• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.125-132
• /
• 2007

Inherent dynamic interaction between flexible disk and workpiece creates partially non-flat surface profile. A flat zone was defined using minimum depth of engagement. Several key parameters were defined to explain the characteristics of the zone. Process conditions including disk rotation speed, initial depth of cut and feed speed were varied to produce product profile database. Correlation between key factors was examined to find the characteristic dependencies. Trends of key parameters were displayed and explained. Higher flat zone ratio was observed for lower depth of cut and higher disk rotation speed. Ratio of minimum depth of cut against target depth of cut increased for higher feed speed and disk rotation speed but was insensitive to the depth of cut variation. The process transition was visualized by continuously displaying instantaneous orientation of the deflected disk and the location of key parameters were clearly marked for comparison.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.13-24
• /
• 2000

• 한국생산제조학회지
• /
• 제10권2호
• /
• pp.12-22
• /
• 2001

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.123-130
• /
• 2008

In order to clarify detailed mechanism of the flexible disk grinding system, workpiece length was introduced and its performance was evaluated. Flat zone ratio increased as the workpiece length increased. Increasing wheel speed and depth of cut also enhanced process performance by producing larger flat zone ratio. Neural network system was successfully applied to predict minimum depth of engagement and flat zone ratio. An additional input parameter as workpiece length to the neural network system enhanced the prediction performance by reducing error rate. By rearranging the Input combinations to the network, the workpiece length was precisely predicted with the prediction error rate lower than 2.8% depending on the network structure.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.760-767
• /
• 2010

Even though a flexible disk grinding process was often applied to enhance the product quality, it produced non-flat zone in the beginning and the exit (end) area. Since latter area is susceptible to poor product quality with burn mark, careful analysis is required to cope with such degradation. The flexible disk grinding exit stage was analyzed for workpiece length, wheel speed, depth of cut and feed. The exit stage qualities defined as exit stage ratio and exit stage angle or slope was characterized. A neural network application results reveled that exit stage characteristics was predicted more accurately without workpiece dimension with minimum error of 1.3%.

• 한국생산제조학회지
• /
• 제18권6호
• /
• pp.681-689
• /
• 2009

Disk grinding was often applied to deburring process in order to enhance the final product quality. Inherent chamfering capability of the flexible disk grinding process in the early stage was analyzed with respect to various process parameters including workpiece length, wheel speed, depth of cut and feed. Initial chamfered edge defined as arc zone was characterized with local radius of curvature. Averaged radius and arc zone ratio was well evaluated using neural network system. Additional neural network analysis adding workpiece length showed enhance performance in predicting arc zone ratio and curvature radius with reduced error rate. A process condition design parameter was estimated using remaining input and output parameters with the prediction error rate lower than 2.0% depending on the relevant input parameter combination and neural network structure composition.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.158-166
• /
• 1996

In this study, a flexible disk grinding process is applied in order to produce high precision product. A new model was developed considering feed motion along horizontal and vertical direction. Different types of feed speed variation was tested with respect to distinct process stages in order to achieve flat surface. It was observed that highest order polynomial form for both horizontal and vertical feed speed variation among the proposed categories produced surface close to flat one. Disk deflection trend during the process was visualized confirming the proposed scheme. Cutting force and VRR(volume removal rate) was observed as an aid to process planning.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.81-87
• /
• 2000

A variable cutting speed control model was developed to be implemented for the flexible disk grinding process Control algorithm was based on the error referred by the discrepancy between current disk angle and intended one that are pro-posed to produce desired resulting depth of cut. Controller was implemented in two different aspect One was to initiate the control law from the beginning while the other was to activate as soon as the disk start to produce ground surface i.e. The beginning of the between edges stage. Several performance analysis were conducted comparing various process parameters such as cutting force disk angle depth of cut and disk speed with respect to process transition time Tentative results revealed that controller implemented from the earlier stages of the process showed better performance than the other revealed that controller implemented from the earlier stages of the process showed better performance that the other.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.381-386
• /
• 2004

A flexible disk grinding system process has been introduced that utilized varying disk orientation with respect to workpiece along with the applied feed speed. A known process model methodologies has been used to fomulate processed surface profiles. Various process conditions including cutting speed, maximum feed speed and orientation angles could applied to observe process outcomes. Even though continuous and constant feed speed has been applied to the process, the results from the trapezoidal input velocity profiles would be observed and compared. Based on the control strategies including neural network methodologies, several output results were compared to find the optimum process condition.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.115-118
• /
• 2001

An image processing method was applied to characterize a shape of the flexible grinding disk. A disk surface image was taken by CCD camera. Depth of cut was changed to be 2 and 4mm. Circles marked on the disk were captured to extract the key features of the deflection. Notable correlation has been observed between the intervals and the process conditions. Same methodology has been applied to check the symmetry of the human face. Tentative results revealed that symmetry could be checked using the filtered face image.