• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.299-304
• /
• 1996

This paper studies the rational approximation of multiple input delay systems using the Hankel singular values and vectors, which are the soultion of a transcendental equation. Rational approximatants are obtained from output normal realizations which are constructed by the Hankel singular values and vectors. Consequently, it is shown that rational approximants by output normal realization preserve intrinsic properties of time delay systems than Pade approximants.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.194-204
• /
• 1997

In this paper, we consider the rational approximation of multiple input delay systems. The method of computing Hankel singular values and vectors is firstly introduced, where explicitly shows the structure of the corresponding Hankel singular vectors. Secondly, rational approximants are obtained from output nor- mal relizations, which are constructed by Hankel singular values and vectors. As a result, it is shown that rational approximants by output normal realization preserve intrinsic properties of time delay systems than Pad'e approximants.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.335-336
• /
• 2011

홀로그램은 레이저 빔의 간섭을 이용하여 입체영상을 광학적으로 기록하는 방법으로 동영상의 기록 및 재생에는 여러 제약 조건이 따른다. 때문에 광학적 방법으로는 홀로그램 TV 시스템을 구현하기 힘들다. 이런 단점을 극복하기 위해 컴퓨터를 이용해 홀로그램을 구현할 수 있다. 즉, 광학적인 신호들을 근사화한 후 컴퓨터에서 수학적인 연산을 거쳐 간섭 무늬를 계산하는 Computer generated hologram(CGH) 방법을 사용하여 패턴을 생성한다. 하지만 CGH 기법의 경우 상당한 연산을 필요로 하기 때문에 연산을 최적화하여 홀로그램 생성에 걸리는 시간과 비용을 최소화하려는 연구들이 많이 진행되고 있다. 본 논문에서는 이전에 연구된 CGH 고속 연산을 위한 알고리즘을 정리하며 연산 식의 최적화를 통해 연산을 횟수를 줄이는 방법과 look-up table 을 이용한 방식의 연산량과 하드웨어 비용을 계산하여 multi-processor 에 적용 시 어떤 알고리즘이 유리할지 제안한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.103-103
• /
• 2021

실험실에서의 파랑생성에 흔히 사용되는 피스톤형 조파장치는 수심에 따라 유속이 동일하게 생성된다는 제약이 있어 주로 천해파의 생성에 적합한 것으로 알려져 있다. 본 연구에서는 이러한 제약조건 없이 다양한 유속분포의 파형을 생성하는 수직 다열화된 조파장치가 개발되었다. 우선, 수심방향으로 이산화된 각 패들(paddle)의 스트로크에 대해 선형해석해가 유도되었다. 개발된 해석해는 패들의 수 및 유속분포에 따라 기존의 피스톤형 혹은 플랩형 조파장치 해석해로 근사함이 밝혀짐으로써 포괄적으로 활용될 수 있음이 확인되었다. 즉 개발된 해석해를 활용하면 선택적으로 피스톤형 및 플랩형 조파성능이 구현될 수 있다. 더불어 개발된 해석해는 다상유체의 내부파 생성에도 확정되어 적용가능함이 확인되었다. 다음으로, 개발된 조파장치를 수치적으로 구현하였다. 오픈소스 3차원 수치모형인 OpenFOAM 중, 두 개 이상의 불연속 및 비압축 유체에 대한 Navier-Stokes 방정식을 해결하는 수치 모듈을 사용하여 제안된 수직다열화된 조파장치의 성능이 평가되었다. 이때 동적격자모델(olaDyMFlow)을 결합함으로써 개발된 조파장치 움직임이 물리적 조파장치와 흡사하도록 수치적으로 구현하였다. 모의결과, 여러 개의 다열화된 패들이 층류 흐름 조건에서 심해파를 효율적으로 생성시키고, 중간수심 파랑조건에서는 제안된 조파장치가 상대적으로 덜 유리함을 확인할 수 있었다. 마지막으로 공기, 기름 및 물 등 3상의 흐름조건에서 단 두 개의 패들을 활용하여 각각 내부파 및 표면파를 생성하되었으며, 모의 결과는 해석해과 비교됨으로써 개발된 조파장치의 성능이 검증되었다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.38-45
• /
• 1998

A new set of MQW LD rate equations is proposed that include the interwell carrier transport effect assuming it is dominated by holes. Solving the rate equations, the DC transient response of MQW was obtained and it was shown that uneven carrier concentrations exist due to the interwell carrier transport effect. In addition, it was found that the large number of quantum wells can limit the LD modulation speed and InGaAlAs barriers with smaller valence band offsets can have larger modulation speeds. It is expected that the proposed rate equations can find useful applications in designing the optimal MQW LD structures for high speed applications.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.93-101
• /
• 2007

To jointly optimize the spatial registration and the exposure compensation, an iterative registration algorithm, the Lucas-Kanade algorithm, is combined with an exposure compensation algorithm, which is based on the histogram transformation function. Based on a simple regression model, a nonparametric estimator, the empirical conditional mean, and its polynomial fitting are used as histogram transformation functions for the exposure compensation. Since the proposed algorithm is composed of separable optimization phases, the proposed algorithm is more advantageous than the joint approaches of Mann and Candocia in the aspect of implementation flexibility. The proposed algorithm performs a better registration for real images than the case of registration that does not consider the exposure difference.

• The Korean Journal of Quaternary Research
• /
• v.13 no.1
• /
• pp.35-43
• /
• 1999

Goryeri archaeological site is located in the upstream valley of the Danjang River. The basement rocks of the area are composed of the Cretaceous to Palaeogene biotite granite (KbGr), acidic dyke (Kad), Milyang Andesite (Kma) and Jyunggagsan Formation. Among them Milyang Andesite and Jyunggagsan Formation are prevailed in archaeological site and they are composed of reddish brown tuffaceous shale, sandstone and conglomerate, with intercalations of acidic tuffs and lapilli tuffs. The purpose of this research is not only to compare REE pattern of the soil-sedimentary deposits with those of surrounding rocks, but also to identify vitric tephra in the soil-sedimentary deposits derived from the andesite, acidic tuff and lapilii tuff, in order to illucidate the provenance of the vitric tephra. The rare earth element(REE) of the soils and sedimentary deposits results in the same REE pattern with those analyzed from the surrounding basement rocks. This indicates that the soils and sedimentary deposits are originated from the surrounding basement rocks, most probably from the andesite and lapilli tuff. In addition, vitric tephra were identified both in the Quaternary in-situ weathered soils and sedimentary deposits (PMU-13 and PMU-17), and in the weathered surrounding lapilli tuff. These vitric tephra are considered to be different from those of Japanese AT(Aira Tanzawa) -tephra. The latter is predominant with clean, platty, bubble-walled and Y-shaped vitrics, while the former is conspicuous with those shapes of large and diverse size and devitrified, as well as having secondarily bubbled-surfaces reflecting surface weathering. The size of vitric fragments in the Goryeri site is about 300${\mu}{\textrm}{m}$ and large in size in compasion to 150${\mu}{\textrm}{m}$ of Japanese AT-Tephra. The interim results of the research are contradictary to the explanations based on a series of AT-tephra researches carried by Japanese scholar. In short, the vitric materials of the Goryeri archaeological site are most probably originated from the weathering products of the surrounding basement rocks, and are different from the AT-tephra in their size, shape and devitrification properties. Thus it is highly recommended to have a further comprehensive research which is more emphasized the magmatic genesis of these vitric tephra in addition to the external shape and morphology.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.6-17
• /
• 2013

Multicomponent seismic data including both P- and PS-waves have advantages in discriminating the type of pore fluid, characterizing the lithologic attributes and producing the high resolution image. However, multicomponent seismic data recorded at the vertical and horizontal component receivers contain both P- and PS-waves which have different features, simultaneously. Therefore, the wavefield separation of P- and PS-waves as a preprocessing is inevitable in order to use the multicomponent seismic data successfully. In this study, we analyzed the previous study of the wavefield separation method suggested by Jeong and Byun in 2011, where the approximated reflection angle calculated only from one refernce depth is used in rotation transform, and showed its limitation for seismic data containing various reflected events from the multi-layered structure. In order to overcome its limitation, we suggested a new effective wavefield separation method of P- and PS-waves. In new method, we calculate the reflection angles with various reference depths and apply rotation transforms to the data with those reflection angles. Then we stack all results to obtain the final separated data. To verify our new method, we applied it to the synthetic data sets from a multi-layered model, a fault model, and the Marmousi-2 model. The results showed that the proposed method separated successfully P- and PS-reflection events from the multicomponent data from mild dipping layered model as long as the dip is not too steep.

• Nuclear Engineering and Technology
• /
• v.9 no.4
• /
• pp.211-222
• /
• 1977

The decomposition of all the individual chemicals used in the Harwell inactive vitrification pilot plant has been studied by means of a thermal balance. Weight loss curves to 110$0^{\circ}C$ have been obtained. The four materials (sodium nitrate, cesium nitrate, lithium nitrate and ruthenium nitroso-nitrate solution) showed a greater weight loss than that based on an oxide yield, and hence these compounds of their products of decomposition are volatile below 110$0^{\circ}C$. The remaining materials suffered a weight loss no more than that corresponding to a full yield of the oxide, and hence they were not volatile below 110$0^{\circ}C$. Most of chemicals begin to decompose at less than 75$^{\circ}C$ but the nitrates of cesium, strontium, barium and sodium not until 295$^{\circ}C$ to 59$0^{\circ}C$. The results obtained can be used in the analysis of process conditions in the vitrification and calcination of highly radioactive wastes and also of the thermal decomposition behaviour of mixtures containing those materials.