• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.203-207
• /
• 2009

In the NCAs(non-conductive adhesive) for adhesion of Micro Electro Mechanical System(MEMS), there are some problems such as delamination and cracking, because of the differences of CTE(coefficients of thermal expansion) between NCAs and substrates. Addition of inorganic particle or flexibilizer have been performed to solve those problems. In this study, to improve the flexibility of epoxy adhesive, epoxy/siloxane composites were prepared by adding 1, 3, or 5 phr of amino modified siloxane(AMS). Glass transition temperatures(Tg), moduli and CTE of those composites were measured to confirm effects of siloxane on thermal/mechanical properties of siloxane/epoxy-composites. Tg of AMS/epoxy-composites decreased from $134^{\circ}C$ to $122^{\circ}C$ with increasing AMS contents and moduli decreased from 2,425 MPa to 2,143 MPa with increasing AMS contents. But CTE of AMS/epoxy-composites increased from $67ppm/^{\circ}C$ to $71ppm/^{\circ}C$ with increasing AMS contents. In short, the addition of siloxane is effective for enhancing the flexibility of epoxy but leads to the decrease of Tg.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.301-308
• /
• 2008

The purpose of this study was to investigate the change of physical fitness, MDA, SOD after short-term weight reduction through exercise, food restriction and exhalation of sweat among Taekwondo players. The subjects ten male collage Taekwondo players with excellent practical skills, and more than seven years of experiences. They were asked to reduce about 5% of their body weight in seven days. Physical fitness levels were analyzed through grip strength, muscle endurance, flexibility, power, agility, balance, reaction time and MDA and SOD through blood test. The results of this study were as follows; First, there was no significant change in physical fitness due to short-term weight reduction in muscle strength, muscle endurance, flexibility, power, agility, balance and reaction time. Second, The change of MDA and SOD, resulting from short-term weight reduction did not show significant difference statistically. Therefore, the results of this study indicate that the Taekwondo players' short-term weight reduction of 5% of their body weight did not influence on their athletic performance and physiological capacity. Therefore athletes and coaches should endeavor to take exercise, dietary, and dehydration into consideration when conducting 5% of their body weight reduction in a week.

• 한국체육학회지인문사회과학편
• /
• v.56 no.6
• /
• pp.541-559
• /
• 2017

The purpose of this study was to understand breast cancer survivors' line dance program participation experience and their perceived effects. Nine participants were selected by the purposive sampling. In the current study, phenomenological research methods were used and qualitative data were collected through in-depth interviews and observation. The analyses indicated that participants's positive experiences were categorized into physical (physiological change, improved digestive system, sleep quality and cognitive function), psychological (pleasure, vigor, peace, self confidence, and satisfaction) and social (improved mood among family members, peer support and pleasure) benefit. Furthermore, participants enjoyed unique characteristics of line dance such as continuous music and nature of group exercise where they enjoy information sharing and peer support In summary, a line dance program was safe and beneficial for breast cancer survivors and should be recommended as one of exercise options for breast cancer survivors.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.255-262
• /
• 2007

In this work, two types of copolymers are manufactured by a radical polymerization to develop a material for humid membrane. Each copolymer contains three monomers that have functions to improve humid-resistance, membrane stability, flexibility, impedance, and adhesion to the electrode. MDBAB (N,N'-dimethyl-2-methacryloxyethyl-3-bromopropyl ammonium bromide) having a salt form decreases the impedance of the humid membrane and reacts with amines to produce a cross-linking structure. HEMA (2-hydroxyethyl methacrylate) has an important role which reduces the impedance and increases the adhesion strength to the electrode. The other monomers are DAEMA (N,N'-dimethylamino ethyl methacrylate), 4-VP(4-vinyl pyridine), and 2-EHA(2-ethylhexyl acrylate) and all the monomers are formulated with several compositions to make a humid membrane. At specific composition, we could attain a satisfactory results having good performance and long term durability.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.3
• /
• pp.42-49
• /
• 2024

In the electromagnetic wave shielding material market, superior shielding performance in the high-frequency range, along with flexibility and durability, has emerged as critical requirements. The need for high-performance EMI (Electromagnetic Interference) films to address electromagnetic wave interference issues is growing, particularly in various industrial sectors such as smart electronic devices, automotive electronic systems, and communication equipment. In this study, a trimodal silver paste was developed and fabricated into an EMI film, with its performance evaluated. The developed silver paste, utilizing a modified epoxy binder, exhibited properties suitable for screen printing processes. The film demonstrated excellent shielding performance, with an average attenuation of -99 dB in the high-frequency range of the 5G spectrum (26.5 GHz to 40 GHz), and a shielding effectiveness of -90.3 dB at 33.6 GHz. Flexibility and durability tests showed that the film maintained its flexibility even at a curvature radius of 1 mm. In the bending cycle test, the resistance increased by approximately 25.5% from 0.51 Ω to 0.64 Ω after 10,000 cycles in the outer bending scenario, while in the inner bending scenario, the resistance decreased by about 3.6%, indicating reduced resistance to compressive stress.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.19-26
• /
• 1981

자동차제조에 있어서의 용접은 신뢰성 양산과 생력화에 대응하여 접합 조립하는 방법으로 특이한 분야를 형성하여 발전되었다. 예를 들면, 자동차의 생산은 기본적으로 양산체제를 갖추고 있 어서, 일반적으로 노동집약형 산업이라고 불리어지며 그 제조공정을 보면 stamping press 공정과 같이 용접공정도 비교적 장치산업적인 분야로 빠르게 자동화나 성인화 내지 무인화로 진행되고 있다. 자동차용접은 사람이 portable spot welder로 한점씩 용접하지만 양산에 대비한 합리화와 안정화를 위하여 다점용접 (multi spot weld)라는 자동화공법의 도입이 불가피하며 금일의 자 동차생산에 있어서 상식화가 되고 있다. 이것은 한개의 차체라면 차형의 대조 또는 press panel의 수에 따라 차이가 조금 있으나 약 4-5 천점의 점용접이 필요하기 때문에 여러 가지 반송장치와 조합하여 대규모의 line설비로 발전되어 가고 있다. 이와 같이 용접공정의 자동화는 생산성을 높이는 반면에 전용성이 높기 때문에 설계변경에 대한 초기투자의 용접설비 대부분을 갱신하여야 하는 새로운 투자의 필요문제가 증대되었다. 이러한 전용설비에 대한 유연성을 가미한 자동차로 지향되어, 그 한 방법으로 산업용 robot가 도입되었다. 근래에 와서는 자동차제조에 있어서 새 로운 용접기술을 합리적으로 효과있게 적용하는 기술이 금후의 연구과제라 하겠다.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.40-45
• /
• 1996

전자제어를 이용한 자동차의 제어란 인간의 감각 기관과 같은 센싱부, 두뇌와 같은 전자제어 유니트부, 명령을 수행하는 액츄에이터로 구성되어 있다. 그 중 센서는 각가지 물리량 및 화학량을 전자제어 유니트가 이해할 수 있는 전기적인 양으로 변환하여 전달하는 부품이라고 할 수 있으며 매우 다양한 원리와 구조로 이루어져 있다. 그 중에서 자동차에서 일어나는 가장 일반적인 물리량인 가속도, 압력, 충격, 변위, 온도 등을 센싱할 수 있는 재료인 세라믹 재료는 자동차의 전자화에 따라서 그 적용범위가 크게 확대되어 왔다고 할 수 있다. 세라믹이란 단결정의 무질서 집합체이며, 가장 일반적인 것은 원료 분말을 조합해서 그 성형체를 고열로 소성함으로서 만들어진다. 세라믹은 절연성, 유연성, 압전성, 초전성, 반도체적 특성 등 센서와 관련된 많은 유용한 전자적 기능들을 보유하고 있어 세라믹이 아니고는 실현할 수 없는 기능들도 많이 생겨나게 되었다. 본 기고에서는 세라믹의 자동차 센서에의 응용에서 가장 일반적으로 사용되고 있는 압전 효과를 이용한 센서 재료와 서미스터를 이용한 온도센서 재료에 대해서 소개하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.373-375
• /
• 2005

디지털 홈이 구체화되면서 실내 환경조절, 방법, 가전기기 제어, 건강 모니터링 분야에서 센서 네트워크가 활용됨에 따라 이질적인 센서 네트워크간의 정보교환에 대한 요구가 증대하고 있다. 본 논문에서는 이러한 홈 환경에서 이질적인 센서 네트워크간 정보교환을 위한 메카니즘으로 홈 서버를 이용한 상호운영성 미들웨어 구조(Interoperable Middleware Architecture)를 제안한다. 이를 위하여, 홈 서버와 센서 네트워크 미들웨어 구조를 소개하고, 미들웨어가 상호운영성을 제공하기 위한 정보교환 메시지 포맷을 정의한다. 메시지 교환 양식은 XML 문서를 이용하고, 메시지 전송을 위한 프로토콜로 SOAP(Simple Object Access Protocol)을 선정한다. 본 논문의 적절성을 검증하기 위하여 홈 환경에서 이종 센서 네트워크간 점보교환 사례연구를 실시하고 이를 통해 확장성과 유연성을 보유한 정보교환 메카니즘의 효과를 확인한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.949-950
• /
• 2007

프로토타이핑이란 개발자들과 사용자들의 의사소통상의 효과를 증진시키기 위하여 취하는 시스템개발상의 기법이며, 이러한 프로토타이핑에는 가상 프로토타이핑과 실물 프로토타이핑이 있다. 본 논문에서는 기존의 실물/가상 프로토타이핑 연동 기법을 개선해서 오브젝트 기반의 임베디드 시스템 통합 프로토타이핑 개발 환경을 구축하였다. 이러한 새로운 임베디드 시스템 개발 환경을 구축함으로써, 재사용성, 유연성, 확장성 그리고 편리성을 가질 수 있다.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.537-544
• /
• 2016

This study examines the relationship between adaptation resilience, self-esteem and depression of female seniors participating in Pilates. The number of subjects for this study was 322 who were participating in the Pilates program in Gyeonggi-do. The reliability and validity test of the questionnaire and descriptive analysis, factor analysis, correlation were conducted by using SPSS 20.0 and structural equation model was conducted by using AMOS 20.0 program. The results are as follows; First, the adaptation resilience of those female seniors participating in Pilates has a positive influence on their self-esteem. Second, the adaptation resilience of those female seniors participating in Pilates has a negative influence on their depression. Third, the self-esteem of those female seniors participating in Pilates has a negative influence on their depression. Lastly there is a causal relationship between the adaptation resilience, self-esteem and depression of female seniors participating in Pilates.