• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.231-231
• /
• 2011

바늘침 전극을 사용한 대기압 플라즈마 제트의 전기적 특성을 조사하였다. 접지 전극 위치, 안정 커패시터 크기 등 변수에 따라서 플라즈마 제트 방전 특성의 변화를 조사한다. 각 실험조건의 등가회로를 통해서, 플라즈마 방전 특성(IV-curve)을 분석한다. 등가회로에서 안정 커패시터 Cp, 유리관 내부 플라즈마 저항 RP, 접지측 유리층 커패시턴스 CG, 대기 접지 RA, 등의 각 변수들을 검토한다. Rp 및 Rj는 방전이 강해질수록 작아진다. 특히 타운젠트 방전 후 Rp 및 Rj는 약 수십 $k{\Omega}$으로 작아진다, 회로 전체 임피던스와 비교하면 아주 작은 값이다. 안정 커패시터 와 접지 측 유리 층의 임피던스는 수백 $k{\Omega}$으로 아주 크다. 방전이 진행되면서 플라즈마 저항 Rp 및 Rj가 급감하여도 Cp 및 CG의 역할로 회로전체 임피던스가 일정한 값을 유지할 수 있어서 전류가 급증 하는 것을 방지할 수 있다. 대기 접지 RA는 $M{\Omega}$으로, 접지 전극이 없을 때 방전 개시전압도 높아진다.

• Convergence Security Journal
• /
• v.14 no.3_1
• /
• pp.3-9
• /
• 2014

NCOs of the amy-navy-air force are the foundation in maintaining, developing and leading the army making manpower aquisition very important. Currently, the operation or the recruitment business is being overlapped by each training institutions leading to uneffectively decreasing the curiosities of the applicants regarding their future. Even though the NCO selection policy is strong in the aspect of retaining uniqueness, use of acquired specialist, and statute revision, it is showing insufficiency in publicizing, selection effectiveness, promotion of peoples' conveniency, and budget reduction. Therefore, if the unification regarding the recruitment of each military sectors are run by the MMA(Military Manpower Administration), which is the institute that is fully responsible for the recruitment duty, it can acquire excellent man power while decreasing effort and resources, provide accurate information to the NCO applicants on time, and provide improved services through the convenient facilities and systems.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1460-1461
• /
• 2008

마이크로칩 형태에서의 모세관 전기영동과 전류법을 이용하여 디옥시리보핵산(DNA) 단편들의 분리 검출하는 실험을 하였다. 마이크로 채널이 형성된 PDMS(polydimethylsiloxane)와 금 전극이 형성된 유리 기판을 접합하여 마이크로칩을 제작하였다. 20V/cm의 전계를 인가하여 100bp-1.5kbp 길이의 DNA 단편을 모세관 전기영동 하였을 때 250초내에 분리 검출되는 것을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.515-519
• /
• 2002

자동차 및 유체기계의 흡기계나 배기계에 사용되는 소음기의 음향성능은 전달손실로 기계성능은 배압으로 표현된다. 유체가 흐르는 관 사이의 임피던스 부정합을 이용하는 반사형 소음기의 경우, 내부 유로에 천공을 주어 음향감쇠를 시키거나 유동을 안정시키는 경우가 많다. 본 연구에서는 동심관형 공명기의 내부 관에 존재하는 천공의 분포 양상이 소음기의 전달손실과 배압에 미치는 영향을 실험을 통하여 고찰하였다. 내부관의 평균 천공율은 일정하지만 길이 방향을 따라서 천공율이 변하는 다섯가지의 공명기에 대한 실험을 수행하고, 성능에 미치는 영향을 살펴보았다. 전달손실은 천공요소의 임피던스 모델을 고려하여 예측한 결과와 비교하였고, 측정된 배압은 모의 해석 결과와 비교하였다. 분석 결과, 천공율이 점점 작아지는 분포나, 작았다가 커진후 다시 작아지는 형태의 분포를 가질 경우, 배압 측면에서 매우 유리하고, 음향 전달손실도 큰 차이가 없음을 밝혔다.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.1
• /
• pp.33-40
• /
• 2014

In general, pipes buried underground can be classified into either rigid or flexible pipe. Glass fiber reinforced thermosetting polymer plastic (GFRP) pipe can be considered as one of typical flexible pipes for which the soil-pipe structure interaction must be taked into account in the design. In this paper, we present the result of an investigation pertaining to the short-term and long-term behavior of buried GFRP pipe. The mechanical properties of the GFRP pipe produced in the domestic manufacturer are determined and the results are reported in this paper. In addition, Ring deflection is measured by the field tests and the finite element analysis. Also, the extrapolation using these techniques typically extends the trend from data gathered over a period of approximately 5,232 hours, to a prediction of the property at 50 years, which is the typical maximum extrapolation time. Therefore, it was investigated that the long-term ring deflection of GFRP pipe estimated by methods for Monod-type.

• Journal of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.81-84
• /
• 1967

A simple rotating micro mercury electrode is constructed in such a way that the mercury surface can be renewed quite easily with reasonable reproducibility. It consists of a glass capillary of about 1mm diameter connected to a mercury filled tube by means of a ground joint that allows mercury flow at a particular relative position only, and the electrical connection between the two parts is made by a platinum wire fused in the bottom of the latter. Thus the mercury surface exposed at the tip of the capillary replaces the platinum tip of the usual platinum micro electrode; however, the capillary has to be bent so that the tip directs upwards. It has been found to be a convenient electrode in the amperometric titration in strongly acidic media. Furthermore, it has been advantageously used in the alternating-current polarography because of its smaller electrical resistance than the ordinary dropping mercury electrodes. It also can be used as a stationary mercury electrode in fast scanning polarography.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.4
• /
• pp.267-291
• /
• 2010

Life can be kept in suspended animation either before fertilization at oocyte stage or after fertilization at different stages of embryonic development for a variety of reasons. It not only has potential applications in fertility preservation and management in human but also has important roles in the preservation and management of animal genetic resources, low-cost international movement of selected genetics, and rapid dissemination of germplasm through assisted reproductive technologies (ART) and genetic engineering. Currently, slow-freezing and vitrification are the two approaches by which oocytes and embryos can be cryopreserved for long-term storage. Both of these methods have their own advantages and disadvantages but allow the cryopreservation of oocytes and embryos with comparable efficiency. Vitrification of oocyte and embryos, although proven successful just 13 years after slow-freezing, is generally considered an emerging technology and appears to slow gain acceptance in both animal and human ART despite having controversial storage and contamination issues. In this manuscript, we discuss the basic techniques of oocyt/embryo cryopreservation and review the current status and recent developments in vitrification.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2013

The rare earth oxide wastes consisting of major 8 nuclides Y, La, Ce, Pr, Nd, Sm, Eu and Gd, are generated during the salt waste treatment of PyroGreen process. The final form of the rare earth is generated as the oxide state. In this study, six candidate glasses were developed to evaluate the feasibility for vitrifying the rare earth oxide wastes within the borosilicate glass system. The solubilities of the mixture of the rare earth oxide waste showed less than 25wt% at $1,200^{\circ}C$, less than 30wt% at $1,300^{\circ}C$, respectively. It means that solubility is increased with the temperature increment. The liquidus temperature of the homogeneous glass with 20wt% waste loading was determined as less than $950^{\circ}C$. In more than solubility of rare earth oxides glass, formation of rare earth-oxide-silicate crystal in glass-ceramic occurred as the secondary phase. As their viscosity at melting temperature $1,200{\sim}1,300^{\circ}C$ was less than 100 poise, electrical conductivity was higher than 1 S/cm, 20~25wt% waste loading glasses with good surface homogeneity are judged to have good operability in cold crucible induction melter. Other physicochemical properties of the developed glasses are going to be experimented in the future.

• Analytical Science and Technology
• /
• v.29 no.3
• /
• pp.136-141
• /
• 2016

In the present study, the distribution of glass particles inside 10 patrol cars of Chungnam Province has been studied. The target seats were front seats (driver’s seat, passenger’s seat) and the back seat. The target areas were the bottom of the seat (seat contacting buttocks, back of the seat, and the corner of the seat (the bottom and back attached part)). The target areas were tape lifted with an adhesive tape. The glass particles adhering to the adhesive tape were examined and counted under a stereomicroscope. The total number of glass particles found was 679. Among them, 471 (driver’s seat 293, passenger seat 178) were collected from front seats, which are usually occupied by police officers. The majority of glass particles were under 0.49 mm size. The results show that the majority of glass particles can be found on the front seats, rather than on the back seat. There is a high probability that glass particles found on the front seat adhere to police officers, so that to get further transferred to the convict upon physical contact (secondary transfer). Thus, there is a risk of misinterpretation of the value of glass evidence in the course of forensic examinations. Hence, a separate method to prevent cross contamination has to be prepared by police authorities as soon as possible.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1294-1303
• /
• 1993

The fully developed turbulent momentum and heat transfer induced by the square-ribed roughness elements on the inner wall surface in concentric annuli is studied analytically based on a modified turbulence model. The analytical results of the fluid flow is verified by experiment. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, fluid Reynolds number and for heat transfer, fluid Prandtl number. The study demonstrates that certain artificial roughness elements may be used to enhance heat transfer rates with advantages from the overall efficiency point of view.