• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1235-1242
• /
• 2006

Viscoelastic damping materials are widely used to reduce noise and vibration because of its low cost and easy implementation, for examples, on the body structure of passenger cars, air planes, electric appliances and ships. To design the damped structures, the material property such as elastic modulus and loss factor is essential information. The four-parameter fractional derivative model well describes the nonlinear dynamic characteristics of the viscoelastic damping materials with respect to both frequency and temperature with fewer parameters than conventional spring-dashpot models. However the identification procedure of the four-parameter is very time-consuming one. An efficient identification procedure of the four-parameters is proposed by using an FE model and a gradient-based numerical search algorithm. The identification procedure goes two sequential steps to make measured FRFs coincident with simulated FRFs: the first one is a peak alignment step and the second one is an amplitude adjustment. A numerical example shows that the proposed method is efficient and robust in identifying the viscoelastic material parameters of fractional derivative model.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.656-661
• /
• 2005

An optimization formulation of unconstrained damping treatment on beams is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. The loss factors of partially covered unconstrained beam are calculated by the modal strain energy method. Vibration responses are calculated by using the modal superposition method, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in minimizing vibration responses with unconstrained damping layer treatment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.829-835
• /
• 2005

An optimization formulation of unconstrained damping treatment on beam is proposed to minimize vibration responses using a numerical search method. The fractional derivative model is combined with RUK's equivalent stiffness approach in order to represent nonlinearity of complex modulus of damping materials with frequency and temperature. Vibration responses are calculated by using the modal superposition principle, and of which design sensitivity formula with respect to damping layout is derived analytically. Plugging the sensitivity formula into optimization software, we can determine optimally damping treatment region that gives minimum forced response under a given boundary condition. A numerical example shows that the proposed method is very effective in suppressing nitration responses by means of unconstrained damping layer treatment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.12
• /
• pp.938-946
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximizeloss factor using a numerical search method. The fractional derivative model can describe damping characteristics of viscoelastic damping materials accurately, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kelvin[RUK] equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are identified with ambient temperatures and thickness ratios of beam and damping layer by using a finite-difference-based steepest descent method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.665-671
• /
• 2003

Length of an unconstrained viscoelastic damping layer on beams is determined to maximize loss factor using a numerical search method. The fractional derivative model can describe damping characteristics of the viscoelastic damping material, and is used to represent nonlinearity of complex modulus with frequencies and temperatures. Equivalent flexural rigidity of the unconstrained beam is obtained using Ross, Ungar, Kerwin(RUK) equation. The loss factors of partially covered unconstrained beam are calculated by a modal strain energy method. Optimal lengths of the unconstrained viscoelastic damping layer of beams are obtained with respect to ambient temperatures and thickness ratios of beam and damping layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.634-642
• /
• 1993

In this paper a new trajectory control method is proposed for a robot manipulator using a time delay neural network(TDNN) as a feedforward controller with an algorithm to learn inverse dynamics of the manipulator. The TDNN structure has so favorable characteristics that neurons can extract more dynamic information from both present and past input signals and perform more efficient learning. The TDNN neural network receives two normalized inputs, one of which is the reference trajectory signal and the other of which is the error signals from the PD controller. It is proved that the normalized inputs to the TDNN neural network can enhance the learning efficiency of the neural network. The proposed scheme was investigated for the planar robot manipulator with two joints by computer simulation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.4
• /
• pp.90-100
• /
• 2003

본 연구는 기존 건축물 옥상녹화에 이용 가능한 저토심 옥상녹화 시스템 을 연구하고 개발하고자 수행되었다. 연구목적을 달성하기위해서 시스템의 개념적 모델이 선행 연구로부터 유추되었고 개념적 모델로부터 실험을 위한 시스템들이 제안되었다. 건축물 옥상 위에 설치된 이 시스템들에서 기린초의 생육에 대하여 인공배지 종류, 토심, 그리고 배수 형태의 효과들이 2002년 4월 3일부터 10월 18일까지 연구되었다. 인공배지 종류는 단용과 혼용이고, 토심은 5cm, l0cm,그리고 15cm이며, 배수 형태는 저수$.$배수형과 배수형으로 하였다. 여기서, 인공배지 단용은 폐유리 미분 100에 발포제를 1∼2정도 첨가하고, 착색제를 1정도 첨가한 후, 6∼8$^{\circ}C$/min로 승온하여 750∼85$0^{\circ}C$의 온도에서 발포시킨 다공질 유리를 수냉식으로 급랭하고, 분쇄기로 이송하여 l0mm이하로 분쇄하고 입도를 조절하여 얻어진 다공질 유리 파쇄물과 수피를 부피 비 6:4로 혼합하여 조성된 것이며 인공배지 혼용은 인공배 지 단용에 양토(모래 46%, 미사 40%, 점토 14%)를 부피비 5:5로 혼합하여 조성된 것이다. 피복면적, 지상부와 지하부의 생체중과 건물중, 그리고 시각적 질을 조사하였다. 각 변수들은 던칸의 다중범위 검정으로 통계처리 하였으며 처리들간의 유의수준은 5%였다. 그리고 기존 건축물 옥상에 대한 과부하의 위험을 피하기 위해서 각 시스템의 중량이 평가되었다. 그 결과를 요약하면 다음과 같다. 실험기간 중에 피복면적에 대한 배수 형태의 효과는 유의성 있는 차이를 나타내지 않았다. 인공배지 혼용의 피복면적은 인공배지 단용의 것보다 통계적으로 유의성 있게 높았다. 토심 5cm처리의 피복면적은 나머지 처리들의 피복면적보다 통계적으로 유의성 있게 낮았다. 토심 l0cm처리와 토심 15cm처리는 통계적으로 유의성이 없는 것으로 나타났다. 지상부와 뿌리의 생체중 및 건물중과 시각적 질에 대한 처리들의 효과는 피복면적에 대한 것과 유사하거나 동일하였다. 결과적으로, 기린초의 생육은 인공배지 단용보다 인공배지 혼용에서 더 높았고, 토심 10∼15cm에서 더 높았으며, 배수 형태에서는 뚜렷한 차이를 나타내지 않았다. 이 결과를 토대로, 기존 건축물 옥상에 적용 가능한 시스템의 허용하중과 기린초의 생육을 동시에 고려해볼 때, 저토심 옥상녹화 시스템 은 인공배지 종류에서는 혼용이, 토심은 10cm, 그리고 배수형태는 배수형이 적합하다고 보았다. 제안된 조건으로 조성된 시스템은 인공배지가 포장용수량상태일 때 그 중량이 약 115kg/$m^2$정도로 나타났다.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.157-165
• /
• 2000

Purpose: For estimation of yields of l)NA damages induced by radiation and enhanced by oxygen, a mathematical model was used and tested. Materials and Methods: Reactions of the products of water radiolysis were modeled as an ordinary time dependant equations. These reactions include formation of radicals, DNA damage, damage repair, restitution, and damage fixation by oxygen and H-radical. Several rate constants were obtained from literature while others were calculated by fitting an experimental data. Sensitivity studies were performed changing the chemical rate constant at a constant oxygen number density and varying the oxygen concentration. The effects of oxygen concentration as well as the damage fixation mechanism by oxygen were investigated. Oxygen enhancement ratio(OER) was calculated to compare the simulated data with experimental data. Results: Sensitivity studies with oxygen showed that DNA survival was a function of both oxygen concentration and the magnitude of chemical rate constants. There were no change in survival fraction as a function of dose while the oxygen concentration change from 0 to 1.0 x 10$^{7}$ . When the oxygen concentration change from 1.0 $\times$ 107 to 1.0 $\times$ 101o, there was significant decrease in cell survival. The OER values obtained from the simulation study were 2.32 at 10% cell survival level and 1.9 at 45% cell survival level. Conclusion: Sensitivity studies with oxygen demonstrated that the experimental data were reproduced with the effects being enhanced for the cases where the oxygen rate constants are largest and the oxygen concentration is increased. OER values obtained from the simulation study showed good agreement for a low level of cell survival. This indicated that the use of the semi-empirical model could predict the effect of oxygen in cell killing.