• Laser Solutions
• /
• v.18 no.3
• /
• pp.9-13
• /
• 2015

The development of a reliable, high-power source of mind-IR laser light gives process develop important tool with unique characteristics that will significantly impact a diverse range of applications.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1055-1062
• /
• 1988

The characteristics of tool wear and the machinability in cutting of GFRP have been studied. The wear behavior of carbide insert tools(P20, M10, K10) and Cermet in TiC grade was studied by turning of changing the cutting condition. Machinability could be estimated as the following empirical formula, CT$^{n}$ =W The main results obtained are as follows: (1) Dependence of rate of tool wear on cutting speed; with increases of cutting speed, the rate of tool wear initially increases gradually(1st range), then it increases proportionally to cutting speed(2nd range), and finally the rate is constant(3rd range). (2) When the contact length has a main, effect on tool wear, the cutting speed does nit affect the tool wear. On the contrary, the cutting speed has a main effect on tool wear, the contact length does not affect the tool wear. (3) The order of machinability is K10, M10, P20 and Cermet in TiC grade.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.591-598
• /
• 2012

In this study, the cutting characteristics of bulk metallic glass (BMG) cut using a computer numerically controlled (CNC) lathe were investigated for different insert tool materials and cutting speeds. The surface roughness, chip morphology, cutting forces, and tool wear during turning of $Zr_{50}Cu_{40}Al_{10}$ BMG alloy were examined. Four kinds of tool materials were used to cut an 8-mm-diameter BMG. The examination of the surface roughnesses of the BMG specimens machined at each cutting speed showed that the surface roughness became better as the cutting speed increased, and the tool materials also influenced the surface roughness. The chip morphology investigations showed that the unoxidized BMG chips had serrated curled chips with adiabatic shear bands, while the oxidized chips exhibited local melting and tangling rather than the usual spiral-shaped chips. The cutting force induced during machining of the Zr-based BMG was the largest for the TiN-WC tool, followed by the polycrystalline diamond (PCD) tool. The cermet tool exerted the smallest cutting force.

• The Optical Journal
• /
• s.98
• /
• pp.68-74
• /
• 2005

최근 실리콘 웨이퍼 등 취성 재료에 있어 표면 거칠기나 마이크로 크랙 등 표면 품질과 함께 형상 정밀도에 대한 요구가 높아지고 있다. 본 고에서는 경취 재료의 초정밀 가공으로서 광학 유리재를 대상으로 하여 다이아몬드 절삭에 의한 임계 절입 깊이를 실험적으로 조사한 결과와 메탈 본드 다이아몬드 지석을 이용한 초정밀 경면 절삭 기술에 대해 소개한다.

• The Optical Journal
• /
• s.96
• /
• pp.49-54
• /
• 2005

프로젝션 TV, 비디오 카메라나 CD 등과 같은 전자 광학((Electro-optics) 제품 시장이 확대되고 있다. 이들 제품의 광학 부품을 소형경량화·고성능화·저가격화 하기 위해 각 제조업체에서 독자적인 비구면 가공 기술을 개발하고 있으며, 종전의 유리 렌즈에서 좀더 가벼운 플라스틱 렌즈로 이동하고 있다. 이 광학 부품들의 요구 정밀도는 형상 정밀도, 면 거칠기 모두 요구값이 높아지고 있으며 초정밀 비구면 경면 절삭 기술이 이용되고 있다. 본 고에서는 프로젝션 TV 및 비디오 카메라의 비구면 플라스틱용 금형을 대상으로 무전해 니켈 도금막의 초정밀 경면 절삭 기술에 대해 소개한다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.518-520
• /
• 2011

금속분말 쾌속조형법의 한 종류인 DMLS 공정은 사출성형품의 균일한 냉각이 가능한 3차원 냉각시스템을 포함한 코어, 캐비티 제작이 가능하다. 그러나, 코어 및 캐비티 내 미세형상의 경우 DMLS로 제작하기에는 난해하므로 별도 미세 절삭가공을 통해 제작할 필요가 있다. 따라서, 본 연구에서는 DMLS금형강 소재의 미세 절삭가공 특성을 분석하고자 하였으며, 이를 위하여 HIP 공정 적용 전 후 DMLS금형강 소재를 대상으로 미세 절삭가공 실험을 수행하고 버 발생 및 공구마모 경향을 분석하였다. 실험 결과 HIP 적용 전 시편이 강도 및 조직측면에서 미세 절삭가공에 상대적으로 유리함을 확인할 수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.145-148
• /
• 2001

SiC composites were developed by incorporating glass phase into SiC, in the light of improving mechanical properties of material for spectacle lens cutting. Specimens for spectacle lens cutting with glass phase as sintering additives have been fabricated by hot-pressing at $1810^{\circ}C$ for 2 hr under a pressure of 25 MPa. The fracture toughness and hardness of hot-pressed specimens were characterized and compared with previous works. Typical hardness and fracture toughness of materials for spectacle lens cutting were 12 GPa and $5.1MPa{\cdot}m^{1/2}$ respectively.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.167-172
• /
• 2002

Recent years, optical components'are widely used in optical communication industry for high speed and mass storage data processing. Micro grooving of planar lightwave circuit and glass, those are widely used in optical component, are realized by polycrystalline diamond tool with ultrasonic vibration. To know the characteristics of brittle materials cutting, ultrasonic vibration cutting tool and machining system are built for the experiment. Grooving on planar lightwave circuit and glass experiments are performed and their shape are measured by photograph with microscope. It reveals that better groove shape with low chipping of planar lightwave circuit and glass are obtained by micro grooving machining with ultrasonic vibration. These experiments are considered as a possibility to the micro grooving of optical communication components.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.4
• /
• pp.117-122
• /
• 1998

Glass fiber epoxy composite material is widely used in the structures of aircrafts, robots and other machines because of their high specific strength, high specific stiffness and high damping. In order for the composite materials to be used in the aircraft structures or machine elements, accurate surfaces for bearing mounting or joint must be provided, which require precise machining. In this paper, the machinability of the glass fiber epoxy composite material was experimentally investigated. The results can be summarized as follows : 1. The entrance of hole is very good manufacturing existing, but exit come to occur sever surface exfoliation. 2. The cutting force in drilling of the glass fiber epoxy composite material is decreased as the drilling speed increased. 3. If the glass fiber epoxy composite material is drilling by the standard twist drill, then the hole recommand cutting condition is spindle speed 400∼600rpm, feed 40∼50mm/min.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.15-21
• /
• 2004

Composite materials are widely used to make all kinds of machine parts, internal and structural materials of cars, aerospace industries, building structures, ship materials, sporting goods and others. It is worth the while to use composite materials as various substitutions when compared with others. But the use is limited in the field of the mechanical processing because of its difficulties in processing. Thus, it is proved that the surface is rough in and out of the hole processing the GFRP with HSS drill in the vertical machining center.