• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.527-533
• /
• 1999

Hertzian indentation tests with spherical indenters in water were conducted to examine the contact fatigue in three dental ceramics, such as feldspathic porcelain, micaceous glass-ceramic (MGC) and glass-infiltrated alumina, which was used as dental restorations, and evaluated the effect of contact damage on strength. Initial damage was dependent of microstructure, showing cone cracks of brittle behavior in the feldspathic porcelain and deformation of quasi-plastic behavior in the MGC, with an intermediate case in the glass-infiltrated alumina. However, as increasing the number of cyclic loading (n=1~n =$10^6$)all materials showed an abrupt strength degradation, at which fracture was originated from damage in the contact fatigue. There were two strength degradation with increasing the number of cyclic loading in specific loads (200N, 500N, 1000N):first was from the cone cracks, and second was from the radial cracks created by cyclic loading. The radial cracks, once formed, led to rapid degradation in strength properties, Finally the material was failed at the high number of cyclic loading. Strength degradation with indentation load at fixed number of cyclic loading indicated that the feldspathic porcelain should be highly damage tolerant to the contact fatigue.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.247-254
• /
• 2005

General composition, total anthocyan content, and antioxidative and antimicrobial activities of Korean purple. fleshed potatoes (varieties A-D based on coloring degree of cross sections) were investigated. Slight differences in composition content were observed among varieties. Color intensity analyzed by sensory evaluation test decreased in order of PL-14, 31, 28, 3, 17, and 6, Total anthocyanin contents differed significantly among varieties from 3 to 29 mg Per 100 g, and decreased in order of PL-28, 31, 14, 12, 5, and 3. PL-28, 31, and Jasim potatoes showed slightly higher antioxidant activities than ${\alpha}$-tocopherol. PL-28, 31, 6, and Jasim showed antimicrobial activities against three species each of Gram-positive and-negative bacteria, with highest activities observed against Bacillus subtilis and relatively high activities against E. coli.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.171-182
• /
• 1994

Dissolved free amino acid (DFAA) dissolved hydrolyzable amino acid (DHAA) and D/L amino acid racemic ratio in the dissolved organic compounds were studied to investigate the biogeochemical characteristics of dissolved organic compound in the Yellow Sea. Concentration of total DFAA ranged from 0.06 uM to 0.26 uM in the study area. DFAA composition showed that aspiratae, glutamate, serine, glycine and alanine were predominant. According to characteristics of functional group of amino acid, these belonged to hydroponic group. C-18 short column cartridge (Sep-Pak) activated by methanol was used to extract organic macromolecules in the seawater. In operational scheme, macromolecules were divided into two fractions. Geomacromolecule fraction eluted with 50% methanol was used to extract organic macromolecules in the seawater. In operational scheme, macromolecules were divided into two fractions. Geomacromolecule fraction eluted with 50% methanol was moderately hydrophilic and showed characteristics of humic substance in the seawater. Biomacromolecule fraction eluted with 100% methanol was hydrophobic and most abundant in the surface seawater samples. DHAA was much higher than DFAA in this study area. DHAA ranged from 2.05 uM to 6.19 uM in the B-fraction and from 8.13 uM to 24.46 uM in the G-fraction. DHAA was higher in the surface water than in the bottom water where the vertical stratification developed well. The result of HPLC analysis of D/L amino acid showed that low racemic ratio was found in the B-fraction. It implies that the B-fraction is relatively younger than the G-fraction and freshly derived from biosphere.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.233-241
• /
• 2002

Seasonal variation of uraenesox cinereus) muscle was investigated. Crude lipid content varied from 3.85 to 12.59 g/100g, comprising the highest content in November. The major fatty acids of total lipid, neutral lipid, and phospholipid were C16:0, C23:0, C16:1, C18:1, C20:5, and C22:6, but in phospholipid, Cl8:3n-6 was also the major fatty acid. The C22:6 content of the neutral lipid was much lower compared to that of the total lipid and phospholipid. The content of polyunsaturated fatty acids (ranged from 73.93 to 66.23%) in phospholipid was higher than that of any other lipid fraction. In glycolipid, C20:1 and C14:1 were higher compared to those of any other lipid fraction, but C20:5 and C22:6 were lower. The annual average ratio of n-3 to n-6 of total lipid, neutral lipid, phospholipid, and glycolipid was 10.82, 12.27, 6.63, and 6.50, respectively. The particular trend of seasonal variation of fatty acid composition was not showed in total and neutral lipid. However, the samples caught in September and November had a high crude lipid content with a significantly lower content of polyunsaturated fatty acids in phospholipid. Also, the content of monounsaturated fatty acids in glycolipid was lower in samples of September, November, and January.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.280-284
• /
• 1989

The soil texture and the physico-chemical characteristics of 442,000ha reclaimable tide land in the south-western of korean peninsular were analysed. The subsidence which may occur as the soil ripened was studied. The results were as follows : 1. Among the 257,000ha of existing reclaimed tidal land 53.0% was tine silty soil and 36.0% coarse silty, 6.0% coarse loamy and 5.0% sandy soils, respectively. 2. Out of the total 442,000ha of reclaimable tidal land, 51.0% was coarse silty soil, and 20% sandy, 15.0% coarse loamy and 14.0% fine silty textural family, respectively. The coarse silty deposits were mainly distributed in the Gyeong gi and Jeonnam coast, while the coarse deposits(Coarse Loamy-sandy) exist in the Jeonbuk coastal area, but in the Chungnam areas there were various textural grades. 3. Reclaimable tidal Land in the south-western part of the peninsular was Classified into saline and alkaline soil. Electric Conductivity in saturation extract was extremely high that was 46~51 mmhos/cm, E.S.P was more than 25% and pH was ranged around 7.5~8.0 4. Reclaimed to cultivated field the subsidence reclaimable tide land to be expected when was about 18% in Soil and 21% in Sicl soils calculated down to 1.25m of the profile.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.3
• /
• pp.265-273
• /
• 2019

This study was performed to evaluate clinical use of laser fluorescence (LF) to identify early childhood caries lesions suitable for applying resin infiltration. 20 exfoliated primary molars with proximal caries were selected and cut buccolingually cross the central pit for regarding the mesial and distal surfaces respectively. 27 specimens corresponding to ICDAS code 1 and 2 were selected and the LF values were measured. When infiltrant resin was applied, double staining for microscopy detection has done simultaneously. Tooth samples were sliced with 0.7 mm thick. The maximum lesion depth, maximum penetration depth, and average penetration rate were measured from the confocal scanning laser microscope image. Pearson correlation analysis was performed. The intraclass correlation coefficient of LF values shows excellent agreement. LF values had positive correlation with penetration rate, but not lesion depth and penetration depth. Significant correlation between LF readings and penetration rate was verified in deep enamel caries and dentin caries except shallow enamel caries. Infiltrant resin could penetrate with a higher rate and LF values could be increased in more active caries lesions. In assessing radiologically similar caries lesion, laser fluorescence might be useful for identifying caries activity.

• Clean Technology
• /
• v.27 no.2
• /
• pp.152-159
• /
• 2021

Volatile organic compounds (VOCs) occur in indoor and outdoor industrial and urban areas and cause environmental problems. Malodorous VOCs, along with aesthetic discomfort, can have a serious effect on the human body. Compared with the existing method of reducing malodorous VOCs, a wet scrubbing method using an electrolytic oxidant has the advantage of reducing pollutants and regenerating oxidants. This study investigated the optimal conditions for producing OCl^-, a chlorine-oxidant. Experiments were conducted by changing the type of anode and cathode electrode, the type of electrolyte, the concentration of electrolytes, and the current density. With Ti/IrO₂ as the anode electrode and Ti as the cathode electrode, OClproduction was highest and most stable. Although OCl^- production was similar with the use of KCl or NaCl, NaCl is preferable because it is cheap and easy to obtain. The effect of NaCl concentration and current density was examined, and the OCl^- production rate and concentration were highest at 0.75 M NaCl and 0.03 A cm^-2. However, considering the cost of electric power, OCl^- production under the conditions of 1.00 M NaCl and 0.01 A cm^-2 was most effective among the conditions examined. It is desirable to produce OCl^- by adjusting the current density in accordance with the concentration and characteristics of pollutants.

• Tunnel and Underground Space
• /
• v.30 no.6
• /
• pp.573-590
• /
• 2020

This study presents the current status of DECOVALEX-2023 project Task G and our research results so far. Task G, named 'Safety ImplicAtions of Fluid Flow, Shear, Thermal and Reaction Processes within Crystalline Rock Fracture NETworks (SAFENET)' aims at developing a numerical method to simulate the fracture creation and propagation, and the coupled thermohydro-mechanical processes in fracture in crystalline rocks. The first research step of Task G is a benchmark simulation, which is designed for research teams to make their modelling codes more robust and verify whether the models can represent an analytical solution for displacements of a single rock fracture. We reproduced the mechanical behavior of rock and embedded single fracture using a three-dimensional grain-based distinct element model for the simulations. In this method, the structure of the rock was represented by an assembly of rigid tetrahedral grains moving independently of each other, and the mechanical interactions at the grains and their contacts were calculated using 3DEC. The simulation results revealed that the stresses induced along the embedded fracture in the model were relatively low compared to those calculated by stress analysis due to stress redistribution and constrained fracture displacements. The fracture normal and shear displacements of the numerical model showed good agreement with the analytical solutions. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated using various experiments in a further study.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.37-46
• /
• 2023

In this paper, the physical properties, stress deformation and strength characteristics, density and permeability characteristics of silty sand (SM) by fines content were analyzed through indoor tests. also based on the results of the indoor tests, a compact analysis was performed according to the content of SM, and the applicability of SM ground to the compacted target layer was evaluated by comparing it with the measurement data of the actual problem site. As a result of indoor tests and compression analysis, SM changed its mechanical properties from sandy soil to viscous soil when the fine particle content was 35% or higher, and using field measurement data, SM was found to have a higher compression tendency than direct subsidence. Therefore, the mechanical characteristics of SM above Fc 35% are considered to be similar to that of viscous soil, which is different from the compression characteristics of the tendency of immediate subsidence to conventional sandy soil, so it is necessary to present the mechanical characteristics of SM through further research. The research findings highlight the importance of considering consolidation settlement in silty sand (SM) when evaluating soft soil conditions. These findings can aid in revising criteria for assessing weak ground conditions by providing essential engineering property data based on varying fines content in silty sand.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.1
• /
• pp.35-44
• /
• 2006

In general typically granular soils contain a certain amount of fines. It is also widely recognized that foundation soils under working loads show highly non-linear behavior from very early stages of loading. In the present study, a series of laboratory tests with sands of different silt contents are conducted and methods to assess strength and stiffiness characteristics are proposed. Modified hyperbolic stress-strain model is used to analyze non-linearity of silty sands in terms of non-linear Degradation parameters f and g as a function of silt contents and Relative density Dr. Stress-strain curves were obtained from a series of triaxial tests on sands containing different amounts of silt. Initial shear modulus, which is used to normalize Degradation modulus of silty sands, was determined from resonant column test results. From the laboratory test results, it was observed that, as the Relative density increases, values of f decrease and those of g increase. In addition, it was found that values of f and g increase and decrease respectively as a Skeleton void ratio $(e_{sk})$ increases.