• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.209-216
• /
• 1999

일반적으로 힘 제어는 힘 센서의 사용 여부에 따라 능동적 힘 제어와 피동적 힘 제어로 분류시킬 수 있다. 능동적 힘 제어는 힘 세서를 이용하여 구속력을 목표한 힘에 근접하도록 제어한다. 유연 매니퓨레이터의 함수(위치, 속도, 가속도)를 이용하여 일정한 힘에 근접하도록 제어한다. 유연 매티퓨레이터에 있어서 링크 선단의 강성 증대는 힘 제어뿐만이 아니라, 링크의 진동을 크게 유발함으로서 위치 제어에 불리하게 작용한다. 주로 사용되고 있는 힘 센서는 많은 변형 게이지(strain gauge)로 구성되어 있다. 유연 매니퓨레이터 또한 링크 선단의 변형을 측정하기 위해 변형 게이지를 사용하고 있다. 본 논문에서는 이점에 착안하여, 유연 매니퓨레이터의 선단의 탄성 변형을 측정하기 위해 장착한 변형 게이지를 이용한 위치/힘 제어를 제안한다. 먼저, 유연 매니퓨레이터의 집중 정수 모델로부터 링크의 탄성 변형과 구속력 관계를 도출한 후 이 관계를 이용하여 3차원 실험 유연 매니퓨레이터를 실시간 위치/힘 제어 실험을 수행하였다. 또한 범용 동력학 해석 소프트웨어인 ADAMS FEM 을 이용하여 해석하였다. 마지막으로, 실험 결과와 해석 결과를 비교 분석하여 본 논문에서 제안한 유연 매니퓨레이터의 위치/힘 제어의 타당성을 입증시켰다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.76-82
• /
• 2000

본 논문에서는 환경에 구속 받는 유연 매니퓨레이터의 힘/위치에 대하여 논하고자 한다. 일반적으로, 유연 매니퓨레이터의 모델링 방법은 분포 정수 모델과 집중 정수 모델로 분류할 수 있다. 전자인 분포 정수 모델을 이용해서는 평면 1 링크, 2 링크를 대상으로 한 위치/힘 제어는 가능하나, 운동 방정식의 복잡성으로 인하여 실시간에서 다 링크 다 관절 유연 매니퓨레이터의 힘/위치를 제어하기는 어렵게 여겨져 왔다. 본 논문에서는 집중 정수 모델링 방법인 집중 스프링 질량 모델(Lumped Spring Mass Model)을 이용하여 환경에 구속받는 유연 매니퓨레이터의 운동 방정식을 산출했다 이 모델을 실험기인 유연 매니퓨레이터 ADAM(Aerospace Dual Arm Manipulators)에 적용하여 실시간 위치/힘 제어 실험을 행하였으며, MATLAB를 이용하여 해석했다. 또한, ADAMS$^{TM}$ FEM를 이용하여 분포 정수 모델을 도출하여, 해석하였으며, 이 결과와 집중 정수 모델을 이용한 MATLAB 해석의 결과, 그리고 실험 결과를 비교 분석하여 본 논문에서 제안한 구속받는 유연 매니퓨레이터의 집중 정수 모델 타당성을 입증시켰다.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.158-164
• /
• 2014

For transmitting the ultra-high speed optical signals with better performance, the techniques to suppress or mitigate the signal distortion due to group velocity dispersion and optical Kerr effects are required. Dispersion management (DM), optical phase conjugation, and the combination of these two are promising techniques to compensate for the signal distortion. However, the fixed length of single mode fiber (SMF) and the fixed residual dispersion per span (RDPS) usually used in these optical links restricts flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the artificial and the random distribution of SMF length and RDPS of each fiber spans consisted of the optical link. It is confirmed that the proposed link configurations should be one of the methods suitable for implementing the flexible optical transmission systems, however which depend on other link parameters, such as the averaged RDPS, and the launch power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.708-714
• /
• 1990

This paper has proposed a self-tuning controller for tracking reference trajectory by measuring End-point of arm on robot manipulator whose link is light and flexibls, and proved the perforformance of the algorithm proposed through the computer simulation. As an object of control, a flexible robot manipulator with two-links was selected. As for structure of model, it utilized an assume mode shape method with include travity force and derived a dynaics equation by adapting two kinds of vibration mode of each.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.791-800
• /
• 1996

Linear LQG controller has been investigated to control flexible link manipulators. The performance and complexity of these depend largely on the model upon which the controller is designed. In this study, the flexible modes of the link manipulator are considered to have uncertain parameters, which can be represented by random variable and these parameters are reflected on the weighting of performance. In this method, the exact modelling for the flexible modes is not necessary. The order of the resulting controller is much lower than the one based on a full model. Through numerical study, it is shown that the performance and the stability-robustness of the proposed controller reaches reasonably the one based on the full model.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.62-68
• /
• 1996

Linear controllers, such as LQG/LTR controller, have been investigated to control flexible link manipulators. The performance and complexity of these depend largely on the linearized model upon which the controller is designed. In this study, singular perturbation model is tested in designing a LQG/LTR controller for a flexible link manipulator. The order of the resulting controller is much lower than the one based on a full model. Through numerical study, it is shown that the performance of the proposed controller reaches reasonably to the one based on the full model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.967-970
• /
• 2014

The compensation characteristics are investigated as a function of the deviation of residual dispersion per span (RDPS) in the optical transmission links with a randomly distributed RDPS and optical phase conjugation (OPC). The simulation results show that the effective launch power are more increased and the effective net residual dispersions (NRDs) are more increased, as the deviation of RDPS is more narrow.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.737-752
• /
• 1992

Analysis of elasto-dynamic deformation of flexible linkage mechanism is conducted using the finite element method. The equations of motion of the system are derived from the static structural problem in which dynamic inertia, gravitational and driving forces are treated as external loads. Linear spring model is included in the formulation of equation of motions to represent the effects of deformation of elastic bearings of revolute joints on the system behavior. A computer program is constructed and applied to analyze a specific crank-lever 4-bar mechanism. The algorithm of the program is as follows. First, the natural frequencies and the mode shapes of the system are calculated by solving the eigenproblem of the mechanism system which can be considered as a static structure by assuming the input shaft (crank shaft) to be fixed at any given configuration of mechanism. And finally, the elasto-dynamic deformation of the whole system is obtained using mode superposition method for the case of constant input speed. The effect of geometric stiffness on the mechamism is included in the program with the axial forces of links obtained through the quasi-static displacement analysis. It is found that the geometric stiffness exerts an important effect upon the elasto-dynamic behavior of the flexible linkage mechanism. Elastic deformation of bearing lowers the natural frequencies of the system, resulting smaller elastic displacement at the mid-point of the links and bigger elestic displacement at the ends of the links than rigid bearing. The above investigation of flexible linkage mechanism shows that the effects of the elastic deformation of bearing on the mechanism should be considered to design the mechanism which satisfies more preciously the purpose and the condition of design.

• Journal of KSNVE
• /
• v.5 no.3
• /
• pp.385-394
• /
• 1995

Recently, since robot manipulator becomes faster and lighter, its link is no longer regarded as rigid body, and robot controller which only controls robot position cannot reduce vibration of the flexible link. Therefore vibration control is needed in robot manipulator control in addition to position control. In the case that tip mass changes when robot manipulator in working, it is clear that the efficiency of the vibration/position controller designed for the fixed system goes down. In this paper, the system with time varying parameters, adaptive control theory is adopted which estimates parameters changed by the variation of the tip mass and re-calculates the gain of the controller. Validify of the proposed adaptive controller and capability of the estimator are evaluated by computer simulations and experiments. Comparison results of the optimal controller for the fixed system and proposed adaptive controller and carried out.

• Information and Communications Magazine
• /
• v.32 no.4
• /
• pp.72-79
• /
• 2015

이동셀은 최근 급증하고 있는 모바일 트래픽을 수용함과 동시에 사용자 중심의 유연한 네트워크를 구성하기 위한 이동형 기지국이다. 본 고에서는 이동셀의 필요성과 그 개념을 소개하고, 인접한 이동셀 간 데이터 및 제어 정보의 교환을 제공하는 이동셀의 사이드홀 통신을 설명한다. 또한, 이동형 환경을 고려한 사이드홀 링크 관리 기술을 살펴보고 그 연구 결과를 간략하게 소개한다.