• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.303-307
• /
• 1998

본 논문에서는 고주파수 대역의 진동 전달 현상을 묘사할 수 있는 원형파를 기본 개념으로 한 레이 추적기법(RTM)을 개발하였다. 2차원 원형파를 묘사할 수 있는 레이튜브 개념을 제안하고, 진동 연성경계에서의 입사파, 전달파, 그리고 반사파가 경계조건을 만족하도록 관계식을 유도하였다. 이를 평판 연속 구조물이 고주파수 진동 전달 해석에 적용하여 보았으며, 유사 해석 기법인 SEA 및 파동 인텐시티해석법(WIA)과의 비교를 수행하여 보았다. 그 결과, SEA에 비하여 이론해와 더 잘 맞는 예측 결과를 관찰할 수 있었으며 WIA와 유사한 결과를 보임을 확인할 수 있었다. 본 논문에서 제안된 RTM은 진동전도해석(VCA)과 같이 지역적 정보를 알 수 있는 장점도 가지고 있으며, 2차원 진동구조물의 고주파수 진동 전달 해석시 기존이 SEA 및 WIA를 대체할 수 있는 기법으로 판단된다.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.160-170
• /
• 2013

The present study analyzes a Twitter network of some 175 government organizations belonging to seven countries. They are South Korea, U.S., U.K., Australia, Canada, Singapore, and Japan. The results showed that the U.S. occupied the most central position in terms of the incoming followings. Next, some clusters among countries were also noticeable according to their cultural proximities including national languages. The findings also indicate that some governmental organizations are likely to make international ties with others whose main duties are similar to each other. Finally, the structural connectivity pattern of some inter-governmental Twitter networks was visualized using a social network software. On the other hand, it suggests that there is a potential for a soft power through social media and as a result, it could be assumed that a new knowledge hegemony appears in the future.

• Journal of the Korea Concrete Institute
• /
• v.21 no.1
• /
• pp.47-53
• /
• 2009

12 concrete blocks, on which hybrid fibrous sheets (carbon fiber and glass fiber) had been bonded, were subjected to tensile load in order to estimate properties of the bonded interface. the sheet length was varied by 100mm, 200mm and 400mm. It was found that more than 150mm bond length is required to achieve the maximum bearing capacity of the interface. In this study, maximum bond stress $\tau_{F,max}$, ultimate slip $S_{FU}$ of the interface were estimated $\tau_{F,max}$=3.0MPa and $S_{FU}$= 0.175mm, respectively.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.139-150
• /
• 1996

The objective of this study is to provide the information on the manufacturing and exper- , ructures. imental techniques of small scale modeling of precast concrete(P.C.) large panel :-t The ad~~pted scale was one-fifth. 4 types of experiments were performed : nlaterial tests for model concrete and model reinforcement, compressive test of horizontal joint, shear test of vertical joint and cyclic static test of 2-story subassemblage structure. Based on the experimental results, the following conclusions are drawn : i 1) Model concrete had in general larger compressive strength than expected. (2) Model reinforcement showed less ductility if the annealing processes were performed without using vaccuum tube. 131 Failure niotles of horizontal and vertical joints were almost same for both prototype and model. But the strength of model appears to be higher than required by similitude law. (41 Hysteretic behavior of 1 /T, scale subassemblage model can be made quite similar to that of prototype if the ductility of model reinforcement and compressive strength of model concrete could be representative of those of prototype.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.27-27
• /
• 2021

세굴은 유체와 유사의 상호작용으로 발생하는 중요한 자연 현상 중 하나로, 구조 및 지반 붕괴, 홍수, 생태계 파괴 등의 문제를 야기할 수 있다. 이러한 세굴 현상을 예측하기 위해 많은 수치적 연구가 진행되어왔지만, 대부분의 연구가 기존 격자기반방법인 유한체적법 (FVM)과 개별요소법 (DEM)이 연성된 모델을 이용하였고, 이는 격자 의존도로 인한 정확도와 효율성의 문제점을 보였다. 해결책으로 입자기반 유체해석 방법인 약압축성 SPH (WCSPH)와 개별요소법의 결합모델을 이용한 모의가 연구되어 왔지만, 단순 밀도차를 활용한 유체해석방법이 압력의 불안정성을 야기하여 유사의 운동에도 영향을 주는 결과를 보였다. 또한, 개별요소법의 특성상 모의 입자의 크기를 실제 실험 입자의 크기와 동일하게 설정하면서 입자수가 지나치게 증가해 계산의 효율성이 현저히 낮아지게 되었고, 이로 인해 실제 자연 지형에 적용하는데 어려움을 보여주었다. 본 연구에서는 향상된 세굴 수치모의해석을 위해 반복법을 통해 안정적인 유체 압력을 계산하는 비압축성 SPH (ISPH)와 개별요소법을 연성한 ISPH-DEM 모델을 사용하였다. 또한, 계산속도 향상을 위해 하나의 입자가 다수의 작은 입자의 움직임을 대표하는 Coarse-grained 방법을 적용하여 기존 모델을 개선하였다. 개선된 모델을 NFLOW ISPH PURPLE 소프트웨어를 이용하여 세굴 현상을 수치 모의하였고 실험 결과와 검증을 진행한 결과, 세굴의 깊이, 너비, 형상 등을 비교하였을 때 약 10% 이내의 오차를 보였고, Coarse-grained 방법을 통한 입자 수 감소로 최소 13배 증가된 해석 속도를 보였다. 이를 통해 본 연구에서 제시된 모델이 실제 자연 지형에서의 적용가능성을 확인할 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.355-364
• /
• 2008

The Buckling-Restrained Braces (BRB) has been developed to inhibit buckling and exhibit stable behavior under both tensile and compressive cycles. In this study, an experimental has been conducted by using the strength of its members and loading protocols as parameters to evaluate the structural performance of BRB (without in-filled concrete). Specimens are composed of an inner core and an outer tube with different steel strengths. When high-strength steels were used as inner cores, the ductility of BRB decreasedm and the requirements (Cumulative Plastic Ductility) of the AISC Seismic Provisions were not satisfied. However, when high-strength steels were used as inner cores instead of conventional strength steel cores, the maximum capacity increased significantly and displayed similar performance in total energy dissipation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.349-352
• /
• 2008

The research conducts a four-point loading test by making two reinforced concrete beams(HSCC test specimen and conventional concrete test specimen) in order to apply an HSCC with a normal strength(30MPa) to a structure. Also, it compares and analyzes the characteristics of the flexural behavior of HSCC and conventional concrete. The stiffness and ductility of the test specimens of HSCC and conventional concrete show similar behavior, but HSCC is more effective in crack control than conventional concrete. The result of the research demonstrates that HSCC can be applied in the construction site.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.740-745
• /
• 1987

For the prediction of the crack growth initiation from a blunt notch or a precrack in a prestrained material under plane strain tension and small-scale yielding conditions, a microscopic fracture criterion is proposed in terms of the crack tip opening displacement(COD) needed for the attainment of fracture strain at a microstructural distance. Smooth blunting of a crack tip with an initial root radius is assumed, and strain distributions on the crack-line axis are calculated at each deformation stage until the distributions against an original distance normalized to the COD are insensitive to an initial root radius. This case of no initial-root-radius effect is taken as for a sharp crack tip, on which the criterion is applied to determine the characteristic length of material from a critical COD for a fatigue-precracked specimen. The predicted COD at the fracture initiation from a crack with an initial root radius or a prestraining shows reasonable agreement with experimental values.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.95-104
• /
• 1985

Additional serological data from radial immunodiffusion and conventional immunoelectrophoresis with combination of presaturation of antibody were obtained for further interpretation of Cornus (and relatives) systematics. Pollen proteins were compared by qualitative and quantitative means. Cornus drummondi and C. stolonifera are very similar to C. florida, and C. amomum and C. recemosa are less similar. Nyssa constitutes the next distinct and most similar family, Nyssaceae to the Cornaceae. The serological affinities indicate that Corokia and Griselinia should not be included within the Cornaceae. Their taxonomic treatment to elevate to the family level is now awaiting until more data are accumulated.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.33-42
• /
• 2008

Buckling-Restrained Braces (BRB) has been developed to inhibit buckling and exhibit stable behavior underboth tensile and compresive cycles. In this study, an experime nt has been conducted by using the strength of its members and loading protocols as parameters to evaluate the structural performance of BRB (without in-filed concrete). Specimens are composed of an inner core and an outer tube with diferent steel strengths. When high-strength steels were used as iner cores, the ductility of BRB decreased, and the requirements (Cumulative Plastic Ductility) of the AISC Seismic Provisions were not satisfied. however, when high-strength steels were used as inner cores instead of conventional strength stel cores, the maximum capacity increased significantly and displayed similar performance in total energy dissipation.