• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.87-96
• /
• 2007

A new Energy-Dissipating Sacrificial Device (EDSD) is developed for steel plate girders, which can effectively dissipate the energy stored in the structures during seismic actions. To verify the performance of the EDSD, various seismic responses of a sample bridge with the EDSD are analyzed in terms of energy, member forces and deformation. The full scale model tests are conducted to certify the performance of the EDSD when it is applied on existing bridges. Using the improved hysteretic model of the sacrificial member, the seismic analysis for an example bridge is performed. The results show that the proposed EDSD under seismic excitations can significantly decrease the energy stored in the bridge structures and reduce the relative displacements of each superstructure to the ground. The EDSD is also found to function as a structural fuse under strong ground motions, sacrificing itself to absorb the excessive energy. Consequently, economical enhancement of the seismic performance of bridges can be achieved by employing the newly developed energy-dissipating sacrificial device.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.791-804
• /
• 2020

Residential electricity consumption can be predicted more accurately by utilizing the realtime household electricity consumption reference that can be collected by the AMI as the ICT developed under the smart grid circumstance. This paper studied the model that predicts residential power load using the ARIMA, TBATS, NNAR model based on the data of hour unit amount of household electricity consumption, and unlike forecasting the consumption of the whole households at once, it computed the anticipated amount of the electricity consumption by aggregating the predictive value of each established model of cluster that was collected by the households which show the similiar load profile. Especially, as the typical time series data, the electricity consumption data chose the clustering analysis method that is appropriate to the time series data. Therefore, Dynamic Time Warping and Periodogram based method is used in this paper. By the result, forecasting the residential elecrtricity consumption by clustering the similiar household showed better performance than forecasting at once and in summertime, NNAR model performed best, and in wintertime, it was TBATS model. Lastly, clustering method showed most improvements in forecasting capability when the DTW method that was manifested the difference between the patterns of each cluster was used.

• Journal of Service Research and Studies
• /
• v.14 no.2
• /
• pp.18-36
• /
• 2024

As interest in ESG has been increased, it is easy to find papers that empirically study that a company's ESG activities have a positive impact on the company's performance. However, research on what ESG activities companies should actually engage in is relatively lacking. Accordingly, this study systematically classifies ESG activities of companies and seeks to provide insight to companies seeking to plan new ESG activities. This study analyzes how Chinese manufacturing companies perform ESG activities based on their dynamic capabilities in the global economy and how they differ in their activities. This study used the ESG annual reports of 151 Chinese manufacturing listed companies on the Shanghai & Shenzhen Stock Exchange and ESG indicators of China Securities Index Company (CSI) as data. This study focused on the following three research questions. The first is to determine whether there are any differences in ESG activities between companies with high ESG scores (TOP-25) and companies with low ESG scores (BOT-25), and the second is to determine whether there are any changes in ESG activities over a 10-year period (2010-2019), focusing only on companies with high ESG scores. The results showed that there was a significant difference in ESG activities between high and low ESG scorers, while tracking the year-to-year change in activities of the top-25 companies did not show any difference in ESG activities. In the third study, social network analysis was conducted on the keywords of E/S/G. Through the co-concurrence matrix technique, we visualized the ESG activities of companies in a four-quadrant graph and set the direction for ESG activities based on this.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.307-316
• /
• 2005

This study analyzed the characteristics of four kinds of bridge rubber pads and suggested a method of determining the stiffness and the damping ratio of the pads.The stiffness of rubber pads can be estimated by a direct static test and a dynamic test indirectly.This study used both methods to determine the pad's stiffness.The damping ratio of pads can be obtained using the dynamic test and the damping ratio of polyurethane rubber pads was estimated to aproximate that of natural and chloroprene rubber pads.The polyurethane rubber pads are harder than natural and chloroprene rubber pads and thus carry larger load bearing capacity.In addition, they showed higher stiffness with the same shape factor than the others and thus are more available for bridge bearings.Although natural and chloroprene rubber pads are elongated to large deformation in the horizontal direction due to vertical loads, polyurethane rubber pads almost do not generate horizontal deformation due to vertical loads regardless of the thickness and hardness of the pads.Therefore, they do not need reinforced plate to restrict horizontal deformation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.969-978
• /
• 2006

Recently, there has been explosive growth in Internet service contents, and we have witnessed the emergence of many real-time applications on the Internet. These types of applications require special support from the underlying network such as reliability, timeless, and guaranteed delivery, as well as different levels of service quality. Estimation network status and transcoding data rate are researching for QoS of multimedia service by using the RTP/RTCP. We propose two schemes that the way to calculate the one-way delay by expanding the structure of RTP/RTCP in Internet that provides us 'best effort' service and to estimate the network condition by using this in this paper. And we propose the dynamic RTCP mechanism based on one-way delay to deal with rapidly changed network situation immediately. In simulation, proposed monitoring schemes using the one-way delay has similar in performance to monitoring schemes using the GPS, proposed dynamic RTCP scheme obtain the desired result of decreased packet loss rate by sending RTCP RR packet lower than other schemes.

• Journal of KIISE:Information Networking
• /
• v.33 no.3
• /
• pp.247-256
• /
• 2006

Among the resource provisioning mechanisms for the hose based Virtual Private Network (VPN) Quality of Service (QoS ), VPN-specific state provisioning allows the service provider to obtain highest resource multiplexing gains. However, dynamic and automatic resource reservation for the VPN-specific state provisioning is difficult due to the lack of appropriate resource reservation protocol. Furthermore, users of a VPN may experience unfair usage of resources among themselves since the reserved resources of a VPN are shared by the VPN users in a similar way that the traditional LAN bandwidth is shared by the attached hosts. In this paper, we propose a resource reservation protocol and a traffic service mechanism, which not only enable dynamic and automatic resource reservation according to the VPN-specific state provisioning algorithm, but also enforce the fair usage of reserved resources among the users of a VPN in case of congestion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4475-4481
• /
• 2014

A histogram equalization method have been used traditionally for the image enhancement of low quality images. This uses the transformation function, which is a cumulative density function of an input image, and it has mathematically maximum entropy. This method, however, may yield whitening artifacts. This paper proposes the weighted histogram equalization method based on histogram equalization. It has Weber-Fechner's law for a human's vision characteristics, and a dynamic range modification to solve the problem of some methods, which yield a transformation function, regardless of the input image. Finally, the proposed transformation function was calculated using the weighted average of Weber-Fechner and the histogram equalization transformation functions in a modified dynamic range. The simulation results showed that the proposed algorithm effectively enhances the contrast in terms of the subjective quality. In addition, the proposed method has similar or higher entropy than the other conventional approaches.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.111-117
• /
• 2008

In this paper, we describes the boxing motion recognition which is used in the part of games, animation. To recognize the boxing motion, we have used two algorithms, one is principle component analysis, the other is dynamic time warping algorithm. PCA is the simplest of the true eigenvector-based multivariate analyses and often used to reduce multidimensional data sets to lower dimensions for analysis. DTW is an algorithm for measuring similarity between two sequences which may vary in time or speed. We introduce and compare PCA and DTW algorithms respectively. We implemented the recognition of boxing motion on the motion capture system which is developed in out research, and depict the system also. The motion graph will be created by boxing motion data which is acquired from motion capture system, and will be normalized in a process. The result has implemented in the motion recognition system with five actors, and showed the performance of the recognition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.127-138
• /
• 1991

A gear forming method by cold extrusion and an analytical method with its numerical solution program based on the upper bound method were developed. In the analysis the involute curve was as a shape of die and the upper bound method was used to calculate energy dissipation rate. By this method the power requirement and optimum conditions necessary for extruding helical(spur) gear were successfully calculated. These numerical solutions are in good agreement with experimental data. In the experiment, 4-6 class helical gear of KS standard for automobile transmission was successfully manufactured.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.63-74
• /
• 2019

Numerical liquefaction model and response history analysis procedure are verified based on dynamic centrifuge test results. The test was a part of the Liquefaction Experiments Analysis Project (LEAP). The model ground was formed inside of rigid box by using the submerged Ottawa F65 sand with a relative density of 55% and 5° of surface inclination. A tapered sinusoidal wave with a frequency of 1 Hz was applied to the base of the model box. Numerical analyses were performed by two dimensional finite difference method in prototype scale. The soil is modeled to show hysteretic behavior before shear failure, and Mohr-Coulomb model is applied for shear failure criterion. Byrne's liquefaction model was applied to track the changes in pore pressure due to cyclic loading after static equilibrium. In order to find an appropriate flow condition for the liquefaction analysis, numerical analyses were performed both in drained and undrained condition. The numerical analyses performed under the undrained condition showed good agreement with the centrifuge test results.