of hetercsis depending upon the cross combination. Over-dominant gene effect were observed in the inheritance of length of the flag leaf, while additive gene effects was found in the inheritance of the width of the flag leaf. High degree of heretabilities, either narrow or broad sense, were found in both length and width of the flag leaf. No maternal and reciprocal effect were found in both characters. 6. When Tongil was used as one parent in the cross, the length of panicle of $F_1$'s was remarkedly longer than that of parents. In other cross comination, the length of panicle of $F_1$'s was close to the parental mean values. Rather greater dominent gene effect than additive gene effect was observed in the inheritance of panicle length and the dominant gene was effective in increasing the panicle length. 7. The effect of dominant genes was effective in increasing the number of panicles. The degree of heterosis was largely dependent on the cross combination. The effect of dominant gene in the inheritance of panicle number was a little greater than that of additive genes, and the inheritance of panicle number was assumed to be due to complete dominant gene effects. Significantly high maternal and reciprocal effects were found in the character studied. 8. There were minus and plus values of heterosis in the kernel number per panicle depending upon the cross combination. The mean dominant effect was effective in increasing the kernel number per panicle, the degree of dominant effect varied with cross combination. The dominant gene effect and non-allelic gene interaction were found in the inheritance of the kernel number per panicle. 9. Genetic studies were impossible for the maturing ratio, because of environmental effects such as hazards delaying heads. The dominant gene effect was responsible for improving the maturing ratio in all the cross combinations excluding Tongil 10. The heavier 1000 grain weight was due to dominant gene effects. The additive gene effects were greater than the dominant gene effect in the 1000 grain weight, indicating that partial dominance was responsible for increasing the 1000 grain weight. The heritabilites, either narrow or broad sense of, were high for the grain weight and maternal or reciprocal effects were not recognized. 11. When Tongil was used as parent, the straw weight was showing high heterosis in the direction of increasing the weight. But in other crosses, the straw weight of $F_1$'s was lower than those of parental mean values. The direction of dominant gene effect was plus or minus depending upon the cross combinations. The degree of dominance was also depending on the cross combination, and apparently high nonallelic gene interaction was observed.

• Journal of Korean Society of Forest Science
• /
• v.21 no.1
• /
• pp.1-34
• /
• 1974

The author intended to investigate external and internal changes in the cone structure, changes in water content, sugar, fat and protein during the period of seed maturation which bears a proper germinability. The experimental results can be summarized as in the following. 1. Male flowers 1) Pollen-mother cells occur as a mass from late in April to early in May, and form pollen tetrads through meiosis early and middle of May. Pollen with simple nucleus reach maturity late in May. 2) Stamen number of a male flower is almost same as the scale number of cone and is 69-102 stamens. One stamen includes 5800-7300 pollen. 3) The shape is round and elliptical, both of a pollen has air-sac with $80-91{\mu}$ in length, and has cuticlar exine and cellulose intine. 4) Pollen germinate in 68 hours at $25^{\circ}C$ with distilled water of pH 6.0, 2% sugar and 0.8% agar. 2. Female flowers 1) Ovuliferous scales grow rapidly in late April, and differentiation of ovules begins early in May. Embryo-sac-mother cells produce pollen tetrads through meiosis in the middle of May, and flower in late May. 2) The pollinated female flowers show repeated divisions of embryo-sac nucleus, and a great number of free nuclei form a mass for overwintering. Morphogenesis of isolation in the mass structure takes place from the middle of March, and that forms albuminous bodies of aivealus in early May. 3. Formation of pollinators and embryos. 1) Archegonia produce archegonial initial cells in the middle and late April, and pollinators are produced in the late April and late in early May. 2) After pollination, Oespore nuclei are seen to divide in the late May forming a layer of suspensor from the diaphragm in early June and in the middle of June. Thus this happens to show 4 pro-embryos. The organ of embryos begins to differentiate 1 pro-embryo and reachs perfect maturation in late August. 4. The growth of cones 1) In the year of flowering, strobiles grow during the period from the middle of June to the middle of July, and do not grow after the middle of August. Strobiles grow 1.6 times more in length 3.3 times short in diameter and about 22 times more weight than those of female flower in the year of flowering. 2) The cones at the adult stage grow 7 times longer in diameter, 12-15 times shorter diameter than those of strobiles after flowering. 3) Cone has 96-133 scales with the ratio of scale to be 69-80% and the length of cone is 11-13cm. Diameter is 5-8cm with 160-190g weight, and the seed number of it is 90-150 having empty seed ratio of 8-15%. 5. Formation of seed-coats 1) The layers of outer seed-coat become most for the width of $703{\mu}$ in the middle of July. At the adult stage of seed, it becomes $550-580{\mu}$ in size by decreasing moisture content. Then a horny and the cortical tissue of outer coats become differentiated. 2) The outer seed-coat of mature seeds forms epidermal cells of 3-4 layers and the stone cells of 16-21 layers. The interior part of it becomes parenchyma layer of 1 or 2 rows. 3) Inner seed-coat is formed 2 months earlier than the outer seed-coat in the middle of May, having the most width of inner seed-coat $667{\mu}$. At the adult stage it loses to $80-90{\mu}$. 6. Change in moisture content After pollination moisture content becomes gradually increased at the top in the early June and becomes markedly decreased in the middle of August. At the adult stage it shows 43~48% in cone, 23~25% in the outer seed-coat, 32~37% in the inner seed-coat, 23~26% in the inner seed-coat and endosperm and embryo, 21~24% in the embryo and endosperm, 36~40% in the embryos. 7. The content compositions of seed 1) Fat contents become gradually increased after the early May, at the adult stage it occupies 65~85% more fat than walnut and palm. Embryo includes 78.8% fat, and 57.0% fat in endosperm. 2) Sugar content after pollination becomes greatly increased as in the case of reducing sugar, while non-reducing sugar becomes increased in the early June. 3) Crude protein content becomes gradually increased after the early May, and at the adult stage it becomes 48.8%. Endosperm is made up with more protein than embryo. 8. The test of germination The collected optimum period of Pinus koraiensis seeds at an adequate maturity was collected in the early September, and used for the germination test of reduction-method and embryo culture. Seeds were taken at the interval of 7 days from the middle of July to the middle of September for the germination test at germination apparatus.

• Journal of Information Management
• /
• v.6 no.5
• /
• pp.131-134
• /
• 1973

본고(本稿)시리이즈의 제1보(第一報)에서 우리는 물리(物理), 사회과학(社會科學) 및 공학분야(工學分野)의 12,442명(名)의 과학자(科學者)와 기술자(技術者)에 대한 정보교환활동(情報交換活動)의 78례(例)에 있어서 일반과정(一般過程)과 몇 가지 결과(結果)를 기술(記述)한 바 있다. 4년반(年半) 이상(以上)의 기간(其間)($1966{\sim}1971$)에서 수행(遂行)된 이 연구(硏究)는 현재(現在)의 과학지식(科學知識)의 집성체(集成體)로 과학자(科學者)들이 연구(硏究)를 시작(始作)한 때부터 기록상(記錄上)으로 연구결과(硏究結果)가 취합(聚合)될 때까지 각종(各種) 정형(定形), 비정형(非定形) 매체(媒體)를 통한 유통정보(流通情報)의 전파(傳播)와 동화(同化)에 대한 포괄적(包括的)인 도식(圖式)으로 표시(表示)할 수 있도록 설정(設定)하고 또 시행(施行)되었다. 2보(二報), 3보(三報), 4보(四報)에서는 데이터 뱅크에 수집(蒐集) 및 축적(蓄積)된 데이터의 일반적(一般的)인 기술(記述)을 적시(摘示)하였다. (1) 과학(科學)과 기술(技術)의 정보유통(情報流通)에 있어서 국가적(國家的) 회합(會合)의 역할(役割)(Garvey; 4보(報)) 국가적(國家的) 회합(會合)은 투고(投稿)와 이로 인한 잡지중(雜誌中) 게재간(揭載間)의 상대적(相對的)인 오랜 기간(期間)동안 이러한 연구(硏究)가 공개매체(公開媒體)로 인하여 일시적(一時的)이나마 게재여부(揭載如否)의 불명료성(不明瞭性)을 초래(招來)하기 전(前)에 과학연구(科學硏究)의 초기전파(初期傳播)를 위하여 먼저 행한 주요(主要) 사례(事例)와 마지막의 비정형매체(非定形媒體)의 양자(兩者)를 항상 조직화(組織化)하여 주는 전체적(全體的)인 유통과정(流通過程)에 있어서 명확(明確)하고도 중요(重要)한 기능(機能)을 갖는다는 것을 알 수 있었다. (2) 잡지(雜誌)에 게재(揭載)된 정보(情報)의 생산(生産)과 관련(關聯)되는 정보(情報)의 전파과정(傳播過程)(Garvey; 1보(報)). 이 연구(硏究)를 위해서 우리는 정보유통과정(情報流通過程)을 따라 많은 노력(努力)을 하였는데, 여기서 유통과정(流通過程)의 인상적(印象的)인 면목(面目)은 특별(特別)히 연구(硏究)로부터의 정보(情報)는 잡지(雜誌)에 게재(揭載)되기까지 진정으로는 공개적(公開的)이 못된다는 것과 이러한 사실(事實)은 선진연구(先進硏究)가 자주 시대(時代)에 뒤떨어지게 된다는 것을 발견할 수 있었다. 경험(經驗)이 많은 정보(情報)의 수요자(需要者)는 이러한 폐물화(廢物化)에 매우 민감(敏感)하며 자기(自己) 연구(硏究)에 당면한, 진행중(進行中)이거나 최근(最近) 완성(完成)된 연구(硏究)에 대하여 정보(情報)를 얻기 위한 모든 수단(手段)을 발견(發見)코자 하였다. 예를 들어, 이들은 잡지(雜誌)에 보문(報文)을 발표(發表)하기 전(前)에 발생(發生)하는 정보전파과정(情報傳播過程)을 통하여 유루(遺漏)될지도 모르는 정보(情報)를 얻기 위하여 한 잡지(雜誌)나 2차자료(二次資料) 또는 전형적(典型的)으로 이용(利用)되는 다른 잡지류중(雜誌類中)에서 당해정보(當該情報)가 발견(發見)되기를 기다리지 않는다는 것이다. (3) "정보생산 과학자(情報生産 科學者)"에 의한 정보전파(情報傳播)의 계속성(繼續性)(이 연구(硏究) 시리이즈의 결과(結果)는 본고(本稿)의 주내용(主內容)으로 되어 있다.) 1968/1969년(年)부터 1970/1971년(年)의 이년기간(二年期間)동안 보문(報文)을 낸 과학자(科學者)(1968/1969년(年) 잡지중(雜誌中)에 "질이 높은" 보문(報文)을 발표(發表)한)의 약 2/3는 1968/1969의 보문(報文)과 동일(同一)한 대상영역(對象領域)의 연구(硏究)를 계속(繼續) 수행(遂行)하였다. 그래서 우리는 본연구(本硏究)에 오른 대부분(大部分)의 저자(著者)가 정상적(正常的)인 과학(科學), 즉 연구수행중(硏究遂行中) 의문(疑問)에 대한 완전(完全)한 해답(解答)을 얻게 되는 가장 중요(重要)한 추구(追求)로서 Kuhn(제5보(第5報))에 의하여 기술(技術)된 방법(방법)으로 과학(연구)(科學(硏究))을 실행(實行)하였음을 알았다. 최근(最近)에 연구(硏究)를 마치고 그 결과(結果)를 보문(報文)으로서 발표(發表)한 이들 과학자(科學者)들은 다음 단계(段階)로 해야 할 사항(事項)에 대하여 선행(先行)된 동일견해(同一見解)를 가진 다른 연구자(硏究자)들의 연구(硏究)와 대상(對象)에 밀접(密接)하게 관련(關聯)되고 있다. 이 계속성(繼續性)의 효과(效果)에 대한 지표(指標)는 보문(報文)과 동일(同一)한 영역(領域)에서 연구(硏究)를 계속(繼續)한 저자(著者)들의 약 3/4은 선행(先行) 보문(報文)에 기술(技術)된 연구결과(硏究結果)에서 직접적(直接的)으로 새로운 연구(硏究)가 유도(誘導)되었음을 보고(報告)한 사항(事項)에 반영(反映)되어 있다. 그렇지만 우리들의 데이터는 다음 영역(領域)으로 기대(期待)하지 않은 전환(轉換)을 일으킬 수도 있음을 보여주고 있다. 동일(同一) 대상(對象)에서 연구(硏究)를 속행(續行)하였던 저자(著者)들의 1/5 이상(以上)은 뒤에 새로운 영역(領域)으로 연구(硏究)를 전환(轉換)하였고 또한 이 영역(領域)에서 연구(硏究)를 계속(繼續)하였다. 연구영역(硏究領域)의 이러한 변화(變化)는 연구자(硏究者)의 일반(一般) 정보유통(情報流通) 패턴에 크게 변화(變化)를 보이지는 않는다. 즉 새로운 지적(知的) 문제(問題)에 대한 변화(變化)에서 야기(惹起)되는 패턴에 있어서 저자(著者)들은 오래된 문제(問題)의 방법(方法)과 기술(技術)을 새로운 문제(問題)로 맞추려 한다. 과학사(科學史)의 최근(最近) 해석(解釋)(Hanson: 6보(報))에서 예기(豫期)되었던 바와 같이 정상적(正常的)인 과학(科學)의 계속성(繼續性)은 항상 절대적(絶對的)이 아니며 "과학지식(科學知識)"의 첫발자욱은 예전 연구영역(硏究領域)의 대상(對象)에 관계(關係)없이 나타나는 다른 영역(領域)으로 내딛게 될지도 모른다. 우리들의 연구(硏究)에서 저자(著者)의 1/3은 동일(同一) 영역(領域)의 대상(對象)에서 속계적(續繼的)인 연구(硏究)를 수행(遂行)치 않고 새로운 영역(領域)으로 옮아갔다. 우리는 이와 같은 데이터를 (a) 저자(著者)가 각개과학자(各個科學者)의 활동(活動)을 통하여 집중적(集中的)인 과학적(科學的) 노력(努力)을 시험(試驗)할 때 각자(各自)의 연구(硏究)에 대한 많은 양(量)의 계속성(繼續性)이 어떤 진보중(進步中)의 과학분야(科學分野)에서도 나타난다는 것과 (b) 이 계속성(繼續性)은 과학(科學)에 대한 집중적(集中的) 진보(進步)의 필요적(必要的) 특질(特質)이라는 것을 의미한다. 또한 우리는 이 계속성(繼續性)과 관련(關聯)되는 유통문제(流通問題)라는 새로운 대상영역(對象領域)으로 전환(轉換)할 때 연구(硏究)의 각단계(各段階)의 진보(進步)와 새로운 목적(目的)으로 전환시(轉換時) 양자(兩者)가 다 필요(必要)로 하는 각개(各個) 과학자(科學者)의 정보수요(情報需要)를 위한 시간(時間) 소비(消費)라는 것을 탐지(探知)할 수 있다. 이러한 관찰(觀察)은 정보(情報)의 선택제공(選擇提供)시스팀이 현재(現在) 필요(必要)로 하는 정보(情報)의 만족(滿足)을 위하여는 효과적(效果的)으로 매우 융통성(融通性)을 띠어야 한다는 것을 암시(暗示)하는 것이다. 본고(本稿)의 시리이즈에 기술(記述)된 전정보유통(全情報流通) 과정(過程)의 재검토(再檢討) 결과(結果)는 과학자(科學者)들이 항상 그들의 요구(要求)를 조화(調和)시키는 신축성(伸縮性)있는 유통체제(流通體制)를 발전(發展)시켜 왔다는 것을 시사(示唆)해 주고 있다. 이 시스팀은 정보전파(情報傳播) 사항(事項)을 중심(中心)으로 이루어 지며 또한 이 사항(事項)의 대부분(大部分)의 참여자(參與者)는 자기자신(自己自身)이 과학정보(科學情報) 전파자(傳播者)라는 기본적(基本的)인 정보전파체제(情報傳播體制)인 것이다. 그러나 이 과정(過程)의 유통행위(流通行爲)에서 살펴본 바와 같이 우리는 대부분(大部分)의 정보전파자(情報傳播者)가 역시 정보(情報)의 동화자(同化者)-다시 말해서 과학정보(科學情報)의 생산자(生産者)는 정보(情報)의 이용자(利用者)라는 것을 알 수 있다. 이 연구(硏究)에서 전형적(典型的)인 과학자((科學者)는 과학정보(科學情報)의 생산(生産)이나 전파(傳播)의 양자(兩者)에 연속적(連續的)으로 관계(關係)하고 있음을 보았다. 만일(萬一) 연구자(硏究者)가 한 편(編)의 연구(硏究)를 완료(完了)한다면 이 연구자(硏究者)는 다음에 무엇을 할 것이냐 하는 관념(觀念)을 갖게 되고 따라서 "완료(完了)된" 연구(硏究)에 관한 정보(情報)를 이용(利用)하여 동시(同時)에 새로운 일을 시작(始作)하게 된다. 예를 들어, 한 과학자(科學者)가 동일(同一) 영역(領域)의 다른 동료연구자(同僚硏究者)에게 완전(完全)하며 이의(異議)에 방어(防禦)할 수 있는 보고서(報告書)를 제공(提供)할 수 있는 단계(段階)에 도달(到達)하였다면 우리는 이 과학자(科學者)가 정보유통과정(情報流通過程)에서 많은 역할(役割)을 해낼 수 있다는 것을 알 것이다. 즉 이 과학자(科學者)는 다른 과학자(科學者)들에게 최신(最新)의 과학적(科學的) 결과(結果)를 제공(提供)할 때 하나의 과학정보(科學情報) 전파자(傳播者)가 되며, 이 연구(硏究)의 의의(意義)와 타당성(妥當性)에 관한 논평(論評)이나 비평(批評)을 동료(同僚)로부터 구(求)하는 관점(觀點)에서 보면 이 과학자(科學者)는 하나의 정보탐색자(情報探索者)가 된다. 또한 장래(將來)의 이용(利用)을 위하여 증정(贈呈)이나 동화(同化)한 이 정보(情報)로부터 피이드백을 받아 드렸을 때의 범주(範疇)에서 보면 (잡지(雜誌)에 투고(投稿)하기 위하여 원고(原稿)를 작성(作成)하는 경우에 있어서와 같이) 과학자(科學者)는 하나의 정보이용자(情報利用者)가 되고 이러한 모든 가능성(可能性)에서 정보생산자(情報生産者)는 다음 정보생산(情報生産)에 이미 들어가 있다고 볼 수 있다(저자(著者)들의 2/3는 보문(報文)이 게재(揭載)되기 전(前)에 이미 새로운 연구(硏究)를 시작(始作)하였다). 과학자(科學者)가 자기연구(自己硏究)를 마치고 예비보고서(豫備報告書)를 만든 후(後) 자기연구(自己硏究)에 관한 정보(情報)의 전파(傳播)를 계속하게 되는데 이와 관계(關係)되는 일반적(一般的)인 패턴을 보면 소수(少數)의 동료(同僚)그룹에 출석(出席)하는 경우 (예로 지역집담회)(地域集談會))와 대중(大衆) 앞에서 행(行)하는 경우(예로 국가적 회합(國家的 會合)) 등이 있다. 그러는 동안에 다양성(多樣性) 있는 성문보고서(成文報告書)가 이루어진다. 그러나 과학자(科學者)들이 자기연구(自己硏究)를 위한 주정보전파목표(主情報傳播目標)는 과학잡지중(科學雜誌中)에 게재(揭載)되는 보문(報文)이라는 것이 명확(明確)한 사실(事實)인 것이다. 이러한 목표(目標)에 도달(到達)할 때까지의 각(各) 정보전파단계(情報傳播段階)에서 과학자(科學者)들은 목표달성(目標達成)을 위하여 청중(聽衆), 자기동화(自己同化)된 정보(情報) 및 이미 이용(利用)된 정보(情報)로부터 피이드백을 탐색(探索)하게 된다. 우리가 본고(本稿)의 시리이즈중(中)에 표현(表現)하려 했던 바와 같이 이러한 활동(活動)은 조사수임자(調査受任者)의 의견(意見)이 원고(原稿)에 반영(反映)되고 또 그 원고(原稿)가 잡지게재(雜誌揭載)를 위해 수리(受理)될 때까지 계속적(繼續的)으로 정보(情報)를 탐색(探索)하는 과학자(科學者)나 기타(其他)사람들에게 효과적(效果的)이었다. 원고(原稿)가 수리(受理)되면 그 원고(原稿)의 저자(著者)들은 그 보문(報文)의 주내용(主內容)에 대하여 적극적(積極的)인 정보전파자(情報傳播者)로서의 역할(役割)을 종종 중지(中止)하는 일이 있는데 이때에는 저자(著者)들의 역할(役割)이 변화(變化)하는 것을 볼 수 있었다. 즉 이 저자(著者)들은 일시적(一時的)이긴 하나 새로운 일을 착수(着手)하기 위하여 정보(情報)의 동화자(同化者)를 찾게 된다. 또한 전(前)에 행한 일에 대한 의견(意見)이나 비평(批評)이 새로운 일에 영향(影響)을 끼치게 된다. 동시(同時)에 새로운 과학정보생산(科學情報生産) 과정(過程)에 들어가게 되고 현재(現在) 진행중(進行中)이거나 최근(最近) 완료(完了)한 연구(硏究)에 대한 정보(情報)를 항상 찾게 된다. 활발(活潑)한 연구(硏究)를 하는 과학자(科學者)들에게는, 동화자(同化者)로서의 역할(役割)과 전파자(傳播者)로서의 역할(役割)을 분리(分離)시킨다는 것은 실제적(實際的)은 못된다. 즉 후자(後者)를 완성(完成)하기 위해서는 전자(前者)를 이용(利用)하게 된다는 것이다. 과학자(科學者)들은 한 단계(段階)에서 한 전파자(傳播者)로서의 역할(役割)이 뚜렷하나 다른 단계(段階)에서는 정보교환(情報交換)이 기본적(基本的)으로 정보동화(情報同化)에 직결(直結)되고 있는 것이다. 정보전파자(情報傳播者)와 정보동화자간(情報同化者間)의 상호관계(相互關係)(또는 정보생산자(情報生産者)와 정보이용자간(情報利用者間))는 과학(科學)에 있어서 하나의 필수양상(必修樣相)이다. 과학(科學)의 유통구조(流通構造)가 전파자(傳播者)(이용자(利用者)로서의 역할(役割)보다는)의 필요성(必要性)에서 볼 때 복잡(複雜)하고 다이나믹한 시스팀으로 구성(構成)된다는 사실(事實)은 과학(科學)의 발전과정(發展過程)에서 필연적(必然的)으로 나타난다. 이와 같은 사실(事實)은 과학정보(科學情報)의 전파요원(傳播要員)이 국가적 회합(國家的 會合)에서 자기연구(自己硏究)에 대한 정보(情報)의 전파기회(傳播機會)를 거절(拒絶)하고 따라서 전파정보(電波情報)를 판단(判斷)하고 선별(選別)하는 것을 감소(減少)시키며 결과적(結果的)으로 잡지(雜誌)나 단행본(單行本)에서 비평(批評)을 하고 추고(推敲)하는 것이 배제(排除)될 때는 유형적(有形的) 과학(科學)은 급속(急速)히 비과학성(非科學性)을 띠게 된다는 것을 Lysenko의 생애(生涯)에 대한 Medvedev의 기술중(記述中)[7]에 지적(指摘)한 것과 관계(關係)되고 있다.

• Journal of Korean Society of Forest Science
• /
• v.34 no.1
• /
• pp.31-46
• /
• 1977

The study was made to give some helpful information for policy-making on ornamental tree cultivation by doing a survey on general situations, management analysis, and future prospects of the ornamental tree growing. The study was carried out through literature studies related to the subject, questionaire surveys, and on-the-spot investigation. The questionaire surveys could be divided into two parts: pre-questionaire survey and main-questionaire survey. In the pre-questionaire survey, the researchers intended to identify the total number of ornamental tree growers, cultivation areas in size and their locations. The questionaires were sent to each town and county administration authorities, forest cooperatives, and related organizations through-out the nation. The main-questionaires were prepared for detailed study and the questionaires were sent to 200 tree growers selected by option by taking considerations of the number of tree growers and the size of cultivating areas in regions. The main findings and some information obtained in the survey were as follows: 1. The total land for ornamental tree growing was amounted to 1,873.02 hectares and the number of cultivators was totaled to 2,717. 2. The main occupations of the ornamental tree growers were found in horticulture (41.9%), agronomy (25.9%), officialdom (11.3%), animal husbandry (6.5%), business circle(4.8%), and forestry (3.2%) in sequence. 3. The ornamental trees were cultivated mostly upperland (54.8), forest land (19.4%), rice paddy (11.3%) and others. 4. The educational training of the tree growers seemed quite high. The results of the survey indicated that a large number of tree growers was occupied by college graduates (38.7%), and then high school graduates (34.7%), middle school graduates (12.9%) in order. 5. The tree farming was undertaken as a side-job (41.9%) rather than main-job (23.4%), but a few of respondents rated as subsidiary-job (18.6%). 6. The management status classified by the rate of hired labors used was likely to belong to three categories: independant enterprise management (41.9%); half independant management (31.5%); and self-management (32.4%). 7. The majority of the tree growers sold their products to the consumers through middle-man channel (48.4%), or directly to the house-holder and detailers (13.7%), but a few of the respondents answered that they disposed of their products by bidding (11.2%) or by direct selling to the contractors (4.8%). 8. The channel cf marketing seemed somewhat complicated. The results of the survey were as: (1) producers ${\rightarrow}$consumers (22.6%) (2) producers ${\rightarrow}$field middle-men${\rightarrow}$consumers (33.1%) (3) producers ${\rightarrow}$field middle-men${\rightarrow}$first stage brokers${\rightarrow}$consumers (15.3%) (4) producers ${\rightarrow}$field middle-men${\rightarrow}$second stage middle-men${\rightarrow}$brokers${\rightarrow}$consumers (5.7%) (5) producers${\rightarrow}$field middle-men${\rightarrow}$third stage middle-men${\rightarrow}$second stage middlemen${\rightarrow}$brokers${\rightarrow}$consumers (4.8%) 9. It was responded that the margin for each stage of middle-men or brokers was assumed to be 30-50%(33.1%), 20-30%(32.3%), 50-100%(9.7%), and 100-200%(2.4%) in sequence. 10. The difference between the delivery price of consumers and field selling price of the producers seemed quite large. Majority of producers responded that they received half a price compared to the consumer's prices. 11. About two thirds of the respondents opposed to the measure of "Law on Preservation and Utilization of Agricultural Land" in which says that all the ornamental trees grown on flat agricultural lands less than 8 degrees in slope must be transplanted within three years to other places more than 8 degrees in slope. 12. The tree growers said that they have paid rather high land taxes than they ought to pay (38.7%), but come responded that land tax seemed to be appropriate (15.3%), and half of the respondents answered "not known". 13. The measures for the standardization of ornamental trees by size were backed up by a large number of respondents (57.3%), but one third of the respondents showed negative answer (29.8%). 14. About half of the respondents favored the systematic marketing through organization such as forest cooperatives (54%), but quite a few respondents opposed to organizing the systematic marketing channel (36.3%). 15. The necessary measures for permission in ornamental tree cultivation was rejected by a large number of respondents (49.2%) than those of favored (43.6%).

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.239-260
• /
• 2019

This paper examines the circulation and dissemination of painting during and after the nineteenth century through a case study on the One Hundred Fans paintings produced as decorative folding screens at the time. One Hundred Fans paintings refer to depictions of layers of fans in various shapes on which pictures of diverse themes are drawn. Fans and paintings on fans were depicted on paintings before the nineteenth century. However, it was in the nineteenth century that they began to be applied as subject matter for decorative paintings. Reflecting the trend of enjoying extravagant hobbies, fans and paintings on fans were mainly produced as folding screens. The folding screen of One Hundred Fans from the collection of the Museum am Rothenbaum Kulturen und Künste der Welt (hereafter Rothenbaum Museum) in Germany was first introduced to Korean in the exhibition The City in Art, Art in the City held at the National Museum of Korea in 2016. Each panel in this six-panel folding screen features more than five different fans painted with diverse topics. This folding screen is of particular significance since the National Museum of Korea holds the original drawings. In the nineteenth century, calligraphy and painting that had formerly been enjoyed by Joseon royal family members and the nobility in private spaces began to spread among common people and was distributed through markets. In accordance with the trend of adorning households, colorful decorative paintings were preferred, leading to the popularization of the production of One Hundred Fans folding screens with pictures in different shapes and themes. A majority of the Korean collection in the Rothenbaum Museum belonged to Heinrich Constantin Eduard Meyer(1841~1926), a German businessman who served as the Joseon consul general in Germany. From the late 1890s until 1905, Meyer traveled back and forth between Joseon and Germany and collected a wide range of Korean artifacts. After returning to Germany, he sequentially donated his collections, including One Hundred Fans, to the Rothenbaum Museum. Folding screens like One Hundred Fans with their fresh and decorative beauty may have attracted the attention of foreigners living in Joseon. The One Hundred Fans at the Rothenbaum Museum is an intriguing work in that during its treatment, a piece of paper with the inscription of the place name "Donghyeon" was found pasted upside down on the back of the second panel. Donghyeon was situated in between Euljiro 1-ga and Euljiro 2-ga in present-day Seoul. During the Joseon Dynasty, a domestic handicraft industry boomed in the area based on licensed shops and government offices, including the Dohwaseo (Royal Bureau of Painting), Hyeminseo (Royal Bureau of Public Dispensary), and Jangagwon (Royal Bureau of Music). In fact, in the early 1900s, shops selling calligraphy and painting existed in Donghyeon. Thus, it is very likely that the shops where Meyer purchased his collection of calligraphy and painting were located in Donghyeon. The six-panel folding screen One Hundred Fans in the collection of the Rothenbaum Museum is thought to have acquired its present form during a process of restoring Korean artifacts works in the 1980s. The original drawings of One Hundred Fans currently housed in the National Museum of Korea was acquired by the National Folk Museum of Korea between 1945 and 1950. Among the seven drawings of the painting, six indicate the order of their panels in the margins, which relates that the painting was originally an eight-panel folding screen. Each drawing shows more than five different fans. The details of these fans, including small decorations and patterns on the ribs, are realistically depicted. The names of the colors to be applied, including 'red ocher', 'red', 'ink', and 'blue', are written on most of the fans, while some are left empty or 'oil' is indicated on them. Ten fans have sketches of flowers, plants, and insects or historical figures. A comparison between these drawings and the folding screen of One Hundred Fans at the Rothenbaum Museum has revealed that their size and proportion are identical. This shows that the Rothenbaum Museum painting follows the directions set forth in the original drawings. The fans on the folding screen of One Hundred Fans at the Rothenbaum Museum are painted with images on diverse themes, including landscapes, narrative figures, birds and flowers, birds and animals, plants and insects, and fish and crabs. In particular, flowers and butterflies and fish and crabs were popular themes favored by nineteenth century Joseon painters. It is noteworthy that the folding screen One Hundred Fans at the Rothenbaum Museum includes several scenes recalling the typical painting style of Kim Hong-do, unlike other folding screens of One Hundred Fans or Various Paintings and Calligraphy. As a case in point, the theme of "Elegant Gathering in the Western Garden" is depicted in the Rothenbaum folding screen even though it is not commonly included in folding screens of One Hundred Fans or One Hundred Paintings due to spatial limitations. The scene of "Elegant Gathering in the Western Garden" in the Rothenbaum folding screen bears a resemblance to Kim Hong-do's folding screen of Elegant Gathering in the Western Garden at the National Museum of Korea in terms of its composition and style. Moreover, a few scenes on the Rothenbaum folding screen are similar to examples in the Painting Album of Byeongjin Year produced by Kim Hong-do in 1796. The painter who drew the fan paintings on the Rothenbaum folding screen is presumed to have been influenced by Kim Hong-do since the fan paintings of a landscape similar to Sainsam Rock, an Elegant Gathering in the Western Garden, and a Pair of Pheasants are all reminiscent of Kim's style. These paintings in the style of Kim Hong-do are reproduced on the fans left empty in the original drawings. The figure who produced both the original drawings and fan paintings appears to have been a professional painter influenced by Kim Hong-do. He might have appreciated Kim's Painting Album of Byeongjin Year or created duplicates of Painting Album of Byeongjin Year for circulation in the art market. We have so far identified about ten folding screens remaining with the One Hundred Fans. The composition of these folding screens are similar each other except for a slight difference in the number and proportion of the fans or reversed left and right sides of the fans. Such uniform composition can be also found in the paintings of scholar's accoutrements in the nineteenth century. This suggests that the increasing demand for calligraphy and painting in the nineteenth century led to the application of manuals for the mass production of decorative paintings. As the demand for colorful decorative folding screens with intricate designs increased from the nineteenth century, original drawings began to be used as models for producing various paintings. These were fully utilized when making large-scale folding screens with images such as Guo Ziyi's Enjoyment-of-Life Banquet, Banquet of the Queen Mother of the West, One Hundred Children, and the Sun, Cranes and Heavenly Peaches, all of which entailed complicated patterns. In fact, several designs repeatedly emerge in the extant folding screens, suggesting the use of original drawings as models. A tendency toward using original drawings as models for producing folding screens in large quantities in accordance with market demand is reflected in the production of the folding screens of One Hundred Fans filled with fans in different shapes and fan paintings on diverse themes. In the case of the folding screens of One Hundred Paintings, bordering frames are drawn first and then various paintings are executed inside the frames. In folding screens of One Hundred Fans, however, fans in diverse forms were drawn first. Accordingly, it must have been difficult to produce them in bulk. Existing examples are relatively fewer than other folding screens. As discussed above, the folding screen of One Hundred Fans at the Rothenbaum Museum and its original drawings at the National Museum of Korea aptly demonstrate the late Joseon painting trend of embracing and employing new painting styles. Further in-depth research into the Rothenbaum painting is required in that it is a rare example exhibiting the influence of Kim Hong-do compared to other paintings on the theme of One Hundred Fans whose composition and painting style are more similar to those found in the work of Bak Gi-jun.

• Applied Biological Chemistry
• /
• v.21 no.3
• /
• pp.150-184
• /
• 1978

Nutritional characteristics and physio-chemical properties of mycelial growth and fruitbody formation of oyster mushroom(Pleurotus ostreatus)in synthetic media, the curtural condition for the commerical production in the rice straw and poplar sawdust media, and the changes of the chemical components of the media and mushroom during the cultivation were investigated. The results can be summarized as follows: 1. Among the carbon sources mannitol and sucrose gave rapid mycelial growth and rapid formation of fruit-body with higher yield, while lactose and rhamnose gave no mycelial growth. Also, citric acid, succinic acid, ethyl alcohol and glycerol gave poor fruit-body formation, and acetic acid, formic acid, fumaric acid, n-butyl alcohol, n-propyl alcohol and iso-butyl alcohol inhibited mycelial growth. 2. Among the nitrogen sources peptone gave rapid mycelial growth and rapid formation of fruit-body with higher yield, while D,L-alanine, asparatic acid, glycine and serine gave very poor fruit-body formation, and nitrite nitrogens, L-tryptophan and L-tyrosine inhibited mycelial growth. Inorganic nitrogens and amino acids added to peptone were effective for fruit-body growth, and thus addition of ammonium sulfate, ammonium tartarate, D,L-alanine and L-leucine resulted in about 10% increase fruit-body yield. L-asparic acid about 15%, L-arginine about 20%, L-glutamic acid, and L-lysine about 25%. 3. At C/N ratio of 15.23 fruit-body formation was fast, but the yield decreased, and at C/N ratio of 11.42 fruit-body formation was slow, but the yield increased. Also, at the same C/N ratio the higher the concentration of mannitol and petone, the higher yield was produced. Thus, from the view point of both yield of fruit-body and time required for fruiting the optimum C/N ratio would be 30. 46. 4. Thiamine, potassium dihydrogen phosphate and magnecium sulfate at the concentration of $50{\mu}g%$. 0.2% and 0.02-0.03%, respectively, gave excellent mycelial and fruit-body growth. Among the micronutrients ferrous sulfate, zinc sulfate and manganese sulfate showed synergetic growth promoting effect but lack of manganese resulted in a little reduction in mycelial and fruit-body growth. The optimum concentrati on of each these nutrients was 0.02mg%. 5. Cytosine and indole acetic acid at 0.2-1mg% and 0.01mg%, respectively, increased amount of mycelia, but had no effect on yield of fruit-body. The other purine and pyrimidine bases and plant hormones also had no effect on mycelial and fruit-belly yield. 6. Illumination inhibited mycelial growth, but illumination during the latter part of vegetative growth induced primordia formation. The optimum light intensity and exposure time was 100 to 500 lux and 6-12 hours per day, respectively. Higher intensity of light was injurous, and in darkness only vegetative growth without primordia formation was continued. 7. The optimum temperature for mycelial growth was $25^{\circ}C$ and for fruit-body formation 10 to $15^{\circi}C$. The optimum pH range was from 5.0 to 6.5. The most excellent fry it-body formation were produced from the mycelium grown for 7 to 10 days. The lesser the volume of media, the more rapid the formation of fruit-body; and the lower the yield of fruit-body; and the more the volume of media, the slower the formation of fruit-body, and the higher the yield of fruit-body. The primordia formation was inhibited by $CO_2$. 8. The optimum moisture content for mycelial growth was over 70% in the bottle media of rice straw and poplar sawdust. 10% addition of rice bran to the media exhibited excellent mycelial growth and fruit-body formation, and the addition of calciumcarbonate alone was effective, but the addition of calcium carbonate was ineffective in the presence of rice bran. 9. In the cultivation experiments the total yield of mushroom from the rice straw media was $14.99kg/m^2$, and from the sawdust media $6.52kg/m^2$, 90% of which was produced from the first and second cropping period. The total yield from the rice straw media was about 2.3 times as high as that from the sawdust media. 10. Among the chemical components of the media little change was observed in the content of ash on the dry weight basis, and organic matter content decreased as the cultivation progressed. Moisture content, which was about 79% at the time of spawning, decreased a little during the period of mycelial propagation, after which no change was observed. 11. During the period from spawning to the fourth cropping about 16.7% of the dry matter, about 19.3% of organic matter, and about 40% of nitrogen were lost from the rice straw media; about 7.5% of dry mallet, about 7.6% of organic matter, and about 20% of nitrogen were lost from the sawdust media. For the production of 1kg of mushroom about 232g of organic matter and about 7.0g of nitrogen were consumed from the rice straw media; about 235g of organic matter and about 6.8g of nitrogen were consumed from the sawdust media, 1㎏ of mushroom from either of media contains 82.4 and 82.3g of organic matter and 5.6 and 5.4g of nitrogen, respectively. 12. Total nitrogen content of the two media decreased gradually as the cultivation progressed, and total loss of insoluble nitrogen was greater than that of soluble nitrogen. Content of amino nitrogen continued to increase up to the third cropping time, after which it decreased. 13. In the rice straw media 28.0 and 13.8% of the total pentosan and ${\alpha}$-cellulose, respectively, lost during the whole cultivation period was lost during the period of mycelial growth; in the sawdust media 24.1 and 11.9% of the total pentosan and ${\alpha}$-cellulose, respectively, was lost during the period of mycelial growth. Lignin content in the media began to decrease slightly from the second cropping time, while the content of reduced sugar, trehalose and mannitol continued to increase. C/N ratio of the rice straw media decreased from 33.2 at spawining to 30.0 at ending; that of the sawdust media decreased from 61.3 to 60.0. 14. In both media phosphorus, potassium, manganese and zinc decreased, at magnesium, calcium and copper showed irregular changes, and iron had a tendency to be increased. 15. Enzyme activities are much higher in the rice straw media than in the sawdust media. CMC saccharifying and liquefying activity gradually increased from after mycelial propagation to the second cropping, after which it decreased in both media. Xylanase activity rapidly and greatly increased during the second cropping period rather than the first period. At the start of the third cropping period the activity decreased rapidly in the rice straw media, which was not observed in the sawdust media. Protease activity was highest after mycelial propagation, after which it gradually decreased. The pH of the rice straw media decreased from 6.3 at spawning to 5.0 after fourth cropping; that of the sawdust media decreased from 5.7 to 4.9. 16. The contents of all the components except crude fibre of the mushroom from the rice straw media were higher than those from the sawdust media. Little change was observed in the content of the components of mushroom cropped from the first to the third period, but slight decrease was noticed at the fourth cropping.