• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.477-491
• /
• 2022

This study proposed the performance analysis and hydraulic control system design of forklift structure manipulator with 5 joints for untact working in lilited environment. The performance analysis of the control system analyzed the control response to load and pressure fluctuations. The reliability of proposed control system was verified by simulation test under the various condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.65-74
• /
• 1994

Backcap is an electric remote control system for the operation of directional flow control valves. This paper presents a new type of basckcap system which is characterized by its simple construction. The backcap is essentially a hydraulic cylinder of which the piston is connected to a spool of hydraulic valve and controlled by input current. An inherent feedback is imposed on its mechanism so that no artificial noe is needed. Characteristics of the backcap is verified by stability analysis, transient motion and steady state positioning for step inputs. Design parameter analyses have been executer by some analytical approaches and computer simulations, which lead to their optimal valves. These results contributed to an effective new backcap system and its design strategy.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.68-76
• /
• 2007

It is strongly requested to reduce fuel consumption because of high oil price and exhaust gases of road vehicles for environmental preservation. To solve these problems, several types of hybrid vehicles have been developed. Among them, flywheel hybrid vehicle using variable displacement pump/motor was already proposed as one of the feasible hybrid systems in place of hybrid vehicle by the conventional storage battery. The proposed flywheel hybrid vehicle is to keep constant pressure of high pressure line by the control of swash plate angle of flywheel pump/motor as pressure compensator. The efficiency of the overall system depends severely on the efficiency of hydraulic pump/motor in the energy saving hydraulic control system by simulation. According to the control methods of swash plate angle of piston pump/motor, there remain several problems to be solved. In this paper, experimental setup for energy saving is fabricated and the efficiency of energy saving is investigated by experiments with respect to various experimental conditions.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.1
• /
• pp.18-24
• /
• 2007

The continuously variable transmission (CVT) of which speed ratio can change continuously in a fixed range has the benefits of low fuel consumption and exhaust gas because it enables the engine of a vehicle to operate in a high efficiency range regardless of vehicle speed. The speed ratio of belt type CVT is controlled by adjusting line pressure. The one of the line pressure control methods, mechanical-hydraulic control is usually adopting VDT's control method, in which the secondary solenoid valve has two functions both a regulator and a line pressure controller. However, this control method could not show the high performance of CVT with optimal driving capability because of the limitation of simple control algorithm, and it could not gain market share sufficiently in spite of the advantage of CVT with low fuel consumption. On the other hand, the electro-hydraulic control method gives the enhancement of power performance and low fuel consumption by implementing various driving mode using the proportional control or PWM control. The key of CVT technique is to develop a control algorithm of the electro-hydraulic solenoid valve in order to implement the speed ratio efficiently. In this paper, the line pressure control algorithm is proposed and the hydraulic system is controlled using metal belt type CVT test rig and the embedded ECU platform.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.93-100
• /
• 2019

Nuclear and thermal power plants must provide the turbines with an appropriate degree of high temperature and high pressure steam, to produce the optimum electricity. Additionally, in the event of system and power system failure during electrical production, the steam is immediately disabled, to protect the turbines and generators rotating at high speed. The plant thus uses a special steam control valve system for turbine control, which is opened by force of the hydraulic servo actuator and closed by a large steel spring force. In this study, the causes of failure of the turbine control valve system, a key device of the power plants, were analyzed, and the causes of failure were improved relative to reliability of the equipment.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.4
• /
• pp.1-9
• /
• 2008

In this paper, an energy regeneration algorithm is proposed to make the maximum use of the regenerative braking energy for a parallel hybrid electric vehicle(HEV) equipped with a continuous variable transmission(CVT). The regenerative algorithm is developed by considering the battery state of charge(SOC), vehicle velocity and motor capacity. The hydraulic module consists of a reducing valve and a power unit to supply the front wheel brake pressure according to the control algorithm. In order to evaluate the performance of the regenerative braking algorithm and the hydraulic module, a hardware-in-the-loop simulation (HILS) is performed. In the HILS system, the brake system consists of four wheel brakes and the hydraulic module. Dynamic characteristics of the HEV are simulated using an HEV simulator. In the HEV simulator, each element of the HEV powertrain such as internal combustion engine, motor, battery and CVT is modelled using MATLAB/$Simulink^{(R)}$. In the HILS, a driver operates the brake pedal with his or her foot while the vehicle speed is displayed on the monitor in real time. It is found from the HILS that the regenerative braking algorithm and the hydraulic module suggested in this paper provide a satisfactory braking performance in tracking the driving schedule and maintaining the battery state of charge.

• Journal of Biosystems Engineering
• /
• v.14 no.3
• /
• pp.168-180
• /
• 1989

This study was attempted to develop the electronic-hydraulic hitch control system for position control of tractor plow and investigate the control performance of the system through experiments. Experiments were carried out to investigate the responses of the system to the step and sinusoidal inputs in position control. The effects of control mode, hydraulic flow rate, reference deadband, and proportional constant on control performance of the system were investigated. The following conclusions were derived from the study; 1. For the position control system operated on on-off control mode, positions of implement were controlled within ${\pm}0.73^{\circ}{\sim}{\pm}1.46^{\circ}$ in rockshaft angle to the reference position when the hydraulic flow rates were 5~15 l/min. For the position control system operated on PWM control mode, positions of implement were controlled within ${\pm}0.73^{\circ}$ to the reference position regardless of hydraulic flow rates. It means that the implement could be positioned more accurately to the reference position on PWM control mode than on on-off control mode. 2. As results of the frequency responses of the position control systems, no clear difference in control performance between on-off control and PWM control modes was found. As the hydraulic flow rates increased, the corner frequencies of amplitude attenuation and phase-angle change increased. It means that the control performance of the system could be improved as the hydraulic flow rate increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4083-4094
• /
• 2011

The Electric Power Steering (EPS) has been applied to the vehicles due to its better fuel efficiency, better steering feel, and the compact volume compared to the hydraulic power steering. The brushed PM (Permanent Magnet) DC motors had been adopted in most of the EPS systems until several years ago due to its easy control and a simple hardware configuration of the power converter, but nowadays the BLAC (Brushless AC) motor is becoming more popular for the EPS system because of its high efficiency and long lifetime. This paper reviews the configuration of the EPS system and the BLAC motor and drive technologies based on the papers published recently. The torque ripple reduction for steering feel and the fault detection algorithms for safety are also reviewed.

• 기계와재료
• /
• v.23 no.3
• /
• pp.96-113
• /
• 2011

녹색기술 및 친환경 공정의 필요성이 급증함에 따라 재료이용률 향상을 지향하는 차세대 압출공정의 대두가 필요하게 됨에 따라 유압 CNC(Servo) 제어를 이용한 가변단면 압출기술을 개발하게 되었다. 이러한 가변단면 압출(Varied section extrusion, VSE)기술은 공정 중에 압출구를 빠져 나가는 소재의 단면 형상을 변화시켜 재료이용률을 향상을 도모하였으며, 후가공 공정의 생략도 가능하여 국내 압출업체의 생산원가 절감 및 글로벌 기술경쟁력 확보에 큰 도움을 줄 수 있을 것이다. 아직은 소수의 선진국에서 시도한바 있으나 양산품 적용에는 생산원가 및 생산속도, 상품성 등에 문제가 있어 자동차 부품 적용에 한계를 보이고 있는 기술이다. 따라서 본 연구팀이 가변단면 압출용 금형을 포함한 최적의 압출공정 및 양산성 문제의 해결점을 거의 확보하고 있는 단계로 세계를 선도하는 리딩기술(Leading technology)을 보유하게 됨으로써 국가의 기술경쟁력 향상에 중요한 역할을 수행할 수 있을 것이다. 본 연구의 내용을 요약하여 정리해 보면 첫째로는 CNC 제어 가변단면 압출공정에 대하여 자세하게 소개하고 특징 및 장 단점을 설명하였으며, 자동차 부품군에로의 적용에 많은 이점들을 갖고 있음을 설명하였다. 두 번째로는 가변단면 압출을 위한 이동 금형(Moving die)부품을 갖는 구조의 압출금형에 관하여 기존의 압출금형과 비교하여 설명하였으며, 가변단면 압출용 금형의 구조 및 메커니즘의 최적화를 이루고자 하였다. 세 번째로는 가변단면 압출공정을 실현하기 위한 CNC 제어 압출시스템에 대하여 간략히 설명하였다. 네 번째로는 자동차 부품 적용을 위한 정밀 압출공정으로서 가변단면 압출공정에 대하여 유한요소해석을 통하여 가변단면 압출공정 변수 및 금형 변수 등에 대한 엄격한 검토를 선행적으로 수행하여 양산성 확보를 위한 정보들을 분석 정리하였다. 끝으로는 세 가지 단면형태를 갖는 가변단면 압출제 시제품에 대하여 CNC 제어 가변 단면 압출공정의 상용화 가능성을 확인 적용성 검토를 완료하였다. CNC 제어 가변단면 압출기술은 압출공정에 있어서 많은 경험과 기술적 검토가 선행되어져야 하는 고부가가치 성형공정으로써 재료 이용률을 획기적으로 향상시킬 수 있는 압출공법으로 향후 자동차 부품 뿐만아니라 다양한 알루미늄 제품군에 적용이 가능하다고 판단된다.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.1-10
• /
• 2021

The electro-hydrostatic actuators (EHA) are widely used in various industrial fields since they can independently execute the function of the hydraulic power source and have high efficiency. Particularly, in the aviation field, the EHA is mainly designed as dual redundant asymmetric tandem actuator to mitigate failure and minimize installation space. However, aviation EHAs designed in the form of dual redundant asymmetric tandem actuator have the disadvantage of decreased durability performance due to the occurrence of force fighting. In this paper, the controller is designed based on backstepping technique to improve control performance and reduce force fighting for aviation EHA. The augmented state observer is proposed to estimate the states required for control. Through simulation, it was verified that the proposed controller had superior control performance and significantly reduces the force fighting compared to the general PI controller.