• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.2
• /
• pp.27-32
• /
• 2017

Objectives: Oncological hyperthermia is a treatment to selectively kill cancer cells by directly applying heat to cancer cells or indirectly demage cancer cells. One of the most side effects of treatment is burn that can appear on the skin. In areas with irregularities such as the umbilicus, the patient feels a sense of hot and treatment may be discontinued. Therefore, in order to eliminate the irregularities of these areas, compensators are manufactured and measured to decrease in temperature. Materials and Methods: The temperature of the four sites (umbilicus, near the umbilicus, 5 cm below the umbilicus, back) was measured five times around the umbilicus in patients who were treated at oncological hyperthermia treatment device(EHY-2000, Oncotherm Kft, Hungary). The temperature sensor (TM-100, Oncotherm Kft, Hungary) was attached to four sites and the changes were observed at 5, 15, 25, 35, and 50 minutes after treatment. Compensators of three materials were used(Vaseline, Bolus, Dental resin). The data measured five times were compared for each compensator. Results: The temperature change when the compensator was not used increase from 34.65 degrees to 42.9 degrees on average. The near umbilicus was changed from 32.20 degrees to 37.00 degrees, and the 5 cm below the umbilicus was changed from 31.90 to 34.41 degrees. When the compensator material was inserted into the umbilicus, the temperature change was measured as 5.42 degrees for bolus, 6.55 degrees for vaseline, and 6.83 degrees for resin. Conclusion: Using the compensator in the region where the irregularities such as the umbilicus, the heat sensation could be reduced. the use of a resin that can be customized not only lowers the temperature but also significantly reduces the feeling of the patient. It will be possible to reduce the heat sensation in the treatment and to treat it in a more comfortable condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.335-341
• /
• 2013

Kyungokgos purchased in local markets in Korea vary in their combination and mixing ratios during processing. This study was investigated qualities of Kyungokgos manufactured traditionally to evaluating its qualities. The general components of Kyungokgos were moisture (18.62~49.78%), ash (0.198~1.211%), protein (0.89~3.58%), lipid (0.16~1.14%) and carbohydrates (47.95~77.08%). The color values of L, a, and b were 26.49~73.87, 16.51~38.64, and 45.41~88.94, respectively. The viscosity was classified into three non-Newtonian type groups: high, medium, and non-dilatant, according to the increase of loop execution times. Three extracts (KOG-1, -7, and -8, in a 30-fold dilution) showed no cytotoxicity toward RAW 264.7 cells, while the extracts of KOG-2, -4, and -5 showed a low cytotoxic effect. KOG-1 and -2 extracts with low cytotoxicity markedly inhibited the production of the inflammatory mediators-nitric oxide (NO) and tumor necrosis factor-alpha (TNF-${\alpha}$) in LPS-stimulated RAW 264.7 cells. These results indicate that KOG-1 and -2 extracts have anti-inflammatory activity in LPS-stimulated RAW 264.7 macrophages.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.1
• /
• pp.103-109
• /
• 2006

This study was designed to investigate the influence of Eosungcho (Houttuynia cordata Thunb) mixture on the plasma lipids of pigs. Experimental groups were divided into 3 groups: control group(0%), 5% and 10% Eosungcho feeding groups. Plasma concentration of total cholesterol, atherosclerotic index, free cholesterol and cholesteryl ester were significantly lower in the Eosungcho powder 5% and 10% feeding groups than control group. Plasma contents of HDL-cholesterol, cholesteryl ester ratio, triglyceride and phospholipid were significantly different between 10% Eosungcho feeding group and control group. Plasma concentration of LDL-cholesterol was significantly love in 10% Eosungcho feeding group($76.5{\pm}5.4mg/dL$) than in control group($86.5{\pm}5.6mg/dL$). Plasma concentration of VLDL and chylomicron were showed similar tendency to LDL-cholesterol. Also, blood sugar, GOT and GPT concentration were significantly lower in 10% Eosungcho feeding group than in control group. In control group, the ratio of saturated fatty acid to unsaturated fatty acid was 58.1 : 51.9, but in 5% and 10% Eosungcho feeding groups, those were 42.1 : 57.9 and 41.0 : 59.0, respectively. The component of main fatty acid was different between control group and Eosungcho feeding groups. In Eosungcho feeding groups, main unsaturated fatty acids were oleic acid(18:1) and linoleic acid(18:2). From the results, addition of Eosungcho powder might be effective in improving the plasma lipid components in pigs.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.257-267
• /
• 1993

Optimum pasture management during the summer season is an important factor to maintain good regrowth and persistence of pasture. The field experiment was carried out to investigate the effects of cutting management on growth and reserve carbohydrates in stubble. and on dry matter yield of orchardgrass dominated pasture during the mid-summer season. Three different cutting times(July 15, 25 and August 5) as a main plot and three cutting heights(3, 6 and 10cm) as a sub plot were disigned with three replications. The experiment was done at pasture of Changsung Agricultural High School in 1988. The results obtained were summarized as follows: 1. Temperature of soil surface and underground in the cutting of July 15 and July 25 was not showed significantly different, because of low intensity of radiation with a run of wet weather, and that of August 5 cutting tends to be lowed in high cutting height during the mid-summer season. 2. Amount of soil moisture against cutting height showed that high cutting had a low content. 3. Growth rate against regrowth of plant height, lear length and leaf area showed to be fast in high cutting. 4. Rapid recovery period of carbohydrate content after cutting and large amount of carbohydrate accumulation were showed in the cutting of July 15 and 25 compared with August 5 cutting in the reserve carbohydrate content against cutting of time and height during the mid-summer season. 5. Dry matter yield of the 4th and 5th cutting showed to be remarkable in July 15 cutting compared to those of July 25 and August 5. From the above results, it is suggested that the 10cm cutting height during the mid-summer season is the most effective for good regrowth, reserve carbohydrates and dry matter yield of orchardgrass.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.3
• /
• pp.197-210
• /
• 2009

To improve the forage quality and reduce nitrogen input, trial was conducted on the effect of seeding method, combination, and nitrogen fertilizer with WCB (whole crop barley) and leguminous plant. Present experiment was carried out by split-split design having seeding methods for main plot, combinations for sub-plot, and nitrogen fertilizers for sub-sub plot with three replications. When WCB and leguminous plant were mixed-sown, WCB showed earlier heading and maturing than those of inter-sown, and the more nitrogen delayed growth stage a little. Occurrence of BaYMV (Barley Yellow Mosaic Virus), a serious disease caused by soil fungi and decrease barley yield, was deterred by mixed-seeding as compared to inter-sown barley a little. Inter-sown WCB increased the number of spike per $m^2$ as compared to mixed-seeding showing more spikes with nitrogen increase. WCB produced much fresh and dry matter yield at mixed-seeding than inter-seeding, and had advantage with hairy vetch (HV). Increased nitrogen showed much forage yield, however, half application of it is considerable for environmental-friendly farming. Electric conductivity (EC) decreased in inter-cropping or mixed-sowing soil with WCB and leguminous crop after harvest. But, organic matter (OM) content of soil after harvesting was vice versa. Acid detergent fiber (ADF) and Neutral detergent fiber (NDF) of WCB plant were higher at mixed-seeding than those of inter-sown ones. It showed increased tendency with time progress.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.4
• /
• pp.381-391
• /
• 1993

To evaluate the antioxidizing effect of flavonoid on fish oil and peroxidized fish oil, rats were fed with diets containing 5% corn oil (CO), 5% corn oil and 15% fresh fish oil (FO) or peroxidixed fish oil (PFO) for 4weeks. An half of FO and PFO group rats were injected with 10mg flavonoid (+)-catechin (a day per kg body weight) (FO-C and PFO-C). FO and FO-C group rats showed higher increase in body weight as compared to PFO, PFO-C group rats. Whereas, the opposite result was obtained in case of liver weight increase. In addition, catechin apparently reduced liver weight by 12~17%. Phospholipid, cholesterol, triglyceride and lipid peroxide content in serum and cholesterol, lipid peroxide content in liver and adipose tissue of PFO, PFO-C group rats were significantly higher than those of FO, FO-C one. These results suggested that catechin reduced the synthesis of lipid and protected effectively against lipid peroxidation. In fatty acids profile of neutral lipid and phospholipid, the ratio of polyunsaturated fatty acids (PUFA) versus saturated fatty acids (SFA) in PFO, PFO-C were lower than that of FO or FO-C because of ruduced PUFA. Contrary to our expectation, the enzyme activities of superoxide dismutase(SOD), catalase and glutathione peroxidase (GSH-Px) in rat liver of FO and FO-C group were lower than those of PFO and PFO-C group. These results were quite interesting and might be explained in terms of homeostasis. In case of total lipid in liver, $C_{20:5}$, $C_{22:6}$ fatty acids were decreased in rat fed peroxidized fish oil. In conclusion, catechin was considered to be an antioxidative and hepatoprotective drug and hypolipidemic agent.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.397-406
• /
• 2008

Objective: The purpose of this study was to provide clinical guidelines to indicate the best location for mini-implants as it relates to the cortical bone thickness and root proximity. Methods: CT images from 14 men and 14 women were used to evaluate the buccal interradicular cortical bone thickness and root proximity from mesial to the central incisor to the 2nd molar. Cortical bone thickness was measured at 4 different angles including $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$. Results: There was a statistically significant difference in cortical bone thickness between the second premolar/first permanent molar site, central incisor/central incisor site, between the first/second permanent molar site and in the anterior region. A statistically significant difference in cortical bone thickness was also found when the angulation of placement was increased except for the 2 mm level from the alveolar crest. Interradicular spaces at the 1st/2nd premolar, 2nd premolar/1st permanent molar and 1st/2nd permanent molar sites are considered to be wide enough for mini-implant placement without root damage. Conclusions: Given the limits of this study, mini-implants for orthodontic anchorage may be well placed at the 4 and 6 mm level from the alveolar crest in the posterior region with a $30^{\circ}$ and $45^{\circ}$ angulation upon placement.

• Journal of Aquaculture
• /
• v.6 no.3
• /
• pp.133-146
• /
• 1993

Monthly variation of fatness index of the shortnecked clam was investigated at Moonhangri in Namhaedo of the southern coast of Korea from April 1991 to March 1992. The standing crops of umbo stage larvae and spats of this bivalve were also investigated. The results are as follows: The ranges of a monthly average water temperature and salinity were $6.9\~23.5^{\circ}C$ and $29.6\~33.1%o$ during the investigation period. Fatness index of the shortnecked clam decreased suddenly from June to September, which seemed to be spawning season. The umbo stage larvae of the clam were observed from May to November. The standing crops of the larvae were $883\;inds./m^3$ in August and$68\;inds./m^3$ in November. The observed number per ~ of the spats varied with the month and the different exposure time zones. The highest density $(1,508\;inds./m^3)$ was observed 1 hour exposure zone in August, and the lowest one $(28 inds./m^3)$ at 1 hour exposure station in April. Even the observed number of the spats below 4 mm in shell length were high in 1 and 3 hour exposure zones, the spats above 4 mm in shell length were observed mainly at 3 hour exposure zone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.15-24
• /
• 2003

The purpose of this study is to investigate the sterilization effect of Er:YAG laser against the intraoral acid producing bacterium, S. mutans, by irradiating the culture solution containing S. mutans KCTC 3065 with Er:YAG laser having a $650{\mu}m$ diameter beam through the non-contact method. We obtained the following results after examining the temperature changes of the culture solution, numbers of bacterial colonies, and acid-producing ability and attaching ability on teeth by measuring the amount of extracellular polysaccharide produced by S. mutans. The number of bacterial colony was decreased in $10{\mu}l$ culture solution irradiated with laser in overall compared to the control solution. The number decreased as the irradiation intensity and pulse repetition rate were larger and as the exposure time was increased. However, it did not change significantly in $100{\mu}l$ culture solution compared to the control solution. Although the acid-producing ability of S. mutans was inhibited for a certain duration after laser irradiation in 10r1 bacterial culture solution, it did not change in $100{\mu}m$ solution compared with the control solution. The amount of extracellular polysaccharide synthesized by S. mutans was partially decreased through laser irradiation in $10{\mu}m$ culture solution but did not change in $100{\mu}m$ culture solution. Based on these findings, we concluded that Er:YAG laser has an sterilization effect on S. mutans in which we presume that the mechanism is through the heat effect rather than the mechanical effect from development of ultrasound.

• Science of Emotion and Sensibility
• /
• v.7 no.1
• /
• pp.65-81
• /
• 2004

With the arrival of the 21th century, the management environments such as the knowledge system, information system, and technology system surrounding small and medium enterprises are being rapidly changed. These rapidly changing the environment of enterprises like the above can be thought rather profitable for the elastic and resiling medium enterprises than large enterprises. Additionally, these environments are recognized as the management circumstances which provide with the change by which medium enterprises equipped with the trustworthy creativity in the 21th century are able to become the main player of the industrial development. The position and role of medium enterprises in the national economical system are very important. The execution of the local autonomy system and the policy to activate the local economy will generally enlarge the power of medium enterprises which are based on the concerned local society more ant more. But, by the standpoint of designer, it is pointed out that there is the problem that the effective application means or the availability of the industrial design was not sufficiently recognized or understood by the manager in enterprises. Notwithstanding the above problem, a lot of domestic small and medium enterprises became to apply the industrial design as the means for improving the competitiveness of their own products in the relatively short time powered by the governmental policy, and moreover both of the concerned partners(the manager and industrial designer) had the opportunity to newly recognize the industrial design and evaluate the availability or problem of the industrial design in the actual aspect. This event means very important change. With the understanding on the above situation, the purpose of this study is to recognize whether the design is strategically applied in the management level of domestic small and medium enterprises, whether the strategical establishment of the design management is performed without any problem, whether the field designer and CEO are well recognizing the design management and what their recognition level is in order to seek the new solution for plenty of problems. Therefore, the actual proof analysis was performed for the field designer and management CEO of small and medium enterprises with the questionnaire survey and direct interview method to understand the actuality of small and medium enterprises.