• Tuberculosis and Respiratory Diseases
• /
• v.55 no.3
• /
• pp.257-266
• /
• 2003

Background : The surfactant protein A(SP-A) is important in the regulation of surfactant secretion, synthesis and recycling. Since the acute respiratory distress syndrome(ARDS) is usually viewed as the functional and morphological expression of a similar underlying lung injury casued by a variety of insults and since abnormalities in surfactant function have been described in ARDS, the authors investigated the different effects of endotoxin and thiourea on the accumulation of mRNA encoding SP-A. Methods : Sprague-Dawley rats were given 5 mg/kg intraperitoneal endotoxin from Salmonella enteritidis and 3.5 mg/kg intraperitoneal thiourea and sacrified at different time periods. Results : 1) SP-A mRNA was significantly increased 67.0% in 6 hours and 73.4% in 24 hours after 5 mg/kg endotoxin treatment respectively(P<0.005, P<0.005). 2) SP-A mRNA significantly decreased 32.9% in 24 hours after 3.5 mg/kg thiourea treatment(P<0.05). Conclusions : These results indicate that the differential regulation of surfactant protein A in vivo is evident and suggest that surfactant protein A might be differentially regulated during different kind of insults of lung injury at different time periods without altering lung wet to dry ratios.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.300-305
• /
• 2011

Objectives: The aim of this study was to evaluate the various NiTi rotary instruments regarding their ability to provide a circular apical preparation. Materials and Methods: 50 single canal roots were selected, cut at the cementodentinal junction and the coronal 1/3 of the canals was flared using Gates Glidden burs. Samples were randomly divided into 5 experimental groups of 10 each. In group I, GT files, Profile 04 and Quantec #9 and #10 files were used. In Group II Lightspeed was used instead of Quantec. In Group III, Orifice shaper, Profile .06 series and Lightspeed were used. In Group IV, Quantec #9 and #10 files were used instead of Lightspeed. In Group V, the GT file and the Profile .04 series were used to prepare the entire canal length. All tooth samples were cut at 1 mm, 3 mm and 5 mm from the apex and were examined under the microscope. Results: Groups II and III (Lightspeed) showed a more circular preparation in the apical 1mm samples than the groups that used Quantec (Group I & IV) or GT files and Profile .04 series.(Group V)(p < 0.05) There was no significant difference statistically among the apical 3, 5 mm samples. In 5 mm samples, most of the samples showed complete circularity and none of them showed irregular shape. Conclusions: Lightspeed showed circular preparation at apical 1 mm more frequently than other instruments used in this study. However only 35% of samples showed circularity even in the Lightspeed Group which were enlarged 3 ISO size from the initial apical binding file (IAF) size. So it must be considered that enlarging 3 ISO size isn't enough to make round preparation.

• Applied Biological Chemistry
• /
• v.7
• /
• pp.21-27
• /
• 1966

This experiment was performed to investigate the effect of the frequency of meals on the metatolism and the body composition of rats when equal amount of purified diet was ingested. Thirty approximately days old rats weighing 290 g and thirty-two about 40 days old rats weighing 180 g were employed for the period of 34 days. Rats fed ad libitum (10 to 15 meals per day) and two-meal per day were pair-fed and equal amount of diet was fed to each rat in pair. The experimental results obtained are summarized as follows: 1. Frequency of meal did not exert any effect on the body weight gain. However, rats fed two-meal per· day gained significantly (p <0.005) more fat and energy than ad libitum group. The rate of gain of protein in ad libitum group was higher than that of two-meal group. No difference was observed for the mineral deposition of rat body. 2. From the preperation of rat liver it was found that the activity of glucose-6-phosphate dehydrogenase was much higher for the rats fed two-meals per day than those fed ad libitum. Therefore, it is suggested that the metabolic pathway of carbohydrate for two-meal group has been shifted from glycolysis to Hexose Monophosphate Shunt and produced more NADPH which would be the essential cofactor of fatty acids synthesis. 3. The rate of excretion of urinary nitrogen for two-meal group was significantly (p<0.005) higher than that of ad libitum group. It is apparent that considerable amount of over-loaded amino acids by feeding two-big-meal daily· could not be used for the protein biosynthesis all at once and excreted following deamination through urine. The residual carbon chain could be served as a precursor of fatty acids synthesis. 4. The heat production rate of rats fed two-meal group was significantly (p<0.005) lower than that of ad libitum group. It seems possible that the activity of thyroid gland (and consequently BMR) can be depressed by the frequency of meal.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.23-33
• /
• 2004

The Lago Sofia conglomerate in southern Chile is a lenticular unit encased within mudstone-dominated, deep-sea successions (Cerro Toro Formation, upper Cretaceous), extending from north to south for more than $120{\cal}km$. The Lago Sofia conglomerate is a unique example of long, gravelly deep-sea channels, which are rare in the modern environments. In the northern part (areas of Lago Pehoe and Laguna Goic), the conglomerate unit consists of 3-5 conglomerate bodies intervened by mudstone sequences. Paleocurrent data from these bodies indicate sediment transport to the east, south, and southeart. The conglomerate bodies in the northern Part are interpreted as the tributary channels that drained down the Paleoslope and converged to form N-S-trending trunk channels. In the southern part (Lago Sofia section), the conglomerate unit comprises a thick (> 300 m) conglomerate body, which probably formed in axial trunk channels of the N-5-trending foredeep trough. The well-exposed Lago Sofia section allowed for detailed investigation of sedimentary facies and large-scale architecture of the deepsea channel conglomerate. The conglomerate in Lago Sofia section comprises stratified conglomerate, massive-to-graded conglomerate, and diamictite, which represent bedload deposition under turbidity currents, deposition by high-density turbidity currents, and muddy debris flows, respectively. Paleocurrent data suggest that the debris flows originated from the failure of nearby channel banks or slopes flanking the channel system, whereas the turbidity currents flowed parallel to the orientation of the overall channel system. Architectural elements produced by turbidity currents represent vertical stacking of gravel sheets, lateral accretion of gravel bars, migration of gravel dunes, and filling of channel thalwegs and scoured hollows, similar to those in terrestrial gravel-bed braided rivers. Observations of large-scale stratal pattern reveal that the channel bodies are offset stacked toward the east, suggestive of an eastward migration of the axial trunk channel. The eastward channel migration is probably due to tectonic tilting related to the uplift of the Andean protocordillera just west of the Lago Sofia deep-sea channel system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.108-125
• /
• 2013

This study examined the actual reconstruction drawing, composite mineral, particle size and property test, fine organic matters, color differences and main ingredients of the earthen mold excavated in Dongcheon-dong, Gyungju. The cross-section of the inner mold and outer mold divides into inside (1st layer) and outside (2nd layer), with organic matters mixed outside. The cross-section has been altered due to heat and form removal agent. X-ray analysis revealed that the layer was made of minerals with high transmissivity and only quartz particles were observed through a polarizing microscope. The inside of cross-section in SEM observation identified enlarged air gap, with crack developed in the center, but no changes observed on the outside. The particle size of the composites is almost the same for the inner mold and outer mold and is silt clay loam. The ratio between silt clay and silt clay loam was about 2.7:1 and 2.9:1 respectively. In the property test, the density and absorption rate of inner mold and outer mold were similar, but porosity was different, with inner mold of 27.36% and outer mold of 31.09%. The color difference of cross-section seems to have been caused by the spread of soot on the 1st layer surface for removal of form or by the covering of ink to protect the 1st layer. Composite mineral analysis revealed the same composition for the inner mold and outer mold, except for the magnetite that was detected in the inner mold alone. As for the main ingredient analysis, the average content of $SiO_2$ was 71.64% and that of $Al_2O_3$ was 14.59%. As for the sub-ingredients, $Fe_2O_3$ was 4.51%, $K_2O$ 3.06%, $Na_2O$, MgO, CaO, $TiO_2$, $P_2O_5$ and MnO was less than 2%.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.111-119
• /
• 2021

A bacterial strain isolated from a Malva verticillata leaf was identified as Bacillus velezensis MV2 based on the 16S rRNA sequencing results. Complete genome sequencing revealed that B. velezensis MV2 possessed a single 4,191,702-bp contig with 45.57% GC content. Generally, Bacillus spp. are known to produce diverse antimicrobial compounds including bacteriocins, polyketides, and non-ribosomal peptides. Antimicrobial compounds in the B. velezensis MV2 were extracted from culture supernatants using hydrophobic interaction chromatography. The crude extracts showed antimicrobial activity against both gram-positive bacteria and gram-negative bacteria; however, they were more effective against gram-positive bacteria. The extracts also showed antifungal activity against phytopathogenic fungi such as Fusarium fujikuroi and F. graminearum. In time-kill assays, these antimicrobial compounds showed bactericidal activity against Bacillus cereus, used as indicator strain. To predict the type of antimicrobial compounds produced by this strain, we used the antiSMASH algorithm. Forty-seven secondary metabolites were predicted to be synthesized in MV2, and among them, fourteen were identified with a similarity of 80% or more with those previously identified. Based on the antimicrobial properties, the antimicrobial compounds may be nonribosomal peptides or polyketides. These compounds possess the potential to be used as biopesticides in the food and agricultural industry as an alternative to antibiotics.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.581-586
• /
• 2020

In this study, we investigated the illegal hazardous compounds in dietary supplements. We analyzed the contents of anti-obesity drugs, their analogues (orlistat, sibutramine, desmethylsibutramine, didesmethylsibutramine, chlorosibutramine, chlorosipentramine) and three heavy metals (lead (Pb), cadmium (Cd), arsenic (As)) in 62 other processed products (n=32), candies (n=7), weight control foods (n=10) and teas (n=13). Anti-obesity drugs or their analogues were not detected in any of the 62 samples. Three heavy metals (Pb, Cd, As) were detected in the range of ND-0.177 mg/kg, 0.002-0.233 mg/kg and 0.001-0.188 mg/kg in teas, ND-0.370 mg/kg, 0.003-0.057 mg/kg and 0.007-0.120 mg/kg in candies, ND-0.055 mg/kg, 0.012-0.045 mg/kg and 0.010-0.163 mg/kg in weight control foods, respectively. Heavy metals (Pb, Cd, As) were detected in the range of ND-2.324 mg/kg, 0.004-0.936 mg/kg and 0.003-21.247 mg/kg in other processed products that are not regulated by specification standards according to food types. These results show that regulations of heavy metals is required in other processed products for genuine food safety.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.1
• /
• pp.77-83
• /
• 2009

This study was conducted to investigate the chemical composition and biological function of tea made from mountain-cultivated ginseng leaves. The antioxidant activities of tea made from mountain-cultivated ginseng leaves were determined by measuring their electron-donating ability based on their DPPH and nitrite-scavenging ability. The electron-donating abilities of tea made from mountain-cultivated ginseng leaves (500 and 1,000 ppm) as determined by DPPH assay were 45.6 and 85.1%, respectively. The nitrite scavenging ability of tea made from mountain-cultivated ginseng leaves (500 and 1,000 ppm) at pH 6.0 were 32.8 and 51.4%, respectively. Furthermore, the nitrite scavenging activity increased in a dose-dependent manner at all pH values. The effects of tea made from mountain-cultivated ginseng leaves on Male Sprague-Dawley rats were also evaluated. To accomplish this, the rats were divided into three groups (A: normal diet group, B: high fat diet group and C: high fat diet supplemented with tea made from mountain-cultivated ginseng leaves group). The anti-obesity effects of tea made from mountain-cultivated ginseng leaves were then evaluated. The serum total lipid, total cholesterol and triglyceride contents in C group were lower than those of B group; however, these differences were not statistically significant. The HDL-cholesterol content was significantly higher in the C group than in the other groups. Taken together the results of this study suggest that tea made from mountain-cultivated ginseng leaves possesses antioxidant activity and improves lipid metabolism.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.313-321
• /
• 2023

Platycodon grandiflorus (P. grandiflorus) flower is a perennial plant belonging to the family Campanulaceae and has many excellent pharmacological effects, so it has been used as a medicinal ingredient since ancient times. In addition, anthocyanin is a purple or blue natural pigment contained in plant flowers and fruits, and is known as a powerful antioxidant. The purpose of this study was to confirm the dermatological functionality of P. grandiflorus flower extract and the value of the bluish anthocyanin contained in flowers as a cosmetic material as a natural pigment. Firstly, 50% ethanol and 80% ethanol were added to the P. grandiflorus flower and extracted under reflux for 4 h at 25, 60, and 80 ℃, and the pH of each treatment group was similar. Based on the anthocyanin content and chromaticity (E^*ab), 50% ethanol 60 ℃ extraction conditions showing the color development most similar to the natural color of the P. grandifloras flower were selected, and a sample was prepared by concentrating and lyophilizing. The analysis results showed that the total phenol, total flavonoid, and total anthocyanin contents were in the ranges of 23 ㎍/mL, 16 ㎍/mL, and 0.17 ㎍/mL, respectively. The P. grandiflorus flower extract suppressed the production of nitric oxide (NO) and interleukin-6 (IL-6) in lipopolysaccharide (LPS) induced RAW264.7 cells. Furthermore, the P. grandiflorus flower extract showed wound healing effects through the promotion of skin cell migration in TNF-α stimulated human keratinocytes. The stability of anthocyanin and extract color was studied during a storage period of 50 days at various temperatures (4 ℃, 25 ℃, and 45 ℃). Color values (L, a, and b) of the P. grandiflorus flower extract changed over 50 days, whereas the bluish-purple color of the extract was stabilized using 5% maltodextrin. These results suggest that P. grandiflorus flower extract may be useful as a natural cosmetic pigment.