• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.163-164
• /
• 2014

Pseudolite systems are used for backup systems of GPS satellite or indoor navigation systems. The pseudolite transmits GPS-like signal on the ground. Fundamentally, to estimate a position, clock synchronization among satellites is essential, because GPS receiver uses measurement based on TOA. Therefore, in order to improve the navigation performance in applications using pseudolite, clock synchronization with GPS satellites is required. This paper proposes design of monitoring system for pseudolite clock synchronization. The monitoring system analyzes clock synchronization accuracy of pseudolite and can be used for clock adjustment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.93-96
• /
• 2022

DTW can eliminate gaps between sequences of different lengths and find out the similarity of patterns, but due to the time and space complexity, it requires a high computational cost on large datasets. In this paper, we propose a DDTW algorithm that not only reduces computational costs but also has no error in the results. In addition, the algorithm complexity of DTW and DDTW is compared by measuring the computational time according to the length of the sequence. Simulation results show a noticeable reduction in computational time in DDTW compared to DTW.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.71-80
• /
• 2011

Thresholding is important step for detecting binary change/non-change information in the unsupervised change detection. This study proposes new unsupervised change detection method using Hyperion hyperspectral images, which are expected with data increased demand. A graph is drawn with applying the range average method for the result value through pixel-based similarity measurement, and thresholding value is decided at the maximum distance point from a straight line. The proposed method is assessed in comparison with expectation-maximization algorithm, coner method, Otsu's method using synthetic images and Hyperion hyperspectral images. Throughout the results, we validated that the proposed method can be applied simply and had similar or better performance than the other methods.

• The KIPS Transactions:PartA
• /
• v.15A no.2
• /
• pp.125-134
• /
• 2008

We implemented a system being able to suggest example sentences for multiple choice tests, considering the level of students. To build the system, we designed an automatic method for sentence generation, which made it possible to control the difficulty degree of questions. For the proper evaluation in the multiple choice tests, proper size of question pools is required. To satisfy this requirement, a system which can generate various and numerous questions and their example sentences in a fast way should be used. In this paper, we designed an automatic generation method using a linguistic resource called WordNet. For the automatic generation, firstly, we extracted keywords from the existing sentences with the morphological analysis and candidate terms with similar meaning to the keywords in Korean WordNet space are suggested. When suggesting candidate terms, we transformed the existing Korean WordNet scheme into a new scheme to construct the concept similarity matrix. The similarity degree between concepts can be ranged from 0, representing synonyms relationships, to 9, representing non-connected relationships. By using the degree, we can control the difficulty degree of newly generated questions. We used two methods for evaluating semantic similarity between two concepts. The first one is considering only the distance between two concepts and the second one additionally considers positions of two concepts in the Korean Wordnet space. With these methods, we can build a system which can help the instructors generate new questions and their example sentences with various contents and difficulty degree from existing sentences more easily.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.11
• /
• pp.1019-1025
• /
• 2004

The X-band 10${\times}$10 waveguide slot array antenna for SAR is designed, fabricated and measured. The array antenna is designed using the equivalent circuit model based on the field distribution of the dominant mode, TE$\sub$10/, and EM simulation. The method to decide optimum angle of the centered inclined slot(coupling slot) and the optimum of offset of the longitudinal slot(radiating slot) is provided. The designed antenna structure is EM simulated and fabricated. The measured return loss bandwidth is 180 MHz at 9.15 GHz , the side lobe level is below -25 dB, HPBW is about 9$^{\circ}$, and the gain is 25.5 dB. These results are similar to the simulation data.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.65.1-65.1
• /
• 2016

일반적으로 천체 망원경에 사용되는 반사경은 유리 소재로 제작된다. 그러나 알루미늄을 반사경 소재로 사용하면 광기계구조물과 반사경의 열팽창계수가 유사하여 치수 안정성이 높다는 장점이 있다. 뿐만 아니라 다이아몬드 선삭 기계 (Diamond Turning Machine, DTM)를 이용할 수 있기 때문에 반사경의 가공 시간 및 제작 비용을 절감할 수 있다. 본 연구에서는 알루미늄 합금 (Al6061-T6)을 소재로 구경 150 mm, 초점거리 600 mm인 포물면 반사경을 제작하였다. 우선 DTM을 이용해 알루미늄을 가공하였는데, 이 때 표면 조도와 관련된 고주파 오차 (High Frequency Error, HFE)가 발생한다. 따라서 표면 조도를 향상시키기 위한 추가적인 공정으로써 가공된 표면을 도금한 후 열처리를 하고, 폴리싱과 이중 코팅을 거쳐서 최종 반사경을 얻었다. 각 단계별 공정을 마친 후에는 접촉식 및 광학식 형상 측정 방법으로 표면 측정을 실시하여 이를 분석하였다. 본 발표에서는 각 공정 단계에서의 반사경 표면 분석 결과를 설명할 것이며, 제작된 알루미늄 반사경과 기존의 유리 소재의 반사경을 성능 면에서 비교할 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.93-96
• /
• 2011

본 논문에서는 개선된 FCM 알고리즘을 적용하여 통계청에서 제공하는 한국 표준 질병 사인 분류표(K.C.D)를 기초로 질병을 분류한 후, 질병을 도출하고 애매한 증상의 차이의 정도를 퍼지 추론기법을 사용하여 정확한 질병 상세를 도출할 수 있는 한방 질병 분류 시스템을 제시한다. 기존의 FCM 알고리즘은 입력 벡터들과 각 군집 중심과의 거리를 이용하여 측정된 유사도에 기초한 목적 함수의 최적화 방식을 사용한다. 하지만 측정된 패턴과 군집 공간상의 패턴들의 분포에 따라 바람직하지 못한 군집화 결과를 보일 수 있다. 따라서 본 논문에서는 군집들의 대칭성 측도에 퍼지 이론을 적용하여 기존의 FCM 알고리즘으로 군집화 한 결과를 재 군집화 하여 군집화의 정확성을 개선시킨 후, 증상의 차이를 구분하기 위해서 애매한 증상의 정도를 퍼지 추론 방법을 적용하여 정확한 질병 상세를 도출할 수 있는 방법을 제시한다. 본 논문에서는 개선된 FCM 알고리즘을 적용하여 질병을 분류한 후, 퍼지 제어 기법으로 질병을 추출함으로써 기존의 한방 자가진단 시스템 보다 정확하게 질병을 도출한 것을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.400-405
• /
• 2020

To analyze the flow distribution formed by multiple acoustic sources, the distribution of acoustic streaming speed caused by an ultrasonic transducer composed of two identical piezoelectric vibrators was examined for various angles between the sound sources. In order to measure the distribution of the speed along the acoustic axis of the transducer, a simple measurement method using a droplet indicator having density similar to that of water is suggested. The simulation results calculated by a numerical method and experimental results showed a similar tendency, and the change of flow speed distribution with the intersection angle between acoustic beams radiated from two acoustic sources was analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.196-208
• /
• 2002

Since radio interference has occurred in the TRS frequency band in the south coastal area, Korea from 1994, similar interference has been observed in the mobile-cellular frequency band. Measurement showed that the sources of the radio interference are those from the base stations for digital cellular systems in Japan. This because the receiving frequency of the base stations in Korea is same as the transmitting frequency of the base stations in Japan. Since the distance between Korea and Japan is 240 ~ 300 km, we can conclude that the main reason of the interference is ducting. In this paper a ducting channel is modeled by split-step DMFT algorithm, and simulation results for measured index profile far east coast and west sea area are analyzed.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.254-264
• /
• 2012

Rayleigh-Benard natural convection experiments were carried out as the preliminary experiment to simulate the natural convection of the core melt at the severe accident conditions. This work focused on the influences of plate separation distance(s), the existence of the side walls and crust geometries of upper and lower plates. Based upon the analogy concept, a cupric acid-copper sulfate electroplating system($H_2SO_4-CuSO_4$) was employed as the mass transfer system and measurements were made for $Ra_s$ ranging from $1.06{\times}10^7$ to $2.91{\times}10^{10}$. The test results measured for a single horizontal plate were in good agreement with the correlation reported by McAdams and those for two horizontal plates showed the similar trend to the existing Rayleigh-Benard heat transfer correlations developed by Dropkin and Somerscales, Globe and Dropkin. The measured heat transfer rate decreased with the increasing separation distance between the two plates and became similar to those for a single horizontal plate. Fin arrays mounted on both upper and lower plates enhanced the heat transfer rates. For all cases, the heat transfer rates measured for open side walls are higher than those for closed ones.