• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.99-118
• /
• 2012

The aim of this study is to define a correlation between spatial distribution characteristics of FFG(Functional Feeding Groups) of aquatic insects and related environmental factors in the Geum River based on the theory of RCC(River Continuum Concept). For that objective we had used SMRA(Stepwise Multiple Regression Analysis) method to analyze close relationship between the distribution of aquatic insects and the physical and chemical factors that may affect their inhabiting environment in the study area. And then, a probabilistic method named Frequency Ratio Model(FRM) and spatial analysis function of GIS were applied to produce a predictive distribution map of biota community considering their distribution characteristics according to the environmental factors as related variables. As a result of SMRA, the values of decision coefficient for factors of elevation, stream width, flow velocity, conductivity, temperature and percentage of sand showed higher than 0.5. Therefore these 6 environmental factors were considered as major factors that might affect the distribution characteristics of aquatic insects. Finally, we had calculated RMSE(Root Mean Square Error) between the predicted distribution map and prior survey database from other researches to verify the result of this study. The values of RMSE were calculated from 0.1892 to 0.4242 according to each FFG so we could find out a high reliability of this study. The results of this study might be used to develop a new estimation method for aquatic ecosystem with macro invertebrate community and also be used as preliminary data for conservation and restoration of stream habitats.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.8
• /
• pp.5-12
• /
• 2015

In this study, buoyancy-resistance permanent anchor was considered to prevent uplift pressure of a building structure. However, this test was failed to put anchor body in the boring hole because of the rapid outflow of ground water and coefficient of permeability. In addition, the hole where the anchor body was forcefully inserted constantly flew the sea water and cement. And it was found that anchor was not settled in the ground. In order to solve this problem, jet grouting method was applied to block the ground water and the single grouted column method was chosen to install the buoyancy-resistance permanent anchor. In this paper, the single grouted column method was applied with the general jet grouting methods and grout material was fixed by 3-field tests. These tests confirmed the effect of permeability and ground improvement with field permeability test by core sampling, Standard Penetration Test (SPT) and unconfined compression test. Confirming the stability of the buoyancy-resistance permanent anchor with installation and tension test, application of the single grouted column method in the volcanic clastic zones was verified.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.286-293
• /
• 2005

An interpretation on the solid circulation characteristics in a fluidized-bed process has been carried out as a first step to simulate the dry entrained-bed absorption and bubbling-bed regeneration system for $CO_2$ removal from flue gas. A particle population balance has been developed to determine the solid flow rates and particle size distributions in the process. Effects of principal process parameters have been discussed in a laboratory scale process (absorption column: 25 mm i.d., 6 m in height; regeneration column: 0.1 m i.d., 1.2 m in height). The particle size distributions in absorption and regeneration columns were nearly the same. As gas velocity or static bed height in the absorption column increased, soild circulation rate and feed rate of fresh sorbent increased, however, mean particle diameter decreased in the absorption column. As cut diameter of the cyclone of the absorption column increased, solid circulation rate decreased, whereas feed rate of fresh sorbent and mean particle diameter in the absorption column increased. As attrition coefficient of sorbent particle increased, solid circulation rate and feed rate of fresh sorbent increased but mean particle diameter in the absorption column decreased.

• Journal of the Korean Chemical Society
• /
• v.54 no.5
• /
• pp.523-532
• /
• 2010

The proposed method is simple, sensitive and specific Liquid chromatography-tandem mass spectrometry (LCESI-MS/MS) method for the quantification of Entacapone (EA) in human plasma using Entacapone-d10 (EAD10) as an internal standard (IS). Chromatographic separation was performed on Zorbax SB-C18, $2.1{\times}50\;mm$, $5\;{\mu}m$ column, mobile phase composed of 10 mM Ammonium formate (pH 3.0): Acetonitrile (60:40 v/v), with a flow-rate of 0.7 mL/min, followed by Liquid-liquid extraction. EA and EAD10 were detected with proton adducts at m/z $306.1{\rightarrow}233.1$ and $316.3{\rightarrow}233.0$ in multiple reaction monitoring (MRM) positive mode respectively. The method was validated over a linear concentration range of 1.00 - 2000.00 ng/mL with correlation coefficient ($r^2$) $\geq$ 0.9993. Intra and inter-day Precision within 3.60 to 7.30 and 4.20 to 5.50% and Accuracy within 97.30 to 104.20 and 98.30 to 105.80% proved for EA. This method is successfully applied in the bioequivalence study of healthy Indian human volunteers.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2006

FEMLAB is a powerful interactive environment for modeling, solving all kinds of scientific and engineering problems based on partial differential equations(PDEs). Separation process of chiral compound in HPLC columns was simulated by FEMLAB. To study change of elution profile with isotherm models, non-competitive and competitive Langmuir adsorption isotherm were adopted. Separated material was (R, S)-ibuprofen [(R, S)-2-(4-isobutyl phenyl) propionic acid], an anti-inflammatory agent, which retain the pharmacological activity in the (S)-(+)-enantiomer. Sample concentrations were changed from 0.5 mg/ml to 2.0 mg/ml at a flow rate of 1 ml/min and flow rate varied from 1 ml/min to 3 ml/min at an ibuprofen concentration of 2.0 mg/ml and $20{\mu}l$ of injection volume. Simulated results were well fitted with experimental data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1076-1084
• /
• 2017

For analyzing the qualitative and quantitative analysis of fuel marker in petroleum products, the applicability of HPLC was studied. For the qualitative analysis of fuel marker in kerosene and automotive diesel, optimal analytical conditions(ratio of mobile phase solvent, flow rate, etc) in HPLC were selected and calibration curve for quantitative analysis of fuel marker was prepared based on the result of qualitative analysis. In particular, the correlation coefficient of calibration curve in kerosene and automotive diesel was shown to be 0.999 in a certain concentration range and it could be applied to the quantitative analysis. The results of analysis using the UV/Vis spectrometer, which is the current analysis method of fuel marker, were compared with the analysis results using the HPLC. The kerosene showed a low deviation of about 7 % and the automotive diesel showed a somewhat large deviation of about 20 %.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.457-470
• /
• 2019

This study aims to present the characteristics of marine physics, water quality, and sediment quality around offshore wind farm near the Gochang and Buan sea areas through the analysis of monitoring data. The relationships between suspended solid and wave height as well as suspended solid and flow velocity were analyzed. We found that Correlation Coefficient values of 0.61~0.69 between wave height and suspended solid, and suspended solid concentration reaches 75 mg/L or higher when wave height of more than 1m occurred in the spring (1 month). The water quality index (WQI) was used to identify the status of the water quality in the study area. Most of the measured points were rated first grade (very good). The variation of chlorophyll-a was relatively hight compared to the other criteria, indicating that it is a major factor affecting the quality index. In the sediment column, all heavy metals were detected below the Threshold Effects Level(TEL), and ignition loss and grain size show a positive correlation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.394-394
• /
• 2015

급격히 변화하고 있는 산업화와 도시화로 지구 온난화 현상으로 기상이변의 발생빈도가 높아졌고 기후가 불안정하여 예전보다 많은 집중호우가 발생하면서, 홍수로 인한 제내지 침수가 발생되기도 한다. 기후변화로 인한 수재해에 대응하기 위하여 하천 호소 수리 예측 모형의 개선이 필요한 실정이다. 하지만, 자연하천 유역의 강우-유출 상관관계와 지표면 유출현상 및 하도 수리 특성을 자연현상의 복잡성, 강우발생의 시간적 공간적인 발생과정의 임의성, 정확한 해석방법 및 확률 분석에 따르는 불확실성 들을 토대로 단순한 이론과 제한적인 경험공식 등에 의해서 해석, 재현 및 평가를 한다는 것은 매우 어려운 문제이다. 최근 IT 기술의 발전과 더불어, 많은 연구자, 엔지니어들이 기존 수리 수문학적 지식과 IT기술을 융합하여 복잡 다단한 수자원 환경 문제를 해결하고자 한다. 이와 같은 최근 연구 동향에 의거하여, 본 연구에서는 HEC-RAS, TELEMAC-2D 1, 2차원 수리 모형을 연계하여 하천 흐름 분석 및 홍수 범람 해석에 적용하였다. 본 연구에서는 HEC-RAS, TELEMAC 모형을 적용하여 2012년 태풍 '산바(SANBA)'로 인해 홍수 피해를 입은 고령군에 위치한 낙동강 본류 회천 유역(상류 회천교 ~ 하류 도진교)의 하도 내 흐름 분석과 하천 인근 제내지 홍수범람을 예측하였다. 범람해석에 필요한 지형자료를 기초로 하여 각 지형의 조건에 맞게 수치자료를 이용하여 작성하였고, 수자원 정보를 이용하여 유랑, 수위 등 시계열자료를 지류 및 상 하류의 경계조건으로 설정하고, 조도계수 등 하천 기본정보들을 입력하였다. HEC-RAS 모형은 회천교부터 도진교까지 전구간에 대한 종단면과 횡단면별 홍수침수범위 및 홍수위 크기 등 거시적인 1차원 수리해석에 적용하였고, TELEMAC 모형은 HEC-RAS 시뮬레이션 결과를 바탕으로 HEC-RAS에서 나타내기 힘든 2차원 흐름특성, 침수현상 등 일부 범람 구간에 대해 수리해석에 적용하였다. HEC-RAS 시스템은 수공구조물들의 영향과 하천의 영향을 종 횡단면으로 다양한 홍수침수 범위를 1차원으로 나타 낼 수 있으며, TELEMAC 시스템 수리 모의를 통해 얻어진 결과는 유속, 유량, 수심, 하상고 높이 등 2차원으로 나타낼 수 있다. TELEMAC 시스템을 활용한 2차원 분석은 실측자료와 비교적 유사하고 시각, 공간적으로 이해하기 쉽게 표현되므로, 모형 적용성이 우수한 것으로 판단된다. 향후 유역 해석을 위한 수치데이터, 수위, 유량자료를 확보하여 HEC-RAS, TELEMAC 1, 2차원 연계 모형을 적용 한다면, 하천 준설, 하천 구조물 설치, 홍수피해 등 전반적인 하천관리 계획에 활용할 수 있을 것이라 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.461-461
• /
• 2016

이상기후로 인하여 제방붕괴에 대한 위험성이 높아지고 있고, 이로 인해 발생하는 제내지 내 붕괴 홍수파에 대한 연구가 증가하고 있다. 특히 홍수파 선단의 이동 속도 추정은 제내지의 위험성을 예측하고, EAP 등을 수립하는데 매우 중요한 자료가 될 수 있다. 제내지에서의 선단 홍수파에 대한 예측을 하기 위해서는 해당 지역의 하천특성, 수리특성 및 제방 등 수공구조물 특성뿐만 아니라, 제내지의 지형 및 토지이용 현황 등을 조사하여 수리실험이나 수치모의를 수행해야 하는 것이 일반적이다. 수치해석의 경우 수리실험에 비하여 경제성 및 효율성 측면에서 뛰어날 수 있으나, 제방 붕괴과정 및 메커니즘을 반영하기가 불가능하다. 이에 반해 수리모형실험의 경우 제방붕괴 양상 및 그 과정의 재현이 가능하기 때문에, 제내지에서의 선단홍수파 전파에 관한 보다 정확한 양상을 파악할 수 있을 것이다. 그러나 이러한 실험은 실제 크기의 하천이 아닌 축소모형 또는 개수로에서 수행되었기 때문에, 초기 홍수파의 전파가 축척효과(Scale effect)의 영향을 받을 가능성이 매우 크다. 특히 선단 홍수파의 경우 파가 진행되면서 수심이 낮아지고, 유속이 느려지기 때문에 그 영향은 점차 증대된다고 할 수 있다. 이에 본 연구에서는 이러한 초기 선단 홍수파의 표면장력 영향을 고려한 보정 계수 산정에 대한 연구를 수리실험을 통해 수행하였다. 연구는 크게 4가지 과정으로 구성되었다. 첫째는 농도-표면장력의 관계 규명이며, 둘째는 표면장력-홍수파 전파 속도 관계 규명이다. 셋째는 표면장력과 Weber Number(We)의 관계를 도출하는 것이며, 마지막은 We를 이용하여 한계조건을 제시하는 것이다. 실험은 계면활성제의 농도를 변화시켜가며, 얇은 유리관(D=1.0 mm)에서 물의 상승 높이 및 접촉각을 측정하여 농도와 표면장력의 관계를 측정하였으며, 이러한 결과를 바탕으로 물의 표면장력을 변화시켜 가며 $0.5(B){\times}0.3(L){\times}0.2(H)m$의 Head-tank에 설치된 수문을 빠르게 개방하여, 홍수파가 퍼지는 양상을 관측하였다. 홍수파의 이동 속도는 진행시간에 따라서 퍼짐 넓이를 측정하여 제곱근을 취하는 방식으로 평균속도를 산정하였다. 이러한 관계를 이용하여 표면장력이 없을 경우의 이동속도 및 ??를 도출하였다. 본 연구를 통해 홍수파 전파 특성에 대한 수리실험 자료를 바탕으로 Weber 수를 도출하여 표면장력의 영향을 받는지 여부를 판단할 수 있으며, 표면장력의 영향을 받을 경우, 제시된 결과를 이용하여 홍수파 선단의 속도를 보정할 수 있다. 본 연구 결과는 토대로 축소모형으로 수행되는 홍수파 전파에 대한 수리실험결과의 보정 기초자료로 매우 유용할 것으로 판단된다.