• Composites Research
• /
• v.34 no.4
• /
• pp.233-240
• /
• 2021

VaRI(Vacuum assisted Resin Infusion) process, which is cost effective and suitable for manufacturing large-sized composites, is an OoA(Out-of Autoclave) process. For rapid resin infusion in the VaRI process, a DM(distribution media) is placed on top of the fabric. The resin is rapidly supplied in plane direction of the fiber along the DM, and then the supplied resin is impregnated in the out-of-plane direction of fiber. It is difficult to predict the flow of resin because the flow of in-plane direction and the out-of-plane direction occur together, and a 3D numerical analysis program is used to simulate the resin infusion process. However, in order to analyze in 3D, many elements are required in the out-of-plane direction of fabric. And the product size is larger, the longer the analysis time needs. Therefore, in this study, a method was suggested to reduce the time required for flow analysis by simplifying the 3D flow analysis to 2D flow analysis. The usefulness was verified by comparing the 3D flow analysis with the simplified 2D flow analysis at the same conditions. The filling time error was about 7% and the reduction of flow analysis time was about 95%. In addition, by utilizing the constant difference in the flow front between the top, middle, and bottom of the fabric of the 3D analysis, the flow front of the top, middle, and bottom of the fabric can be also predicted in the 2D flow analysis.

• Tribology and Lubricants
• /
• v.26 no.3
• /
• pp.175-183
• /
• 2010

It is not too much to say that, at the beginning of engine development, the most important areas for a good engine concept design is the lubrication system design. So, between right after finishing concept design and before procuring the engine, it is necessary to carry out the system lubrication analysis for the initially designed lubrication system and the related lubricating parts. Therefore, in this paper, it is to describe the results of a design review carried out the numerical net work analysis on the engine bearings and the lubrication system of an initially designed 2.0 L DOHC engine.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.28-33
• /
• 2023

In this study, computational fluid dynamics was used to analyze the flow bias generated as air supplied by a fan passes through ducts, piping, and a coal separation screen. The flow bias of the air flow is mostly caused by the spatial characteristics of the fan volute and duct, and the internal baffle and the coal separation screen at the outlet cause strong pressure losses that dampen the flow bias. ANSYS CFX was used for computational fluid dynamics, and since the baffle and the coal separation screen are shaped like perforated plates with many small holes uniformly distributed, actual modeling for analysis was not possible. Therefore, the Porous Loss Model was applied. The evaluation of the flow bias was analyzed based on the velocity distribution of the Porous Loss Model at the outlet surface of the coal separation screen obtained from the computational fluid dynamics results.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2004.11a
• /
• pp.50-53
• /
• 2004

하천 분기특성을 이용한 유출해석모형에서 최소하천의 크기는 매우 민감한 영향을 미치게 되므로 본 연구에서는 금호강 중류의 금호수위표지점 상류 유역을 대상으로 하여 DEM 격자크기와 최소차 하천의 임계면적에 따른 지형매개변수의 변화특성을 검토하였다. 분석에서는 유역내의 1:25,000 수치지형도를 $10\times10,\;30\times30,\;50\times50m$ 격자망으로 구성하여 하천차수별 개수, 유로연장, 면적, 만곡도, 배수밀도 및 유로연장 등을 대상으로 하였다.

• Journal of the KSME
• /
• v.32 no.11
• /
• pp.947-954
• /
• 1992

이 글에서는 엔진 윤활 시스템해석 프로그램의 구성 요인 및 프로우차트를 열거했으며 이렇게 만들어진 프로그램을 이용하여 엔진의 개선 및 신엔진 개발 시에 매개변수를 변화시켜가며 오일 유로의 설계와 요구되는 오일량을 결정하여 최적의 윤활시스템을 설계할 수 있다고 본다. 참고로 밸브시스템의 정상적인 작동을 유지하는 상태에서 요구되는 토출 유압과 유량이 줄어들면 오일 펌프의 용량을 줄일 수 있고 그로 인해 오일 펌프 구동손실도 줄일 수 있다. 또한 최적 유량이 공급될 때 엔진 구동손실을 최소화할 수 있다. 더나아가 본 해석으로 얻은 최적화된 유량이 만족 된 이상적인 윤활 부위의 치수가 결정된 상태에서 운동부의 마찰을 최소화하는 엔진 마찰의 수치해석적 모델을 개발하는 것도 흥미있는 과제이다. 또한 간단한 테스트 리그 제작에 의한 각 윤활 부품에서의 압력-유량 관계 실험식의 정확도를 높이는 것도 앞으로의 과제이다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.8
• /
• pp.573-578
• /
• 2010

Topological matrix which reflects characteristics of network connectivity has been widely used in efficient solving for complicated flow network. Using topological matrix, one can easily define continuity at each node of flow network and make algorithm to automatically generate continuity equation of matrix form. In order to analyze flow network completely it is required to satisfy energy conservation in closed loops of flow network. Fundamental cycle retrieving algorithm based on graph theory automatically constructs energy conservation equation in closed loops. However, it is often accompanied by NP-complete problem. In addition, it always needs fundamental cycle retrieving procedure for every structural change of flow network. This paper proposes alternative mathematical method to analyze flow network without fundamental cycle retrieving algorithm. Consequently, the new mathematical method is expected to reduce solving time and prevent error occurrence by means of simplifying flow network analysis procedure.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.837-841
• /
• 2001

Almost all power plant boiler has temperature distribution nonuniformity problem in heat transfer tube flow path. It can cause hot spot damage of superheated or reheated heat transfer section and reduce maintenance schedule when nonuniformity is severe. There are two solutions for improvement temperature nonuniformity. one is change of gas flow distribution of gas path and the other is contorl steam flow in tube bank. Of course, first method is very difficulty to apply but second method is'nt. In this paper, control steam flow is used to solve temperature nonuniformity of power plant boiler.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.172-172
• /
• 2004

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.40-42
• /
• 2008

FPD용 마더글라스의 크기가 급격히 증가함에 따라 새로운 이송방식이 요구되어 유로망 해석을 통해 마더글라스의 무게에 맞는 양력을 발생시킬 수 있는 공기부상 이송시스템을 구성한다. 또한 마더글라스의 처짐량을 계산하여 최적화 된 FPD공기부상 이송시스템을 설계한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.35-40
• /
• 2007

The gaseous fuel injection (GFI) type in LPG fuel supply system has more advantage than the liquified fuel injection type from the viewpoint of durability and cost reduction. But in GFI system, to control pressure and temperature of gaseous fuel is needed to get precision fuel metering for the compressible characteristic of gaseous fuel. In this study, the effects of pressure and temperature on the fuel metering was simulated by commercial flow network analysis package, Flowmaster. And the fuel composition effects on the fuel metering were also studied to figure out the fuel metering characteristics.