• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.3
• /
• pp.265-273
• /
• 1984

To investigate nitrogen supplying effect of some slowrelease N-fertilizers on barley in upland soil sulfurcoated urea(SCU), ureaform and melamine (1,3,5-Triazine-2,4,6-triamine) were treated and compared to urea. In addition, thiourea as a nitrification inhibitor was also tested. Effects of variable soil condition such as moisture content, pH and temperature on nitrogen supplying ability of the fertilizers and on growth of barley were studied through incubation test and pot culture and the obtained results were summarized as follows: The releasing rate of ammonia from urea, SCU, ureaform and melamine were resulted as 27-59%, 25-39%, 9-34% and 0.7-4.3% at maximum conversion rate, respectively. Nitrification rate of the tested fertilizers was higher at pH 6.54 markedly than at pH 4.73. Addition of thourea depressed the formation of $NO_3$ during four weeks of incubation period. Mixed application of ureaform with small amount of urea contributed to nitrogen supply till latter growth stage of barely Basal application of melamine showed lowest nitrogen supplying ability and injurious response on barley growth.

• Journal of dental hygiene science
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2008

Effects of sodium fluoride exposure on the amelogenesis during fetal formation were investigated using 11 days rat incisor of control group and two experimental groups. According to results of morphological analysis using an electron microscope, enamel organ in the rat incisor consisted of presecretory, secretory, and maturation zone, especially maturation zone had ruffle-ended ameloblasts (rAB) that additionally supply inorganic ions and smooth-ended ameloblasts (sAB) that remove water and organic compounds. Such a histological composition was same in fetal and adult rats. According to experimental results using calcein (green fluorescence) in order to reveal the modulation cycle of ameloblast, modulation cycle of experimental group decreased on an average one time than control group, as increase of density of sodium fluoride indicated that thickness of smooth-ended ameloblast decreased. Also ratio of thickness on sagittal total length of sAB increased than rAB in experimental groups than control group. In total length of teeth, an injected 100 ppm sodium fluoride group was similar control group but as injected 200 ppm group became short. In experimental group, thickness of sAB and rAB became narrow to the tip of cutting edge. According to concentration of sodium fluoride grows, the modulation cycle and total length of teeth were decreased, finally it prevented teeth growth.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.96-105
• /
• 2019

Automobile shredder residue (ASR) is the final waste produced when end-of-life vehicles (ELVs) are shredded. ASR can be separated using mineral-processing operations such as comminution, air classification, magnetic separation, and/or electrostatic separation. In this work, trajectory analyses of conductors (copper) and non-conductors (glass) in the ASR have been carried out using induction electrostatic separator for predicting or improving the ASR-separation efficiency. From results of trajectory analysis for conductors, the trajectories of copper wire by observation versus simulation for coarse particles of 0.5 and 0.25 mm showed consistent congruity. The observed 0.06 mm fine-particles trajectory was deflected toward the (-) attractive electrode owing to the charge-density effects due to the particle characteristics and relative humidity. In the case of non-conductors, the actual trajectory of dielectric glass deflected toward the (-) electrode, showing characteristics similar to those of conductive particles. The analyses of stereoscopic microscope and SEM & EDS found heterologous materials (fine ferrous particles and conductive organics) on the glass surface. This demonstrates the glass decreasing separation efficiency for non-ferrous metals during electrostatic separation for the recycling of ASR. Future work will require a pretreatment process for eliminating impurities from the glass and advanced trajectory-simulation processes.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.10
• /
• pp.474-492
• /
• 2007

In the protein interaction network, there are many meaningful functional modules, each involving several protein interactions to perform discrete functions. Pathways and protein complexes are the examples of the functional modules. In this paper, we propose a new method for detecting the functional modules based on concept. A conceptual functional module, briefly concept module is introduced to match the modules taking them as its instances. It is defined by the corresponding rule composed of triples and operators between the triples. The triples represent conceptual relations reifying the protein interactions of a module, and the operators specify the structure of the module with the relations. Furthermore, users can define a composite concept module by the counterpart rule which, in turn, is defined in terms of the predefined rules. The concept module makes it possible to detect functional modules that are conceptually similar as well as structurally identical to users' queries. The rules are managed in the XML format so that they can be easily applied to other networks of different species. In this paper, we also provide a visualized environment for intuitionally describing complexly structured rules.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.426-432
• /
• 2008

We introduce a method of rendering a scene lying 3D objects which is like that artist draw on a canvas by brushing. Painting is the art area presenting something created by color and line on 2D plane. We are brushing on billboards on screen space for the 2D brushing effect according to the definition of "Painting". Brushing orientation is haven to rotate for preventing the orientation in the first scene in the case that object or camera are moving. If the brushing isn't rotated, shower-door effect is watched on the scene as undesirable result We present a brushing rotating method for keeping the orientation changing the direction of view and object rigid animation. The brushing direction is computed with Horn's 2D similarity transform by least-square solution. We watched the changing brushing to track the motion of object and view.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.422-428
• /
• 2010

Giomer is fluoride-releasing, resin-based dental materials that comprise PRG(pre-reacted glass ionomer) filler. The purpose of this study was to evaluate the shear bond strength of Giomer using self-etching primer systems to bovine dentin. Bovine incisors were mounted in self-curing orthodontic resin and the facial surfaces were wet ground on SIC paper to expose the dentin. Total 100 samples were made and divided randomly into 4 groups, Giomer group(I), Composite resin group(II) and Compomer group(III), Giomer and single bottle adhesive group(IV). The shear bond strengths of 25 samples per each group were measured using universal testing machine. And data were analyzed statistically with One-way ANOVA and Scheffe test. Giomer group(I) showed the significantly higher bond strength than Compomer group(III)(p<0.05). There was no significant difference between Giomer group(I) and Composite resin group(II)(p>0.05). And there is no significant difference between gourp(I) and group(IV). Based on the results of present study, the use of Giomer as an esthetic restorative material for primary teeth might be justified. It is considered that more study about the fluoride releasing ability is needed to evaluate the anticariogenic effect of giomer.

• The Korean Journal of Food And Nutrition
• /
• v.18 no.1
• /
• pp.63-71
• /
• 2005

Panax ginseng leaves are produced as the by-product when Panax ginseng roots were harvested. The Panax ginseng leaves was examed for the applicable possibility as the functional food. In this study, the changes in chemical composition of Panax ginseng leaves was examed by three methods as the hot-air dried(DRT), the aged tea(AGT) and the heat processed tea(HPT). The general composition of Panax ginseng leaves tea was shown as similar results in 3 different process methods. The level of the crude lipid and reducing sugar concentration were decreased slightly in HPT. The free sugar content of DRT was higher than the HPT and AGT. The existence of the higher content of free sugar composition in order are sucrose, fructose and glucose. The concentration of serine was the highest in the free amino acids, which were shown from 309.6 mg% to 336.6 mg%. The contents of free amino acid in Panax ginseng leaves made by DRT was higher than by AGT and HPT. The concentration of Ca was shown as the highest content among the minerals and was 2,115 mg%. The contents of minerals were existed in order of Ca, K, Mg, P, Na, Mn, Fe, Zn and Cu. But there were hardly any remarkable differences of mineral concentrations of Panax ginseng leaves tea made by different processing methods. The concentration of water soluble solid of Panax ginseng leaves tea processed by HPT was higher than by DRT and AGT. The concentration of ascorbic acid was shown the highest value of 424.4mg% in HPT. There was no differences in the fatty acid composition according to their processing methods. The concentration of palmitic acid was higher than that of other fatty acid. The order of fatty acid concentration were palmitic aicd, linoleic acid, linolenic acid, oleic acid and stearic acid, abundantly. As a conclusion, HPT was shown as the best process method for the production of Panax ginseng leaves tea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.449-453
• /
• 2005

하천의 물리적 생태적 특성에 대한 연구는 하천유형분류의 기초 자료로서 큰 의미가 있다. 그러나 국내의 경우 이를 위한 하천의 조사는 매우 드물며, 국부적이었다. 더욱이 이러한 생태적 물리적 특성을 근거로 한 하천 유형적 특성을 연구한 사례는 없었다. 본 연구에서는 하천의 유형을 분류하는 것은 아니지만 하천을 더욱 효율적으로 계획하고 관리하는데 필요한 기초자료를 구축하고자 하였다. 그리하여 1차적 연구로 자연환경이 유사한 하천들을 일시에 선정하여 동일한 방법으로 각 하천의 물리적 생태적 특성을 조사하고 평가하여 대상 하천의 공통적 특성을 가려내고자 하였다. 이와 관련하여 본 연구에서는 하천의 물리적 구조조사법을 유럽공동체에서 사용하는 기준과 방법에 따라 시범적으로 실시하여 국내하천의 하천환경조사를 위한 적용성 여부도 진단하고자 하였다. 하천의 물리적 구조등급이란 하천의 공간적 환경과 저수로 하상재료의 물리적 차이를 의미하는 것으로 하천 자체는 물론 하천범람지에 영향을 주는 생태적 기능의 수리 특성, 하천의 물리 특성, 수생태 특성 등을 포괄하게 된다. 따라서 하천의 물리적 구조등급은 하천구조의 생태적 질과 하천구조로 나타나게 되는 동적 과정(dynamic process)의 질을 평가하는 척도가 될 수 있다. 본 연구에서는 남한강수계의 청미천, 양화천, 복하천을 대상으로 물리적 구조조사법과 식생조사를 병행하였으며 이로부터 하천의 물리적 구조등급이 수질등급과 정량적이지는 않지만 전반적인 하천의 생태성 또는 자연도를 가늠할 수 있는 하나의 지료로 활용할 수 있음을 알 수 있었다.양토를 기준으로 할 때 강우량과 침투수의 관계는 $I_{10}(mm)=0.44R(mm)+5.8(r^2=0.55)$이었다. y절이 발생한 이유는 이전 강우에 의해 침투되고 있는 물이 있음을 함축하며 기울기 0.40은 강우의 $40\%$가 지하로 침투하였음을 의미한다. 침투수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 1.12로 가장 컸고, 식양토 0.94, 식토 0.91로 평가되었다. 이는 토성간의 침투속도 및 투수속도의 경향이 반영된 것이다. 경사에 따라서는 경사도가 증가할수록 지수적으로 감소하였으며 $10\% 경사일 때를 기준으로 $I(mm)=I_{10}{\times}1.17{\times}e^{-0.0164s(\%)}$로 나타났다. 같은 조건에서 강우량과 유거수의 관계는 $Ro_{10}(mm)=5.32e^{0.11R(mm)}(r^2=0.69)$로 나타났다. 이는 토양의 투수특성에 따라 강우량 증가에 비례하여 점증하는 침투수와 구분되는 현상이었다. 경사와 토양이 같은 조건에서 나지의 경우 역시 $Ro_{B10}(mm)=20.3e^{0.08R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사

• The Journal of the Petrological Society of Korea
• /
• v.9 no.3
• /
• pp.187-203
• /
• 2000

Mafic microgranular enclaves (MME) occur in the granites from the Bohyunsan area. The host granites are generally of granodioritic and granitic compositions. The MME can be divided into magic mineral clusters, quartz diorite and diorite according to their occurrence. Halter variation diagrams show linear trends between the MME and the host granites. Though the rim compositions of plagioclase in the host granites and the MME are similar the core compositions of plagioclase in some host granites show abnormally high An content. The Mg/(Mg+Fe) ratio of hornblende in the host granites gradually increase from the core to the rim. The chemical composition of minerals in the host granites had been affected by more marc magma composition. The modelling of major elements of the MME and hybrid host granites also indicate that they result from simple mingling/mixing between a dioritic magma and the host granite magma. The MME are thus interpreted to be globules of a more mafic magma which intruded the granite magma. Partial equilibration has been achieved between the MME and the host granites after they were commingled with each other.

• Current Research on Agriculture and Life Sciences
• /
• v.28
• /
• pp.47-52
• /
• 2010

This study was carried out to investigate the availability of covering material used for raising seedlings in the rice nursery bed. The pre-germinated seeds of a rice cultivar 'Chilbo' were sown into seedling tray ($60{\times}30{\times}2.5cm$) on 20th April and 3rd May 2010. Polypropylene spunbonded fabric (PSF) and lagging were used for covering materials in rice nursery bed. The growth characteristics of seedlings were evaluated at 8, 15 and 25 days after sowing (DAS) in the nursery beds covered with PSF and lagging, respectively. The plant height of 8-day old seedlings grown in lagging nursery bed was longer by 2cm than those in PSF nursery bed when the seeds were sown on 20th April, but seedling quality grown in lagging nursery bed was poor compared with that in PSF nursery bed. The growth characteristics of 15-day old seedlings were similar to that of 8-day old seedlings. The plant height of 8, 15 and 25-day old seedlings grown in lagging nursery was longer than those in PSF nursery when the seeds were sown on 3rd May. The seedling quality grown in PSF nursery was better than that in lagging nursery. The seedlings grown in PSF nursery have more leaves and better seedling quality compared with that of lagging nursery. The seedling quality was remarkably decreased with the increase of nursery period in lagging bed but seedlings quality were recovered at 5 days after hardening treatment by removing the lagging.