• Title/Summary/Keyword: 유량분배

Search Result 128, Processing Time 0.034 seconds

Prediction of Bedoad Transport using Lateral Distribution Method (유량 횡분배법을 이용한 소류사량 예측)

  • Choi, Sung-Uk;Lee, Jin-Hwi
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.175-179
    • /
    • 2012
  • 본 연구에서는 실제 하천에서 유사량을 산정하기 위해 유량의 횡분배법을 활용하는 방법을 제시하였다. 유량의 횡분배법은 Shiono and Knight (1990)가 제안한 방법으로, 하천의 한 측점에서 유량 및 수위가 결정된 경우 지배방정식의 해석을 통하여 횡방향으로 단위 폭 당 유량과 수심적분 유속을 구하는 방법이다. 제안된 방법을 Camenen et al. (2012)의 측정 자료에 적용하였다. Camenen et al. (2012)은 Slovakia의 Danube River에서 basket type bedload sampler를 이용하여 Gabicikovo 발전소 하류 지점에서 소류사를 채취하였다. 유량 횡분배법에 의해 계산된 수리량에 기초하여 modified Meyer-Peter and Muller 공식 (Wong and Parker, 2006)과 Camenen and Larson (2005)공식을 이용하여 횡방향 소류사 분포와 총 소류사량을 계산하였다. 제시된 소류사량 산정 기법을 Danube River의 소류사 측정 자료를 통해 검증하였다.

  • PDF

Numerical Analysis of Flow Rate Distribution of Diffusers with Various Shapes (다양한 디퓨저 형상의 유량 분배 특성에 관한 수치해석 연구)

  • Kim, Myoung Soo;Kim, Hoo Bae;Choi, Hyoung Gwon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.38 no.9
    • /
    • pp.789-795
    • /
    • 2014
  • In this study, the distribution characteristics of diffusers with various shapes that are installed in an open-type thermal storage system are numerically investigated. Four diffusers are designed to distribute a working fluid evenly through the holes on bifurcated pipes. Three-dimensional steady simulations of incompressible laminar flow are conducted using commercial software (ANSYS-FLUENT). The simulation results show that both the bidirectional header-type diffuser and the H-type diffuser distribute the working fluid evenly whereas both the unidirectional and the bidirectional diffusers distribute the working fluid unevenly. The results also show that the H-type diffuser requires a higher head of pump than the bidirectional header-type diffuser. Therefore, the bidirectional header-type diffuser is recommended for use because it enables even distribution of the working fluid and requires a low head of pump.

Computational Study on Design of the AIG for the Enhancement of Ammonia Injection in the SCR System (SCR 시스템 내 암모니아 분사 균일도 개선을 위한 AIG 설계에 관한 해석적 연구)

  • Seo, Moon-Hyeok;Chang, Hyuksang
    • Clean Technology
    • /
    • v.18 no.4
    • /
    • pp.410-418
    • /
    • 2012
  • The performance of the ammonia injection gun (AIG) used for maximizing the utilization of reducing agent in the selective catalytic reduction (SCR) system is decided by several parameters such as the pattern of flow distribution, geometry of the air distribution manifold (ADM) and the array and geometry of nozzles. In the study, the uniformity of jet flows from the nozzles in AIG was analyzed statistically by using the computational fluid dynamics (CFD) method to evaluate the role of design parameters on the performance of the SCR system. The uniformity of jet flows from the nozzles is being deteriorated with increasing the supplying flow rate to the AIG. Distribution rates to each branch pipe become lower with decreasing distance to the header, and flow rates from nozzle are also reduced with decreasing distance to the header. The uniformity of jet flows from nozzles becomes stable significantly when the ratio of summative area of nozzles to each sectional area of the branch pipe is below 0.5.

A Study on Flow Distribution to Flocculation Basins Using DOE and RSA (실험계획법과 반응표면분석법을 적용한 응집지로의 유량분배에 관한 연구)

  • Kim, Seong-Jae;Kyung, Gyu-Sun;Jeong, Heui-Jung;Kim, Hyeong-Seop;Yang, Sa-Sun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.12
    • /
    • pp.918-928
    • /
    • 2013
  • The inequitable flow distribution to flocculation basins is an important problem faced in many water treatment plants. This is caused by the structure of a distribution channel, the height differences of outlet weirs etc. But, a modified approach for the structures has no effectiveness to achieve flow equality. The aim of this study is to reduce the inequality by adopting optimized inlet valve opening (%) of the flocculation basins using DOE (Design of Experiments) and RSA (Response Surface Analysis). The inlet valve openings (%) and inflow distributions (%) of 6 paralleled basins were set as factors (X) and characteristics(Y) respectively. 2 level factorial experiments and RSA were conducted for optimization and regression analysis (Y = f(X) + Const.). Adopting the optimized inlet valve opening (%) at field, standard deviation of flow distribution (%) and effluent turbidity was declined from 3.80% to 0.42% and from 0.29 NTU to 0.03 NTU respectively.

Application of CFD model for the design of multi-layer settling basin structure (이층 침전지 설계를 위한 CFD모형의 적용)

  • Yu, Chang-Hwan;Kim, Tae-Won;Kim, Nam-Il;Lee, Kil-Seoung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1677-1680
    • /
    • 2006
  • 하수처리장의 침전지 구조물은 고형물(SS) 및 현탁물을 침전, 제거하여 하수의 정화를 도모하는 시설로 초기 유입 하수의 생물학적 처리로 인해 발생되는 슬러지와 처리수를 분리함에 그 목적을 두고 있다. 침전지 구조물은 장소의 제약 및 침전지의 효율성 측면에서 많은 공법이 제안되고 있으며, 그중 이층 침전지의 경우 구조물의 시공비용 절감 및 공간 활용측면에서 단층 침전지에 비해 우수성을 인정받고 있다. 하지만 상 하 층에 위치하고 있는 침전지 유입부의 위치적 특성으로 인해 균등한 유량의 분배가 이루어지지 않고 유량이 한곳에 집중되는 현상으로 보일 수 있다. 본 연구에서는 3차원 수치모형인 FLOW-3D를 이용하여 이층 침전지의 유량분배 최적화를 위한 설계인자를 도출 하였다. 특히 상 하층에 위치하고 있는 유입부의 위치적인 특성을 고려하여 유입부의 직경을 상층 $500mm{\sim}600mm$, 하층 $500mm{\sim}700mm$으로 변화시키며 수치모의를 수행하였으며, 유입량의 분배효과를 확인하기 위해 각 동일한 위치에서 유입량을 산정하였다. 각 케이스별 분배효과를 분석한 결과 상 하층의 유입부 직경을 상층 600mm 와 하층 700mm를 적용했을 경우 유입량의 표준편차가 가장 작게 발생하며, 침전지 내부의 흐름이 원활하게 이루어지는 것으로 확인되었다. 본 연구에서는 상용 CFD모형인 FLOW-3D를 계획 중인 H하수처리장의 이층 침전지 설계에 적용하였으며 유입부 직경에 따른 분배효과를 분석하였다.

  • PDF

A Study on the Simultaneous Ignition and Flow Distribution of Hybrid Rocket Clustering Model (하이브리드 로켓 클러스터링 모델의 동시 점화 및 유량 분배 연구)

  • Park, Sunjung;Moon, Keunhwan;Lee, Changwoo;Lee, Yeongseok;Kang, Soyoung;Moon, Heejang
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.781-786
    • /
    • 2017
  • This study aims to acquire a basic clustering technology of hybrid rocket motor for lunar lander, including the oxidizer flow distribution characteristic and the simultaneous ignition characteristic. The experimental setups were established to conduct a series of ground firing test of a clustered motor. The gaseous oxygen (GOX) and the HDPE (High Density PolyEthylene) were used as the oxidizer and the solid fuel, respectively. Experimental results which are the simultaneous pyrotechnic ignition characteristic, the oxidizer distribution characteristic and the pressure traces of each combustion chamber imply that the hybrid rocket clustered motor works successfully.

  • PDF

Experimental Study of Inlet/Outlet Flow Characteristics in Tube-side of Shell and Tube Heat Exchanger (원통-다관형 열교환기의 다관측 입출구 유동 특성의 실험적 연구)

  • Tu, Xin Cheng;Wang, Kai;Park, Seung-Ha;Kim, Hyoung-Bum
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.38 no.7
    • /
    • pp.581-588
    • /
    • 2014
  • The inlet/outlet flow in the tube-side of the shell and tube heat exchanger was experimentally measured to investigate the effect of the porous baffle on uniform flow distribution. A 1/3rd scale-downed model of a heat exchanger was used and particle image velocimetry was applied for measuring the instantaneous velocity vector fields. The absolute errors in the flow rate were calculated and compared for the tube-side with and without the porous baffle, by varying the flow rate from 60 to 90 LPM. The results revealed that the porous baffle can improve flow uniformity and reduce the absolute error in the flow rate of the model with the baffle by about 74%, compared to that without the baffle. This result can be used for improving the performance and design of the shell and tube heat exchanger.

Curves Development of Stage-Discharge Curvers for the Application of WRAP Model (WRAP 모델 적용을 위한 수위-유량 곡선 개발)

  • Kim, Jung Ho;Kim, Tae Jin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.465-465
    • /
    • 2017
  • 현재 세계적으로 급격한 도시화로 인한 지구 온난화 및 이상기후 현상은 한정된 수자원을 더욱 제한적으로 사용하게 하였고, 이는 곧 물부족 현상뿐만 아니라 물 분쟁까지 야기 시키기에 이르렀다. 이에 따라 본 연구에서는 국내 수리권에 대한 연구를 진행하였으며 수리권 해석 모델인 Water Rigths Analysis Package (WRAP)모델을 국내에 적용하고자 한다. 이를 위해 소양강댐 상류 원통지역의 10년간의 수위자료를 토대로 수위-유량곡선 변경하여 WRAP 모델 하천유량자료를 도출하였다. 이를 바탕으로 WRAP모델 적용하여 우선순위별 수자원분배를 수행하였다. 본 연구를 통한 결과를 이용하여 향후 소양강을 포함한 우리나라 다양한 하천/저수지에 우선순위를 통한 수자원의 분배 분야에 새로운 정보를 제공하고 분배를 보다 용이하게 하게 하는데 크게 기여할 수 있을 것으로 판단된다.

  • PDF

자재업체탐방 - 고른 열분배로 따뜻한 가정, 따뜻한 사회 추구, (주)상신

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • s.280
    • /
    • pp.61-66
    • /
    • 2013
  • 사랑이 가정을 평화롭고 행복하게 한다면 온기를 골고루 분배하는 열분배는 따뜻한 주거환경을 만드는 중요한 요소이다. "행복의 시작은 가정"이라는 정신으로 사람을 생각하고 에너지 절감에 기여하며 친환경 기업을 추구하는 (주)상신이 최근 스마트 유량조절시스템을 개발하고 특허 출원에 들어갔다. 1987년 창립 이래 27년간 볼밸브와 온수분배기를 최고의 제품으로 만들기 위해 최선을 다해온 상신은 주거환경을 바꾼 혁신기업으로 평가받고 있다.

  • PDF