• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.157-167
• /
• 2008

The aeration of an overtopping wave on a vertical structure generated by a plunging wave was investigated through laboratory measurements of void fraction. The overtopping wave occurring after wave breaking becomes multi-phased and turbulent with significant aeration, so that the void fraction of the flow is of importance. In this study, fiber optic reflectometer and bubble image velocimetry were employed to measure the void fraction, velocity, and layer thickness of the overtopping flow. Mean properties were obtained by ensembleand time-averaging the repeated instantaneous void fractions and velocities. The mean void fractions show that the overtopping wave is very high-aerated near the overtopping wave front and relatively low-aerated near the deck surface and rear free surface of the wave. The flow rate and momentum of the overtopping flow estimated using the measured data show that the void ratio is an important parameter to consider in the multiphase flow. From the similarity profiles of the depth-averaged void fraction, velocity, and layer thickness, one-dimensional empirical equations were obtained and used to estimate the flow rate and momentum of the overtopping flow.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.2953-2964
• /
• 1996

Heat Transfer with periodic fluctuation of fluid temperature caused by oscillatory flow or compression expansion can be out of phase with balk fluid-wall temperature difference. Newton's law of convection is inadequate to describe this phenomenon. In order to solve this problem the concept of the complex Nusselt number has been introduced by severla researchers. The complex Nusselt number expresses out of phase excellently while the first harmonic is dominant in the variations of both fluid-wall temperature difference and heat flux. However, in the case of oscillatory flow with non-linear wall temperature distribution, the complex Nusselt number is not appropriate to predict the heat transfer phenomena since the higher order harmonic components appear in periodic temperature variation. Analytic solutions to the heat transfer with an sinusoidal well temperature distribution were obtained to investagate the effect of non-linear wall temperature distribution. A new formula considering the thermal boundary layer was suggested based on the solutions. A comparison was also made with the complex Nusselt number. It was verified that the new formula describes well the heat transfer of oscillating flow even if the first harmonic component is not dominant in the fluid-wall temperature difference.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.4
• /
• pp.153-165
• /
• 2018

In this study, the performance of irregular wave field generation of olaFlow is first verified by comparing the frequency spectrum of the generated waves by the wave-source using olaFlow and the target wave. Based on the wave performance of irregular waves of olaFlow, the characteristics of the velocity field including the average flow velocity, longshore current and turbulent kinetic energy around the three-dimensional permeable submerged breakwaters, which act as the main external forces of the salient formation, are numerically investigated. The numerical results show that as the gap width between breakwaters decreases, the wave height in the center of the gap increases and as the gap width between breakwaters increases, the longshore currents become stronger. As a result, it is possible to understand the formation of the salient formed behind the submerged breakwaters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6159-6166
• /
• 2012

A discharge measurement is difficult in flood season which is especially important in the water resources field and the continuous discharge measurement for all rivers is impossible on the present system. So, the stage-discharge curve has been used for a long time to produce discharge data of rivers. However, there has been problems from a reliability angle due to the fact that this method uses only stage-discharge relationship, although the stage-discharge curve has the convenience. Therefore, a new mean velocity equation was derived by using Chiu's 2D velocity formula of the entropy concept in this paper. The derived equation reflected hydraulic characteristics such as the depth, gravity acceleration, hydraulic radius, energy slope, kinematic coefficient of viscosity, etc. and estimated also a maximum velocity. In addition, this method verified the relationship between a mean and maximum velocity and estimates an equilibrium state ${\phi}(M)$ well presenting properties of a river cross section as the results. The mean velocity was estimated by using the equilibrium state ${\phi}(M)$, and then the discharge was estimated. To prove this equation to be accurate, the comparison between the measured and estimated discharge is conducted by using the measured laboratory data in the unsteady condition flow showing loop state and the results are consistent. If this study is constantly carried out by using various laboratory and river data, this method will be widely utilized in water resources field.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1609-1613
• /
• 2008

국내에서 하천 정비 사업을 수행할 경우에 HEC-RAS와 같은 1차원 수치모형을 이용하여 개략적으로 홍수위 및 단면평균 유속 분석을 통한 치수안전성을 검토하고 있다. 그러나 1차원 모형은 교량이나 보 등의 하천 횡단구조물에 의한 수위 상승 구간을 정확히 산정하기 어려우며 지류가 유입하는 합류지점이나 하도형상이 급변하는 지점에서의 국부적인 흐름의 변화양상을 계산하기에는 많은 한계가 있다. 따라서 본 연구에서는 감천과 직지사천이 합류하는 구간을 대상으로, 1차원 수치모형인 HEC-RAS와 2차원 모형인 FLUMEN을 이용하여 수위 및 유속분포 등 수리특성을 비교 분석하여 그 특성을 파악하였다. 모형의 적용 결과, 두 모형 모두 김천교 수위국의 실측치에 대해 절대오차율평균이 5% 이내이며 상관계수 및 결정계수가 1에 가까운 값을 보여 비교적 정확한 모의 결과를 보여주었다. 또한 두 모형 모두 교량 직상류부의 수위상승과 직하류부의 수위하강의 양상은 비교적 동일하게 나타났다. 그러나 수리구조물에 대한 영향을 1차원 모형이 잘 반영하지 못하기 때문에 합류부 상류구간의 교량 단면에서 수위 및 유속분포의 차이는 비교적 크게 나타났으며, 특히 합류부 직상류부의 교량단면에서의 수위분포는 $15{\sim}20%$ 정도의 차이가 나타났다.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.861-870
• /
• 2020

As the flow velocity and Reynolds number increase in rockfill porous media, the flow deviates from Darcy conditions. In this study, the permeability tests of rock column specimen and laboratory gabion weir model were carried out to investigate a head loss behaviour of flow through rockfill deposition in small river artificial recharge. Through column test, the nonlinear relationships between flow velocity and hydraulic gradient and coefficients were determined and the correlation formula of hydraulic mean radius and coefficients was proposed. The flow velocities and discharges in voids estimated by proposed equations were well matched with the measured values of laboratory gabion weir model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.93-93
• /
• 2012

하천의 수면 폭, 평균수심, 평균유속은 유량과 함께 변화한다. 이들의 관계는 멱함수의 형태로 표현될 수 있으며, 변동성을 바라보는 관점에 따라 두 가지로 구분된다. 하나는 시간에 따른 변동성으로 한 지점에서 서로 다른 주기를 갖는 유량들의 폭, 수심, 유속과의 관계(지점수리기하, at a station hydraulic geometry)이며, 다른 하나는 공간적 변동성으로 하천의 하류 방향으로 가면서 나타나는 유량과 폭, 수심, 유속과의 관계(하류수리기하, downstream hydraulic geometry)이다(Leopold and Maddock, 1953). 두 가지 수리기하의 경우 모두 자연 하천의 프랙털 특성(fractal)을 보여주는 예라 할 수 있다. Dodov and Foufoula-Georgiou (2004)는 Stall and Fok (1968)의 자료를 재분석한 결과, 지점수리기하의 지수 값이 해당 지점에서의 유역면적에 관한 함수로 표현될 수 있음을 발견하였다. 그러나, 이러한 멀티 프랙털 특성은 모든 하천유역에서 발견되는 것은 아니며, Dodov and Foufoula-Georgiou (2004)가 통계적으로 분석한 대상유역의 결과도 그 유의성에 논란의 여지가 있다고 볼 수 있어서, 현대 수문지형학의 남겨진 숙제라고 할 수 있다. 이에 본 연구에서는 수리기하의 멀티 프랙털 특성을 수문학적 동질성 여부라는 측면에서 탐구하였다. 이를 위해 본 연구에서는 기존 수리기하 관계식과 차별되는 무차원변량을 이용한 새로운 관계식을 제안하였으며 이를 관측 자료에 적용하여, 멀티 프랙털 특성의 존재 여부를 고찰하였다.

• Membrane Journal
• /
• v.11 no.4
• /
• pp.161-169
• /
• 2001

Single and mixed particle suspensions of kaolin, bentonite, starch and PMMA were carried out using a dead-end Amicon fi1tration cell with microfilteration membranes. The experimental data of permeate fluxes were fitted by the constant pressure fi1tration models in order to investigate fouling steps. In 0.1 wt% mixed solution of equal amount of kaolin and starch, the permeation flux was about 30% lower than the average of each particle flux. However, the permeation flux for kaolin/PMMA mixed solution was about 10% higher than the average of each particle flux. In the cases of bentonite and PMMA or starch mired solution, the improvement effect on permeation flux was weaken than that of kaolin mixed solution. Also, the membrane fouling resistance for mixed particle solution of equal amount of kaolin and starch was minimum at 0.05 wt% particle concentration.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.218-224
• /
• 2001

Water movement in the Young San River Estuary where a sea dyke was constructed, was observed using anacoustic doppler profiler (ADP) and two TGPS buoys for 25 hours on 27-28 July 2000. Hydrographic observations were simultaneously taken using CTD to understand the characteristic of the spacial structure of temperature and salinity. A large quantity of fresh water was discharged from the sea dyke on 26 July 2000. The observation period fell on neap tide. The amplitude of the tidal elevation and the maximum velocity of the tidal current were about 4 m and 12 cm/sec respectively. The water movement at the surface layer is mainly controlled by wind, and those at the other layers are controlled by semidiurnal tide. The low salinity water less than 22 psu was observed along the northern part during the early observation period while southerly wind prevails. The less saline water moves westward and finally leaves the estuary by easterly wind early on the second day. We can divide the vertical structure into four layers by hydrography and current structure. Mean velocity structure shows that relatively less saline waters at the surface and the middle layer move seaward, and the waters at the upper and the bottom layers move landward. It is thought that the intermittent discharge of river water from the sea dyke makes vertical structure of four layers.